1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * include/configs/stout.h 4 * This file is Stout board configuration. 5 * 6 * Copyright (C) 2015 Renesas Electronics Europe GmbH 7 * Copyright (C) 2015 Renesas Electronics Corporation 8 * Copyright (C) 2015 Cogent Embedded, Inc. 9 */ 10 11 #ifndef __STOUT_H 12 #define __STOUT_H 13 14 #include "rcar-gen2-common.h" 15 16 #define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 17 #define STACK_AREA_SIZE 0x00100000 18 #define LOW_LEVEL_MERAM_STACK \ 19 (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) 20 21 /* MEMORY */ 22 #define RCAR_GEN2_SDRAM_BASE 0x40000000 23 #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) 24 #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) 25 26 /* SCIF */ 27 #define CONFIG_SCIF_A 28 29 /* SPI */ 30 #define CONFIG_SPI_FLASH_QUAD 31 32 /* SH Ether */ 33 #define CONFIG_SH_ETHER_USE_PORT 0 34 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 35 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII 36 #define CONFIG_SH_ETHER_CACHE_WRITEBACK 37 #define CONFIG_SH_ETHER_CACHE_INVALIDATE 38 #define CONFIG_SH_ETHER_ALIGNE_SIZE 64 39 #define CONFIG_BITBANGMII 40 #define CONFIG_BITBANGMII_MULTI 41 42 /* Board Clock */ 43 #define RMOBILE_XTAL_CLK 20000000u 44 #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK 45 #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) 46 47 #define CONFIG_SYS_TMU_CLK_DIV 4 48 49 #define CONFIG_EXTRA_ENV_SETTINGS \ 50 "fdt_high=0xffffffff\0" \ 51 "initrd_high=0xffffffff\0" 52 53 /* SPL support */ 54 #define CONFIG_SPL_TEXT_BASE 0xe6300000 55 #define CONFIG_SPL_STACK 0xe6340000 56 #define CONFIG_SPL_MAX_SIZE 0x4000 57 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 58 #ifdef CONFIG_SPL_BUILD 59 #define CONFIG_CONS_SCIFA0 60 #define CONFIG_SH_SCIF_CLK_FREQ 52000000 61 #endif 62 63 #endif /* __STOUT_H */ 64