1 /* 2 * Copyright (C) 2012 Altera Corporation <www.altera.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 #ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ 7 #define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ 8 9 #define CONFIG_SYS_GENERIC_BOARD 10 11 /* Virtual target or real hardware */ 12 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET 13 14 #define CONFIG_SYS_THUMB_BUILD 15 16 #define CONFIG_SOCFPGA 17 18 /* 19 * High level configuration 20 */ 21 #define CONFIG_DISPLAY_CPUINFO 22 #define CONFIG_DISPLAY_BOARDINFO 23 #define CONFIG_BOARD_EARLY_INIT_F 24 #define CONFIG_ARCH_EARLY_INIT_R 25 #define CONFIG_SYS_NO_FLASH 26 #define CONFIG_CLOCKS 27 28 #define CONFIG_FIT 29 #define CONFIG_OF_LIBFDT 30 #define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024) 31 32 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 33 34 /* 35 * Memory configurations 36 */ 37 #define CONFIG_NR_DRAM_BANKS 1 38 #define PHYS_SDRAM_1 0x0 39 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) 40 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 41 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE 42 43 #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 44 #define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100) 45 #define CONFIG_SYS_INIT_SP_ADDR \ 46 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - \ 47 GENERATED_GBL_DATA_SIZE) 48 49 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 50 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET 51 #define CONFIG_SYS_TEXT_BASE 0x08000040 52 #else 53 #define CONFIG_SYS_TEXT_BASE 0x01000040 54 #endif 55 56 /* 57 * U-Boot general configurations 58 */ 59 #define CONFIG_SYS_LONGHELP 60 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ 61 #define CONFIG_SYS_PBSIZE \ 62 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 63 /* Print buffer size */ 64 #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ 65 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 66 /* Boot argument buffer size */ 67 #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ 68 #define CONFIG_AUTO_COMPLETE /* Command auto complete */ 69 #define CONFIG_CMDLINE_EDITING /* Command history etc */ 70 #define CONFIG_SYS_HUSH_PARSER 71 72 /* 73 * Cache 74 */ 75 #define CONFIG_SYS_ARM_CACHE_WRITEALLOC 76 #define CONFIG_SYS_CACHELINE_SIZE 32 77 #define CONFIG_SYS_L2_PL310 78 #define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS 79 80 /* 81 * EPCS/EPCQx1 Serial Flash Controller 82 */ 83 #ifdef CONFIG_ALTERA_SPI 84 #define CONFIG_CMD_SPI 85 #define CONFIG_CMD_SF 86 #define CONFIG_SF_DEFAULT_SPEED 30000000 87 #define CONFIG_SPI_FLASH 88 #define CONFIG_SPI_FLASH_STMICRO 89 #define CONFIG_SPI_FLASH_BAR 90 /* 91 * The base address is configurable in QSys, each board must specify the 92 * base address based on it's particular FPGA configuration. Please note 93 * that the address here is incremented by 0x400 from the Base address 94 * selected in QSys, since the SPI registers are at offset +0x400. 95 * #define CONFIG_SYS_SPI_BASE 0xff240400 96 */ 97 #endif 98 99 /* 100 * Ethernet on SoC (EMAC) 101 */ 102 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) 103 #define CONFIG_DESIGNWARE_ETH 104 #define CONFIG_NET_MULTI 105 #define CONFIG_DW_ALTDESCRIPTOR 106 #define CONFIG_MII 107 #define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ) 108 #define CONFIG_PHYLIB 109 #define CONFIG_PHY_GIGE 110 #endif 111 112 /* 113 * FPGA Driver 114 */ 115 #ifdef CONFIG_CMD_FPGA 116 #define CONFIG_FPGA 117 #define CONFIG_FPGA_ALTERA 118 #define CONFIG_FPGA_SOCFPGA 119 #define CONFIG_FPGA_COUNT 1 120 #endif 121 122 /* 123 * L4 OSC1 Timer 0 124 */ 125 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */ 126 #define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS 127 #define CONFIG_SYS_TIMER_COUNTS_DOWN 128 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) 129 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET 130 #define CONFIG_SYS_TIMER_RATE 2400000 131 #else 132 #define CONFIG_SYS_TIMER_RATE 25000000 133 #endif 134 135 /* 136 * L4 Watchdog 137 */ 138 #ifdef CONFIG_HW_WATCHDOG 139 #define CONFIG_DESIGNWARE_WATCHDOG 140 #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS 141 #define CONFIG_DW_WDT_CLOCK_KHZ 25000 142 #define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000 143 #endif 144 145 /* 146 * MMC Driver 147 */ 148 #ifdef CONFIG_CMD_MMC 149 #define CONFIG_MMC 150 #define CONFIG_BOUNCE_BUFFER 151 #define CONFIG_GENERIC_MMC 152 #define CONFIG_DWMMC 153 #define CONFIG_SOCFPGA_DWMMC 154 #define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024 155 #define CONFIG_SOCFPGA_DWMMC_DRVSEL 3 156 #define CONFIG_SOCFPGA_DWMMC_SMPSEL 0 157 /* FIXME */ 158 /* using smaller max blk cnt to avoid flooding the limited stack we have */ 159 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */ 160 #endif 161 162 /* 163 * I2C support 164 */ 165 #define CONFIG_SYS_I2C 166 #define CONFIG_SYS_I2C_DW 167 #define CONFIG_SYS_I2C_BUS_MAX 4 168 #define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS 169 #define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS 170 #define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS 171 #define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS 172 /* Using standard mode which the speed up to 100Kb/s */ 173 #define CONFIG_SYS_I2C_SPEED 100000 174 #define CONFIG_SYS_I2C_SPEED1 100000 175 #define CONFIG_SYS_I2C_SPEED2 100000 176 #define CONFIG_SYS_I2C_SPEED3 100000 177 /* Address of device when used as slave */ 178 #define CONFIG_SYS_I2C_SLAVE 0x02 179 #define CONFIG_SYS_I2C_SLAVE1 0x02 180 #define CONFIG_SYS_I2C_SLAVE2 0x02 181 #define CONFIG_SYS_I2C_SLAVE3 0x02 182 #ifndef __ASSEMBLY__ 183 /* Clock supplied to I2C controller in unit of MHz */ 184 unsigned int cm_get_l4_sp_clk_hz(void); 185 #define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000) 186 #endif 187 #define CONFIG_CMD_I2C 188 189 /* 190 * QSPI support 191 */ 192 #ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ 193 #define CONFIG_CADENCE_QSPI 194 /* Enable multiple SPI NOR flash manufacturers */ 195 #define CONFIG_SPI_FLASH /* SPI flash subsystem */ 196 #define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */ 197 #define CONFIG_SPI_FLASH_SPANSION /* Spansion flash */ 198 #define CONFIG_SPI_FLASH_MTD 199 /* QSPI reference clock */ 200 #ifndef __ASSEMBLY__ 201 unsigned int cm_get_qspi_controller_clk_hz(void); 202 #define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() 203 #endif 204 #define CONFIG_CQSPI_DECODER 0 205 #define CONFIG_CMD_SF 206 #endif 207 208 #ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */ 209 #define CONFIG_DESIGNWARE_SPI 210 #define CONFIG_CMD_SPI 211 #endif 212 213 /* 214 * Serial Driver 215 */ 216 #define CONFIG_SYS_NS16550 217 #define CONFIG_SYS_NS16550_SERIAL 218 #define CONFIG_SYS_NS16550_REG_SIZE -4 219 #define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS 220 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET 221 #define CONFIG_SYS_NS16550_CLK 1000000 222 #else 223 #define CONFIG_SYS_NS16550_CLK 100000000 224 #endif 225 #define CONFIG_CONS_INDEX 1 226 #define CONFIG_BAUDRATE 115200 227 228 /* 229 * USB 230 */ 231 #ifdef CONFIG_CMD_USB 232 #define CONFIG_USB_DWC2 233 #define CONFIG_USB_STORAGE 234 /* 235 * NOTE: User must define either of the following to select which 236 * of the two USB controllers available on SoCFPGA to use. 237 * The DWC2 driver doesn't support multiple USB controllers. 238 * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS 239 * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS 240 */ 241 #endif 242 243 /* 244 * USB Gadget (DFU, UMS) 245 */ 246 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) 247 #define CONFIG_USB_GADGET 248 #define CONFIG_USB_GADGET_S3C_UDC_OTG 249 #define CONFIG_USB_GADGET_DUALSPEED 250 #define CONFIG_USB_GADGET_VBUS_DRAW 2 251 252 /* USB Composite download gadget - g_dnl */ 253 #define CONFIG_USBDOWNLOAD_GADGET 254 #define CONFIG_USB_GADGET_MASS_STORAGE 255 256 #define CONFIG_DFU_FUNCTION 257 #define CONFIG_DFU_MMC 258 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) 259 #define DFU_DEFAULT_POLL_TIMEOUT 300 260 261 /* USB IDs */ 262 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */ 263 #define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */ 264 #define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM 265 #define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM 266 #ifndef CONFIG_G_DNL_MANUFACTURER 267 #define CONFIG_G_DNL_MANUFACTURER "Altera" 268 #endif 269 #endif 270 271 /* 272 * U-Boot environment 273 */ 274 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 275 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 276 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 277 #define CONFIG_ENV_IS_NOWHERE 278 #define CONFIG_ENV_SIZE 4096 279 280 /* 281 * SPL 282 * 283 * SRAM Memory layout: 284 * 285 * 0xFFFF_0000 ...... Start of SRAM 286 * 0xFFFF_xxxx ...... Top of stack (grows down) 287 * 0xFFFF_yyyy ...... Malloc area 288 * 0xFFFF_zzzz ...... Global Data 289 * 0xFFFF_FF00 ...... End of SRAM 290 */ 291 #define CONFIG_SPL_FRAMEWORK 292 #define CONFIG_SPL_BOARD_INIT 293 #define CONFIG_SPL_RAM_DEVICE 294 #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR 295 #define CONFIG_SYS_SPL_MALLOC_START CONFIG_SYS_INIT_SP_ADDR 296 #define CONFIG_SYS_SPL_MALLOC_SIZE (5 * 1024) 297 298 #define CHUNKSZ_CRC32 (1 * 1024) /* FIXME: ewww */ 299 #define CONFIG_CRC32_VERIFY 300 301 /* Linker script for SPL */ 302 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds" 303 304 #define CONFIG_SPL_LIBCOMMON_SUPPORT 305 #define CONFIG_SPL_LIBGENERIC_SUPPORT 306 #define CONFIG_SPL_WATCHDOG_SUPPORT 307 #define CONFIG_SPL_SERIAL_SUPPORT 308 309 #ifdef CONFIG_SPL_BUILD 310 #undef CONFIG_PARTITIONS 311 #endif 312 313 #endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */ 314