1 /* 2 * (C) Copyright 2009 3 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _SPEAR_COMMON_H 9 #define _SPEAR_COMMON_H 10 /* 11 * Common configurations used for both spear3xx as well as spear6xx 12 */ 13 14 /* U-Boot Load Address */ 15 16 /* Ethernet driver configuration */ 17 #define CONFIG_MII 18 #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ 19 20 /* USBD driver configuration */ 21 #if defined(CONFIG_SPEAR_USBTTY) 22 #define CONFIG_DW_UDC 23 #define CONFIG_USB_DEVICE 24 #define CONFIG_USBD_HS 25 #define CONFIG_USB_TTY 26 27 #define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC" 28 #define CONFIG_USBD_MANUFACTURER "ST Microelectronics" 29 30 #endif 31 32 #define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0" 33 34 /* I2C driver configuration */ 35 #define CONFIG_SYS_I2C 36 #if defined(CONFIG_SPEAR600) 37 #define CONFIG_SYS_I2C_BASE 0xD0200000 38 #elif defined(CONFIG_SPEAR300) 39 #define CONFIG_SYS_I2C_BASE 0xD0180000 40 #elif defined(CONFIG_SPEAR310) 41 #define CONFIG_SYS_I2C_BASE 0xD0180000 42 #elif defined(CONFIG_SPEAR320) 43 #define CONFIG_SYS_I2C_BASE 0xD0180000 44 #endif 45 #define CONFIG_SYS_I2C_SPEED 400000 46 #define CONFIG_SYS_I2C_SLAVE 0x02 47 48 #define CONFIG_I2C_CHIPADDRESS 0x50 49 50 /* Timer, HZ specific defines */ 51 52 /* Flash configuration */ 53 #if defined(CONFIG_FLASH_PNOR) 54 #define CONFIG_SPEAR_EMI 55 #else 56 #define CONFIG_ST_SMI 57 #endif 58 59 #if defined(CONFIG_ST_SMI) 60 61 #define CONFIG_SYS_MAX_FLASH_BANKS 2 62 #define CONFIG_SYS_FLASH_BASE 0xF8000000 63 #define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000 64 #define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 65 #define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \ 66 CONFIG_SYS_CS1_FLASH_BASE} 67 #define CONFIG_SYS_MAX_FLASH_SECT 128 68 69 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) 70 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) 71 72 #endif 73 74 /* 75 * Serial Configuration (PL011) 76 * CONFIG_PL01x_PORTS is defined in specific files 77 */ 78 #define CONFIG_PL011_CLOCK (48 * 1000 * 1000) 79 #define CONFIG_CONS_INDEX 0 80 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \ 81 57600, 115200 } 82 83 #define CONFIG_SYS_LOADS_BAUD_CHANGE 84 85 /* NAND FLASH Configuration */ 86 #define CONFIG_SYS_NAND_SELF_INIT 87 #define CONFIG_MTD_DEVICE 88 #define CONFIG_MTD_PARTITIONS 89 #define CONFIG_NAND_FSMC 90 #define CONFIG_SYS_MAX_NAND_DEVICE 1 91 #define CONFIG_SYS_NAND_ONFI_DETECTION 92 93 /* 94 * Default Environment Varible definitions 95 */ 96 #define CONFIG_ENV_OVERWRITE 97 98 /* 99 * U-Boot Environment placing definitions. 100 */ 101 #if defined(CONFIG_ENV_IS_IN_FLASH) 102 #ifdef CONFIG_ST_SMI 103 /* 104 * Environment is in serial NOR flash 105 */ 106 #define CONFIG_SYS_MONITOR_LEN 0x00040000 107 #define CONFIG_ENV_SECT_SIZE 0x00010000 108 #define CONFIG_FSMTDBLK "/dev/mtdblock3 " 109 110 #define CONFIG_BOOTCOMMAND "bootm 0xf8050000" 111 112 #elif defined(CONFIG_SPEAR_EMI) 113 /* 114 * Environment is in parallel NOR flash 115 */ 116 #define CONFIG_SYS_MONITOR_LEN 0x00060000 117 #define CONFIG_ENV_SECT_SIZE 0x00020000 118 #define CONFIG_FSMTDBLK "/dev/mtdblock3 " 119 120 #define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \ 121 "0x4C0000; bootm 0x1600000" 122 #endif 123 124 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ 125 CONFIG_SYS_MONITOR_LEN) 126 #elif defined(CONFIG_ENV_IS_IN_NAND) 127 /* 128 * Environment is in NAND 129 */ 130 131 #define CONFIG_ENV_OFFSET 0x60000 132 #define CONFIG_ENV_RANGE 0x10000 133 #define CONFIG_FSMTDBLK "/dev/mtdblock7 " 134 135 #define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \ 136 "0x80000 0x4C0000; " \ 137 "bootm 0x1600000" 138 #endif 139 140 #define CONFIG_NFSBOOTCOMMAND \ 141 "bootp; " \ 142 "setenv bootargs root=/dev/nfs rw " \ 143 "nfsroot=$(serverip):$(rootpath) " \ 144 "ip=$(ipaddr):$(serverip):$(gatewayip):" \ 145 "$(netmask):$(hostname):$(netdev):off " \ 146 "console=ttyAMA0,115200 $(othbootargs);" \ 147 "bootm; " 148 149 #define CONFIG_RAMBOOTCOMMAND \ 150 "setenv bootargs root=/dev/ram rw " \ 151 "console=ttyAMA0,115200 $(othbootargs);" \ 152 CONFIG_BOOTCOMMAND 153 154 #define CONFIG_ENV_SIZE 0x02000 155 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 156 157 /* Miscellaneous configurable options */ 158 #define CONFIG_ARCH_CPU_INIT 159 #define CONFIG_BOOT_PARAMS_ADDR 0x00000100 160 #define CONFIG_CMDLINE_TAG 161 #define CONFIG_SETUP_MEMORY_TAGS 162 #define CONFIG_MISC_INIT_R 163 164 #define CONFIG_SYS_MEMTEST_START 0x00800000 165 #define CONFIG_SYS_MEMTEST_END 0x04000000 166 #define CONFIG_SYS_MALLOC_LEN (1024*1024) 167 #define CONFIG_SYS_LOAD_ADDR 0x00800000 168 169 #define CONFIG_SYS_FLASH_EMPTY_INFO 170 171 /* Physical Memory Map */ 172 #define CONFIG_NR_DRAM_BANKS 1 173 #define PHYS_SDRAM_1 0x00000000 174 #define PHYS_SDRAM_1_MAXSIZE 0x40000000 175 176 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 177 #define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000 178 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 179 180 #define CONFIG_SYS_INIT_SP_OFFSET \ 181 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 182 183 #define CONFIG_SYS_INIT_SP_ADDR \ 184 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 185 186 #endif 187