1 /*
2  * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
3  * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #define CONFIG_SYS_FLASH_BASE		0x08000000
12 #define CONFIG_SYS_INIT_SP_ADDR		0x20050000
13 
14 #ifdef CONFIG_SUPPORT_SPL
15 #define CONFIG_SYS_TEXT_BASE		0x08008000
16 #define CONFIG_SYS_LOAD_ADDR		0x08008000
17 #else
18 #define CONFIG_SYS_TEXT_BASE		CONFIG_SYS_FLASH_BASE
19 #define CONFIG_SYS_LOAD_ADDR		0xC0400000
20 #define CONFIG_LOADADDR			0xC0400000
21 #endif
22 
23 /*
24  * Configuration of the external SDRAM memory
25  */
26 #define CONFIG_NR_DRAM_BANKS		1
27 
28 #define CONFIG_SYS_MAX_FLASH_SECT	8
29 #define CONFIG_SYS_MAX_FLASH_BANKS	1
30 
31 #define CONFIG_ENV_SIZE			(8 << 10)
32 
33 #define CONFIG_STM32_FLASH
34 
35 #define CONFIG_DW_GMAC_DEFAULT_DMA_PBL	(8)
36 #define CONFIG_DW_ALTDESCRIPTOR
37 #define CONFIG_MII
38 #define CONFIG_PHY_SMSC
39 
40 #define CONFIG_SYS_CLK_FREQ		200000000 /* 200 MHz */
41 #define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer is clocked at 1MHz */
42 
43 #define CONFIG_CMDLINE_TAG
44 #define CONFIG_SETUP_MEMORY_TAGS
45 #define CONFIG_INITRD_TAG
46 #define CONFIG_REVISION_TAG
47 
48 #define CONFIG_SYS_CBSIZE		1024
49 
50 #define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
51 
52 #define CONFIG_BOOTCOMMAND						\
53 	"run bootcmd_romfs"
54 
55 #define CONFIG_EXTRA_ENV_SETTINGS \
56 	"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
57 	"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
58 	"bootm 0x08044000 - 0x08042000\0"
59 
60 
61 /*
62  * Command line configuration.
63  */
64 #define CONFIG_SYS_LONGHELP
65 #define CONFIG_AUTO_COMPLETE
66 #define CONFIG_CMDLINE_EDITING
67 #define CONFIG_CMD_CACHE
68 #define CONFIG_BOARD_LATE_INIT
69 #define CONFIG_DISPLAY_BOARDINFO
70 
71 /* For SPL */
72 #ifdef CONFIG_SUPPORT_SPL
73 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
74 #define CONFIG_SPL_FRAMEWORK
75 #define CONFIG_SPL_BOARD_INIT
76 #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_FLASH_BASE
77 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
78 #define CONFIG_SYS_SPL_LEN		0x00008000
79 #define CONFIG_SYS_UBOOT_START		0x080083FD
80 #define CONFIG_SYS_UBOOT_BASE		(CONFIG_SYS_FLASH_BASE + \
81 					 CONFIG_SYS_SPL_LEN)
82 
83 /* DT blob (fdt) address */
84 #define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
85 					0x1C0000)
86 #endif
87 /* For SPL ends */
88 
89 #endif /* __CONFIG_H */
90