1 /* 2 * (C) Copyright 2009 3 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _SPEAR_COMMON_H 9 #define _SPEAR_COMMON_H 10 /* 11 * Common configurations used for both spear3xx as well as spear6xx 12 */ 13 14 /* U-boot Load Address */ 15 #define CONFIG_SYS_TEXT_BASE 0x00700000 16 17 /* Ethernet driver configuration */ 18 #define CONFIG_MII 19 #define CONFIG_DESIGNWARE_ETH 20 #define CONFIG_NET_MULTI 21 #define CONFIG_PHYLIB 22 #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ 23 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 24 25 /* USBD driver configuration */ 26 #if defined(CONFIG_SPEAR_USBTTY) 27 #define CONFIG_DW_UDC 28 #define CONFIG_USB_DEVICE 29 #define CONFIG_USBD_HS 30 #define CONFIG_USB_TTY 31 32 #define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC" 33 #define CONFIG_USBD_MANUFACTURER "ST Microelectronics" 34 35 #endif 36 37 #define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0" 38 39 /* I2C driver configuration */ 40 #define CONFIG_HARD_I2C 41 #define CONFIG_DW_I2C 42 #define CONFIG_SYS_I2C_SPEED 400000 43 #define CONFIG_SYS_I2C_SLAVE 0x02 44 45 #define CONFIG_I2C_CHIPADDRESS 0x50 46 47 /* Timer, HZ specific defines */ 48 49 /* Flash configuration */ 50 #if defined(CONFIG_FLASH_PNOR) 51 #define CONFIG_SPEAR_EMI 52 #else 53 #define CONFIG_ST_SMI 54 #endif 55 56 #if defined(CONFIG_ST_SMI) 57 58 #define CONFIG_SYS_MAX_FLASH_BANKS 2 59 #define CONFIG_SYS_FLASH_BASE 0xF8000000 60 #define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000 61 #define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 62 #define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \ 63 CONFIG_SYS_CS1_FLASH_BASE} 64 #define CONFIG_SYS_MAX_FLASH_SECT 128 65 66 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) 67 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) 68 69 #endif 70 71 /* 72 * Serial Configuration (PL011) 73 * CONFIG_PL01x_PORTS is defined in specific files 74 */ 75 #define CONFIG_PL011_SERIAL 76 #define CONFIG_PL011_CLOCK (48 * 1000 * 1000) 77 #define CONFIG_CONS_INDEX 0 78 #define CONFIG_BAUDRATE 115200 79 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \ 80 57600, 115200 } 81 82 #define CONFIG_SYS_LOADS_BAUD_CHANGE 83 84 /* NAND FLASH Configuration */ 85 #define CONFIG_SYS_NAND_SELF_INIT 86 #define CONFIG_MTD_DEVICE 87 #define CONFIG_MTD_PARTITIONS 88 #define CONFIG_NAND_FSMC 89 #define CONFIG_SYS_MAX_NAND_DEVICE 1 90 #define CONFIG_SYS_NAND_ONFI_DETECTION 91 #define CONFIG_SYS_NAND_QUIET_TEST 92 93 /* 94 * Command support defines 95 */ 96 #define CONFIG_CMD_I2C 97 #define CONFIG_CMD_NAND 98 #define CONFIG_CMD_ENV 99 #define CONFIG_CMD_MEMORY 100 #define CONFIG_CMD_RUN 101 #define CONFIG_CMD_SAVES 102 #define CONFIG_CMD_NET 103 #define CONFIG_CMD_MII 104 #define CONFIG_CMD_PING 105 #define CONFIG_CMD_DHCP 106 107 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ 108 #include <config_cmd_default.h> 109 110 /* 111 * Default Environment Varible definitions 112 */ 113 #if defined(CONFIG_SPEAR_USBTTY) 114 #define CONFIG_BOOTDELAY -1 115 #else 116 #define CONFIG_BOOTDELAY 1 117 #endif 118 119 #define CONFIG_ENV_OVERWRITE 120 121 /* 122 * U-Boot Environment placing definitions. 123 */ 124 #if defined(CONFIG_ENV_IS_IN_FLASH) 125 #ifdef CONFIG_ST_SMI 126 /* 127 * Environment is in serial NOR flash 128 */ 129 #define CONFIG_SYS_MONITOR_LEN 0x00040000 130 #define CONFIG_ENV_SECT_SIZE 0x00010000 131 #define CONFIG_FSMTDBLK "/dev/mtdblock3 " 132 133 #define CONFIG_BOOTCOMMAND "bootm 0xf8050000" 134 135 #elif defined(CONFIG_SPEAR_EMI) 136 /* 137 * Environment is in parallel NOR flash 138 */ 139 #define CONFIG_SYS_MONITOR_LEN 0x00060000 140 #define CONFIG_ENV_SECT_SIZE 0x00020000 141 #define CONFIG_FSMTDBLK "/dev/mtdblock3 " 142 143 #define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \ 144 "0x4C0000; bootm 0x1600000" 145 #endif 146 147 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ 148 CONFIG_SYS_MONITOR_LEN) 149 #elif defined(CONFIG_ENV_IS_IN_NAND) 150 /* 151 * Environment is in NAND 152 */ 153 154 #define CONFIG_ENV_OFFSET 0x60000 155 #define CONFIG_ENV_RANGE 0x10000 156 #define CONFIG_FSMTDBLK "/dev/mtdblock7 " 157 158 #define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \ 159 "0x80000 0x4C0000; " \ 160 "bootm 0x1600000" 161 #endif 162 163 #define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \ 164 "mem=128M " \ 165 "root="CONFIG_FSMTDBLK \ 166 "rootfstype=jffs2" 167 168 #define CONFIG_NFSBOOTCOMMAND \ 169 "bootp; " \ 170 "setenv bootargs root=/dev/nfs rw " \ 171 "nfsroot=$(serverip):$(rootpath) " \ 172 "ip=$(ipaddr):$(serverip):$(gatewayip):" \ 173 "$(netmask):$(hostname):$(netdev):off " \ 174 "console=ttyAMA0,115200 $(othbootargs);" \ 175 "bootm; " 176 177 #define CONFIG_RAMBOOTCOMMAND \ 178 "setenv bootargs root=/dev/ram rw " \ 179 "console=ttyAMA0,115200 $(othbootargs);" \ 180 CONFIG_BOOTCOMMAND 181 182 183 #define CONFIG_ENV_SIZE 0x02000 184 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 185 186 /* Miscellaneous configurable options */ 187 #define CONFIG_ARCH_CPU_INIT 188 #define CONFIG_BOARD_EARLY_INIT_F 189 #define CONFIG_DISPLAY_CPUINFO 190 #define CONFIG_BOOT_PARAMS_ADDR 0x00000100 191 #define CONFIG_CMDLINE_TAG 192 #define CONFIG_SETUP_MEMORY_TAGS 193 #define CONFIG_MISC_INIT_R 194 #define CONFIG_ZERO_BOOTDELAY_CHECK 195 #define CONFIG_AUTOBOOT_KEYED 196 #define CONFIG_AUTOBOOT_STOP_STR " " 197 #define CONFIG_AUTOBOOT_PROMPT \ 198 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay 199 200 #define CONFIG_SYS_MEMTEST_START 0x00800000 201 #define CONFIG_SYS_MEMTEST_END 0x04000000 202 #define CONFIG_SYS_MALLOC_LEN (1024*1024) 203 #define CONFIG_IDENT_STRING "-SPEAr" 204 #define CONFIG_SYS_LONGHELP 205 #define CONFIG_SYS_PROMPT "u-boot> " 206 #define CONFIG_CMDLINE_EDITING 207 #define CONFIG_SYS_CBSIZE 256 208 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 209 sizeof(CONFIG_SYS_PROMPT) + 16) 210 #define CONFIG_SYS_MAXARGS 16 211 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 212 #define CONFIG_SYS_LOAD_ADDR 0x00800000 213 #define CONFIG_SYS_CONSOLE_INFO_QUIET 214 215 #define CONFIG_SYS_FLASH_EMPTY_INFO 216 217 /* Physical Memory Map */ 218 #define CONFIG_NR_DRAM_BANKS 1 219 #define PHYS_SDRAM_1 0x00000000 220 #define PHYS_SDRAM_1_MAXSIZE 0x40000000 221 222 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 223 #define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000 224 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 225 226 #define CONFIG_SYS_INIT_SP_OFFSET \ 227 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 228 229 #define CONFIG_SYS_INIT_SP_ADDR \ 230 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 231 232 #endif 233