xref: /openbmc/u-boot/include/configs/stv0991.h (revision 7810fb95)
1 /*
2  * (C) Copyright 2014
3  * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_STV0991_H
9 #define __CONFIG_STV0991_H
10 #define CONFIG_SYS_DCACHE_OFF
11 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
12 
13 #define CONFIG_SYS_CORTEX_R4
14 
15 /* ram memory-related information */
16 #define CONFIG_NR_DRAM_BANKS			1
17 #define PHYS_SDRAM_1				0x00000000
18 #define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
19 #define PHYS_SDRAM_1_SIZE			0x00198000
20 
21 #define CONFIG_ENV_SIZE				0x10000
22 #define CONFIG_ENV_IS_IN_SPI_FLASH
23 #define CONFIG_ENV_SECT_SIZE			CONFIG_ENV_SIZE
24 #define CONFIG_ENV_OFFSET			0x30000
25 #define CONFIG_ENV_ADDR				\
26 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
27 #define CONFIG_SYS_MAXARGS			16
28 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
29 
30 /* serial port (PL011) configuration */
31 #define CONFIG_PL01X_SERIAL
32 
33 /* user interface */
34 #define CONFIG_SYS_CBSIZE			1024
35 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE \
36 						+sizeof(CONFIG_SYS_PROMPT) + 16)
37 
38 /* MISC */
39 #define CONFIG_SYS_LOAD_ADDR			0x00000000
40 #define CONFIG_SYS_INIT_RAM_SIZE		0x8000
41 #define CONFIG_SYS_INIT_RAM_ADDR		0x00190000
42 #define CONFIG_SYS_INIT_SP_OFFSET		\
43 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
44 /* U-Boot Load Address */
45 #define CONFIG_SYS_TEXT_BASE			0x00010000
46 #define CONFIG_SYS_INIT_SP_ADDR			\
47 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
48 
49 /* GMAC related configs */
50 
51 #define CONFIG_MII
52 #define CONFIG_DW_ALTDESCRIPTOR
53 #define CONFIG_PHY_MICREL
54 
55 /* Command support defines */
56 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
57 
58 #define CONFIG_SYS_MEMTEST_START               0x0000
59 #define CONFIG_SYS_MEMTEST_END                 1024*1024
60 
61 /* Misc configuration */
62 #define CONFIG_SYS_LONGHELP
63 #define CONFIG_CMDLINE_EDITING
64 
65 #define CONFIG_BOOTCOMMAND                     "go 0x40040000"
66 
67 /*
68 + * QSPI support
69 + */
70 #ifdef CONFIG_OF_CONTROL		/* QSPI is controlled via DT */
71 #define CONFIG_CQSPI_DECODER		0
72 #define CONFIG_CQSPI_REF_CLK		((30/4)/2)*1000*1000
73 #define CONFIG_BOUNCE_BUFFER
74 
75 #endif
76 
77 #endif /* __CONFIG_H */
78