1 /* 2 * Copyright (C) 2012 Altera Corporation <www.altera.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 #ifndef __CONFIG_SOCFPGA_COMMON_H__ 7 #define __CONFIG_SOCFPGA_COMMON_H__ 8 9 10 /* Virtual target or real hardware */ 11 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET 12 13 #define CONFIG_SYS_THUMB_BUILD 14 15 /* 16 * High level configuration 17 */ 18 #define CONFIG_DISPLAY_CPUINFO 19 #define CONFIG_DISPLAY_BOARDINFO_LATE 20 #define CONFIG_ARCH_MISC_INIT 21 #define CONFIG_ARCH_EARLY_INIT_R 22 #define CONFIG_SYS_NO_FLASH 23 #define CONFIG_CLOCKS 24 25 #define CONFIG_CRC32_VERIFY 26 27 #define CONFIG_FIT 28 #define CONFIG_OF_LIBFDT 29 #define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024) 30 31 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 32 33 /* 34 * Memory configurations 35 */ 36 #define CONFIG_NR_DRAM_BANKS 1 37 #define PHYS_SDRAM_1 0x0 38 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) 39 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 40 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE 41 42 #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 43 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 44 #define CONFIG_SYS_INIT_SP_OFFSET \ 45 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 46 #define CONFIG_SYS_INIT_SP_ADDR \ 47 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 48 49 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 50 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET 51 #define CONFIG_SYS_TEXT_BASE 0x08000040 52 #else 53 #define CONFIG_SYS_TEXT_BASE 0x01000040 54 #endif 55 56 /* 57 * U-Boot general configurations 58 */ 59 #define CONFIG_SYS_LONGHELP 60 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ 61 #define CONFIG_SYS_PBSIZE \ 62 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 63 /* Print buffer size */ 64 #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ 65 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 66 /* Boot argument buffer size */ 67 #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ 68 #define CONFIG_AUTO_COMPLETE /* Command auto complete */ 69 #define CONFIG_CMDLINE_EDITING /* Command history etc */ 70 #define CONFIG_SYS_HUSH_PARSER 71 72 #ifndef CONFIG_SYS_HOSTNAME 73 #define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD 74 #endif 75 76 /* 77 * Cache 78 */ 79 #define CONFIG_SYS_CACHELINE_SIZE 32 80 #define CONFIG_SYS_L2_PL310 81 #define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS 82 83 /* 84 * SDRAM controller 85 */ 86 #define CONFIG_ALTERA_SDRAM 87 88 /* 89 * EPCS/EPCQx1 Serial Flash Controller 90 */ 91 #ifdef CONFIG_ALTERA_SPI 92 #define CONFIG_CMD_SPI 93 #define CONFIG_CMD_SF 94 #define CONFIG_SF_DEFAULT_SPEED 30000000 95 #define CONFIG_SPI_FLASH_BAR 96 /* 97 * The base address is configurable in QSys, each board must specify the 98 * base address based on it's particular FPGA configuration. Please note 99 * that the address here is incremented by 0x400 from the Base address 100 * selected in QSys, since the SPI registers are at offset +0x400. 101 * #define CONFIG_SYS_SPI_BASE 0xff240400 102 */ 103 #endif 104 105 /* 106 * Ethernet on SoC (EMAC) 107 */ 108 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) 109 #define CONFIG_DW_ALTDESCRIPTOR 110 #define CONFIG_MII 111 #define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ) 112 #define CONFIG_PHY_GIGE 113 #endif 114 115 /* 116 * FPGA Driver 117 */ 118 #ifdef CONFIG_CMD_FPGA 119 #define CONFIG_FPGA 120 #define CONFIG_FPGA_ALTERA 121 #define CONFIG_FPGA_SOCFPGA 122 #define CONFIG_FPGA_COUNT 1 123 #endif 124 125 /* 126 * L4 OSC1 Timer 0 127 */ 128 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */ 129 #define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS 130 #define CONFIG_SYS_TIMER_COUNTS_DOWN 131 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) 132 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET 133 #define CONFIG_SYS_TIMER_RATE 2400000 134 #else 135 #define CONFIG_SYS_TIMER_RATE 25000000 136 #endif 137 138 /* 139 * L4 Watchdog 140 */ 141 #ifdef CONFIG_HW_WATCHDOG 142 #define CONFIG_DESIGNWARE_WATCHDOG 143 #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS 144 #define CONFIG_DW_WDT_CLOCK_KHZ 25000 145 #define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000 146 #endif 147 148 /* 149 * MMC Driver 150 */ 151 #ifdef CONFIG_CMD_MMC 152 #define CONFIG_MMC 153 #define CONFIG_BOUNCE_BUFFER 154 #define CONFIG_GENERIC_MMC 155 #define CONFIG_DWMMC 156 #define CONFIG_SOCFPGA_DWMMC 157 #define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024 158 /* FIXME */ 159 /* using smaller max blk cnt to avoid flooding the limited stack we have */ 160 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */ 161 #endif 162 163 /* 164 * NAND Support 165 */ 166 #ifdef CONFIG_NAND_DENALI 167 #define CONFIG_SYS_MAX_NAND_DEVICE 1 168 #define CONFIG_SYS_NAND_MAX_CHIPS 1 169 #define CONFIG_SYS_NAND_ONFI_DETECTION 170 #define CONFIG_NAND_DENALI_ECC_SIZE 512 171 #define CONFIG_SYS_NAND_REGS_BASE SOCFPGA_NANDREGS_ADDRESS 172 #define CONFIG_SYS_NAND_DATA_BASE SOCFPGA_NANDDATA_ADDRESS 173 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) 174 #endif 175 176 /* 177 * I2C support 178 */ 179 #define CONFIG_SYS_I2C 180 #define CONFIG_SYS_I2C_DW 181 #define CONFIG_SYS_I2C_BUS_MAX 4 182 #define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS 183 #define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS 184 #define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS 185 #define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS 186 /* Using standard mode which the speed up to 100Kb/s */ 187 #define CONFIG_SYS_I2C_SPEED 100000 188 #define CONFIG_SYS_I2C_SPEED1 100000 189 #define CONFIG_SYS_I2C_SPEED2 100000 190 #define CONFIG_SYS_I2C_SPEED3 100000 191 /* Address of device when used as slave */ 192 #define CONFIG_SYS_I2C_SLAVE 0x02 193 #define CONFIG_SYS_I2C_SLAVE1 0x02 194 #define CONFIG_SYS_I2C_SLAVE2 0x02 195 #define CONFIG_SYS_I2C_SLAVE3 0x02 196 #ifndef __ASSEMBLY__ 197 /* Clock supplied to I2C controller in unit of MHz */ 198 unsigned int cm_get_l4_sp_clk_hz(void); 199 #define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000) 200 #endif 201 #define CONFIG_CMD_I2C 202 203 /* 204 * QSPI support 205 */ 206 /* Enable multiple SPI NOR flash manufacturers */ 207 #ifndef CONFIG_SPL_BUILD 208 #define CONFIG_SPI_FLASH_MTD 209 #define CONFIG_CMD_MTDPARTS 210 #define CONFIG_MTD_DEVICE 211 #define CONFIG_MTD_PARTITIONS 212 #define MTDIDS_DEFAULT "nor0=ff705000.spi.0" 213 #endif 214 /* QSPI reference clock */ 215 #ifndef __ASSEMBLY__ 216 unsigned int cm_get_qspi_controller_clk_hz(void); 217 #define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() 218 #endif 219 #define CONFIG_CQSPI_DECODER 0 220 #define CONFIG_CMD_SF 221 #define CONFIG_SPI_FLASH_BAR 222 223 /* 224 * Designware SPI support 225 */ 226 #define CONFIG_CMD_SPI 227 228 /* 229 * Serial Driver 230 */ 231 #define CONFIG_SYS_NS16550_SERIAL 232 #define CONFIG_SYS_NS16550_REG_SIZE -4 233 #define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS 234 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET 235 #define CONFIG_SYS_NS16550_CLK 1000000 236 #else 237 #define CONFIG_SYS_NS16550_CLK 100000000 238 #endif 239 #define CONFIG_CONS_INDEX 1 240 #define CONFIG_BAUDRATE 115200 241 242 /* 243 * USB 244 */ 245 #ifdef CONFIG_CMD_USB 246 #define CONFIG_USB_DWC2 247 #define CONFIG_USB_STORAGE 248 #endif 249 250 /* 251 * USB Gadget (DFU, UMS) 252 */ 253 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) 254 #define CONFIG_USB_GADGET 255 #define CONFIG_USB_GADGET_DWC2_OTG 256 #define CONFIG_USB_GADGET_DUALSPEED 257 #define CONFIG_USB_GADGET_VBUS_DRAW 2 258 259 /* USB Composite download gadget - g_dnl */ 260 #define CONFIG_USB_GADGET_DOWNLOAD 261 #define CONFIG_USB_FUNCTION_MASS_STORAGE 262 263 #define CONFIG_USB_FUNCTION_DFU 264 #ifdef CONFIG_DM_MMC 265 #define CONFIG_DFU_MMC 266 #endif 267 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) 268 #define DFU_DEFAULT_POLL_TIMEOUT 300 269 270 /* USB IDs */ 271 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */ 272 #define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */ 273 #define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM 274 #define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM 275 #ifndef CONFIG_G_DNL_MANUFACTURER 276 #define CONFIG_G_DNL_MANUFACTURER CONFIG_SYS_VENDOR 277 #endif 278 #endif 279 280 /* 281 * U-Boot environment 282 */ 283 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 284 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 285 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 286 #define CONFIG_ENV_SIZE 4096 287 288 /* Environment for SDMMC boot */ 289 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET) 290 #define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ 291 #define CONFIG_ENV_OFFSET 512 /* just after the MBR */ 292 #endif 293 294 /* 295 * mtd partitioning for serial NOR flash 296 * 297 * device nor0 <ff705000.spi.0>, # parts = 6 298 * #: name size offset mask_flags 299 * 0: u-boot 0x00100000 0x00000000 0 300 * 1: env1 0x00040000 0x00100000 0 301 * 2: env2 0x00040000 0x00140000 0 302 * 3: UBI 0x03e80000 0x00180000 0 303 * 4: boot 0x00e80000 0x00180000 0 304 * 5: rootfs 0x01000000 0x01000000 0 305 * 306 */ 307 #if defined(CONFIG_CMD_SF) && !defined(MTDPARTS_DEFAULT) 308 #define MTDPARTS_DEFAULT "mtdparts=ff705000.spi.0:"\ 309 "1m(u-boot)," \ 310 "256k(env1)," \ 311 "256k(env2)," \ 312 "14848k(boot)," \ 313 "16m(rootfs)," \ 314 "-@1536k(UBI)\0" 315 #endif 316 317 /* UBI and UBIFS support */ 318 #if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND) 319 #define CONFIG_CMD_UBI 320 #define CONFIG_CMD_UBIFS 321 #define CONFIG_RBTREE 322 #define CONFIG_LZO 323 #endif 324 325 /* 326 * SPL 327 * 328 * SRAM Memory layout: 329 * 330 * 0xFFFF_0000 ...... Start of SRAM 331 * 0xFFFF_xxxx ...... Top of stack (grows down) 332 * 0xFFFF_yyyy ...... Malloc area 333 * 0xFFFF_zzzz ...... Global Data 334 * 0xFFFF_FF00 ...... End of SRAM 335 */ 336 #define CONFIG_SPL_FRAMEWORK 337 #define CONFIG_SPL_RAM_DEVICE 338 #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR 339 #define CONFIG_SPL_MAX_SIZE (64 * 1024) 340 #ifdef CONFIG_SPL_BUILD 341 #define CONFIG_SYS_MALLOC_SIMPLE 342 #endif 343 344 #define CONFIG_SPL_LIBCOMMON_SUPPORT 345 #define CONFIG_SPL_LIBGENERIC_SUPPORT 346 #define CONFIG_SPL_WATCHDOG_SUPPORT 347 #define CONFIG_SPL_SERIAL_SUPPORT 348 #ifdef CONFIG_DM_MMC 349 #define CONFIG_SPL_MMC_SUPPORT 350 #endif 351 #ifdef CONFIG_DM_SPI 352 #define CONFIG_SPL_SPI_SUPPORT 353 #endif 354 #ifdef CONFIG_SPL_NAND_DENALI 355 #define CONFIG_SPL_NAND_SUPPORT 356 #endif 357 358 /* SPL SDMMC boot support */ 359 #ifdef CONFIG_SPL_MMC_SUPPORT 360 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) 361 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2 362 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" 363 #define CONFIG_SPL_LIBDISK_SUPPORT 364 #else 365 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 3 366 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xa00 /* offset 2560 sect (1M+256k) */ 367 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ 368 #endif 369 #endif 370 371 /* SPL QSPI boot support */ 372 #ifdef CONFIG_SPL_SPI_SUPPORT 373 #define CONFIG_DM_SEQ_ALIAS 1 374 #define CONFIG_SPL_SPI_FLASH_SUPPORT 375 #define CONFIG_SPL_SPI_LOAD 376 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 377 #endif 378 379 /* SPL NAND boot support */ 380 #ifdef CONFIG_SPL_NAND_SUPPORT 381 #define CONFIG_SYS_NAND_USE_FLASH_BBT 382 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 383 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 384 #endif 385 386 /* 387 * Stack setup 388 */ 389 #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR 390 391 #endif /* __CONFIG_SOCFPGA_COMMON_H__ */ 392