xref: /openbmc/u-boot/include/configs/sniper.h (revision cf0bcd7d)
1 /*
2  * LG Optimus Black codename sniper config
3  *
4  * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
14 
15 /*
16  * CPU
17  */
18 
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
20 
21 /*
22  * Board
23  */
24 
25 #define CONFIG_MISC_INIT_R
26 
27 /*
28  * Clocks
29  */
30 
31 #define CONFIG_SYS_TIMERBASE	OMAP34XX_GPT2
32 #define CONFIG_SYS_PTV		2
33 
34 #define V_NS16550_CLK		48000000
35 #define V_OSCK			26000000
36 #define V_SCLK			(V_OSCK >> 1)
37 
38 /*
39  * DRAM
40  */
41 
42 #define CONFIG_NR_DRAM_BANKS	2
43 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
44 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
45 
46 /*
47  * Memory
48  */
49 
50 #define CONFIG_SYS_SDRAM_BASE		0x80000000
51 #define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
52 					 GENERATED_GBL_DATA_SIZE)
53 
54 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024 + CONFIG_ENV_SIZE)
55 
56 /*
57  * I2C
58  */
59 
60 #define CONFIG_SYS_I2C
61 #define CONFIG_I2C_MULTI_BUS
62 
63 /*
64  * Input
65  */
66 
67 #define CONFIG_TWL4030_INPUT
68 
69 /*
70  * SPL
71  */
72 
73 #define CONFIG_SPL_TEXT_BASE		0x40200000
74 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
75 					 CONFIG_SPL_TEXT_BASE)
76 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
77 #define CONFIG_SPL_BSS_MAX_SIZE		(512 * 1024)
78 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
79 #define CONFIG_SYS_SPL_MALLOC_SIZE	(1024 * 1024)
80 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
81 
82 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		1
83 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME			"u-boot.img"
84 
85 #define CONFIG_SYS_CBSIZE	512
86 
87 /*
88  * Serial
89  */
90 
91 #ifdef CONFIG_SPL_BUILD
92 #define CONFIG_SYS_NS16550_SERIAL
93 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
94 #endif
95 
96 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
97 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
98 
99 #define CONFIG_SYS_BAUDRATE_TABLE	{ 4800, 9600, 19200, 38400, 57600, \
100 					  115200 }
101 
102 /*
103  * Environment
104  */
105 
106 #define CONFIG_ENV_SIZE		(128 * 1024)
107 
108 #define CONFIG_ENV_OVERWRITE
109 
110 #define CONFIG_EXTRA_ENV_SETTINGS \
111 	"kernel_addr_r=0x82000000\0" \
112 	"loadaddr=0x82000000\0" \
113 	"fdt_addr_r=0x88000000\0" \
114 	"fdtaddr=0x88000000\0" \
115 	"ramdisk_addr_r=0x88080000\0" \
116 	"pxefile_addr_r=0x80100000\0" \
117 	"scriptaddr=0x80000000\0" \
118 	"bootm_size=0x10000000\0" \
119 	"boot_mmc_dev=0\0" \
120 	"kernel_mmc_part=3\0" \
121 	"recovery_mmc_part=4\0" \
122 	"fdtfile=omap3-sniper.dtb\0" \
123 	"bootfile=/boot/extlinux/extlinux.conf\0" \
124 	"bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
125 
126 /*
127  * ATAGs
128  */
129 
130 #define CONFIG_SETUP_MEMORY_TAGS
131 #define CONFIG_CMDLINE_TAG
132 #define CONFIG_INITRD_TAG
133 #define CONFIG_REVISION_TAG
134 #define CONFIG_SERIAL_TAG
135 
136 /*
137  * Boot
138  */
139 
140 #define CONFIG_SYS_LOAD_ADDR	0x82000000
141 
142 #define CONFIG_BOOTCOMMAND \
143 	"setenv boot_mmc_part ${kernel_mmc_part}; " \
144 	"if test reboot-${reboot-mode} = reboot-r; then " \
145 	"echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
146 	"if test reboot-${reboot-mode} = reboot-b; then " \
147 	"echo fastboot; fastboot 0; fi; " \
148 	"part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
149 	"part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
150 	"mmc dev ${boot_mmc_dev}; " \
151 	"mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
152 	"bootm ${kernel_addr_r};"
153 
154 /*
155  * Defaults
156  */
157 
158 #include <config_defaults.h>
159 
160 #endif
161