xref: /openbmc/u-boot/include/configs/sniper.h (revision 31c98cbb)
1 /*
2  * LG Optimus Black codename sniper config
3  *
4  * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
14 
15 /*
16  * CPU
17  */
18 
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
20 #define CONFIG_ARM_ERRATA_454179
21 #define CONFIG_ARM_ERRATA_430973
22 #define CONFIG_ARM_ERRATA_621766
23 
24 /*
25  * Platform
26  */
27 
28 #define CONFIG_OMAP
29 #define CONFIG_OMAP_COMMON
30 
31 /*
32  * Board
33  */
34 
35 #define CONFIG_MISC_INIT_R
36 
37 /*
38  * Clocks
39  */
40 
41 #define CONFIG_SYS_TIMERBASE	OMAP34XX_GPT2
42 #define CONFIG_SYS_PTV		2
43 
44 #define V_NS16550_CLK		48000000
45 #define V_OSCK			26000000
46 #define V_SCLK			(V_OSCK >> 1)
47 
48 /*
49  * DRAM
50  */
51 
52 #define CONFIG_SDRC
53 #define CONFIG_NR_DRAM_BANKS	2
54 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
55 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
56 
57 /*
58  * Memory
59  */
60 
61 #define CONFIG_SYS_TEXT_BASE		0x80100000
62 #define CONFIG_SYS_SDRAM_BASE		0x80000000
63 #define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
64 					 GENERATED_GBL_DATA_SIZE)
65 
66 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024 + CONFIG_ENV_SIZE)
67 
68 /*
69  * GPIO
70  */
71 
72 #define CONFIG_OMAP_GPIO
73 #define CONFIG_OMAP3_GPIO_2
74 #define CONFIG_OMAP3_GPIO_3
75 #define CONFIG_OMAP3_GPIO_4
76 #define CONFIG_OMAP3_GPIO_5
77 #define CONFIG_OMAP3_GPIO_6
78 
79 /*
80  * I2C
81  */
82 
83 #define CONFIG_SYS_I2C
84 #define CONFIG_SYS_OMAP24_I2C_SPEED	400000
85 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
86 #define CONFIG_SYS_I2C_OMAP34XX
87 #define CONFIG_I2C_MULTI_BUS
88 
89 /*
90  * Flash
91  */
92 
93 #define CONFIG_SYS_NO_FLASH
94 
95 /*
96  * MMC
97  */
98 
99 #define CONFIG_MMC
100 #define CONFIG_GENERIC_MMC
101 #define CONFIG_OMAP_HSMMC
102 
103 /*
104  * Power
105  */
106 
107 #define CONFIG_TWL4030_POWER
108 
109 /*
110  * Input
111  */
112 
113 #define CONFIG_TWL4030_INPUT
114 
115 /*
116  * Partitions
117  */
118 
119 #define CONFIG_PARTITION_UUIDS
120 #define CONFIG_CMD_PART
121 
122 /*
123  * SPL
124  */
125 
126 #define CONFIG_SPL_FRAMEWORK
127 
128 #define CONFIG_SPL_TEXT_BASE		0x40200000
129 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)
130 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
131 #define CONFIG_SPL_BSS_MAX_SIZE		(512 * 1024)
132 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
133 #define CONFIG_SYS_SPL_MALLOC_SIZE	(1024 * 1024)
134 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
135 
136 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
137 #define CONFIG_SPL_BOARD_INIT
138 
139 #define CONFIG_SPL_LIBGENERIC_SUPPORT
140 #define CONFIG_SPL_LIBCOMMON_SUPPORT
141 #define CONFIG_SPL_LIBDISK_SUPPORT
142 #define CONFIG_SPL_SERIAL_SUPPORT
143 #define CONFIG_SPL_POWER_SUPPORT
144 #define CONFIG_SPL_GPIO_SUPPORT
145 #define CONFIG_SPL_I2C_SUPPORT
146 #define CONFIG_SPL_MMC_SUPPORT
147 #define CONFIG_SPL_FAT_SUPPORT
148 
149 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION	2
150 
151 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		1
152 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME			"u-boot.img"
153 
154 /*
155  * Console
156  */
157 
158 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
159 
160 #define CONFIG_DISPLAY_CPUINFO
161 #define CONFIG_DISPLAY_BOARDINFO
162 
163 #define CONFIG_AUTO_COMPLETE
164 
165 #define CONFIG_SYS_LONGHELP
166 
167 #define CONFIG_SYS_MAXARGS	16
168 #define CONFIG_SYS_CBSIZE	512
169 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
170 				 + 16)
171 
172 /*
173  * Serial
174  */
175 
176 #ifdef CONFIG_SPL_BUILD
177 #define CONFIG_SYS_NS16550_SERIAL
178 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
179 #endif
180 
181 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
182 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
183 #define CONFIG_CONS_INDEX		3
184 
185 #define CONFIG_BAUDRATE			115200
186 #define CONFIG_SYS_BAUDRATE_TABLE	{ 4800, 9600, 19200, 38400, 57600, \
187 					  115200 }
188 
189 /*
190  * USB gadget
191  */
192 
193 #define CONFIG_USB_MUSB_PIO_ONLY
194 #define CONFIG_USB_MUSB_OMAP2PLUS
195 #define CONFIG_TWL4030_USB
196 
197 /*
198  * Fastboot
199  */
200 
201 #define CONFIG_USB_FUNCTION_FASTBOOT
202 
203 #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
204 #define CONFIG_FASTBOOT_BUF_SIZE	0x2000000
205 
206 #define CONFIG_FASTBOOT_FLASH
207 #define CONFIG_FASTBOOT_FLASH_MMC_DEV	0
208 
209 #define CONFIG_CMD_FASTBOOT
210 
211 /*
212  * Environment
213  */
214 
215 #define CONFIG_ENV_SIZE		(128 * 1024)
216 #define CONFIG_ENV_IS_NOWHERE
217 
218 #define CONFIG_ENV_OVERWRITE
219 
220 #define CONFIG_EXTRA_ENV_SETTINGS \
221 	"kernel_addr_r=0x82000000\0" \
222 	"loadaddr=0x82000000\0" \
223 	"fdt_addr_r=0x88000000\0" \
224 	"fdtaddr=0x88000000\0" \
225 	"ramdisk_addr_r=0x88080000\0" \
226 	"pxefile_addr_r=0x80100000\0" \
227 	"scriptaddr=0x80000000\0" \
228 	"bootm_size=0x10000000\0" \
229 	"boot_mmc_dev=0\0" \
230 	"kernel_mmc_part=3\0" \
231 	"recovery_mmc_part=4\0" \
232 	"fdtfile=omap3-sniper.dtb\0" \
233 	"bootfile=/boot/extlinux/extlinux.conf\0" \
234 	"bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
235 
236 /*
237  * ATAGs
238  */
239 
240 #define CONFIG_SETUP_MEMORY_TAGS
241 #define CONFIG_CMDLINE_TAG
242 #define CONFIG_INITRD_TAG
243 #define CONFIG_REVISION_TAG
244 #define CONFIG_SERIAL_TAG
245 
246 /*
247  * Boot
248  */
249 
250 #define CONFIG_SYS_LOAD_ADDR	0x82000000
251 
252 #define CONFIG_ANDROID_BOOT_IMAGE
253 
254 #define CONFIG_BOOTCOMMAND \
255 	"setenv boot_mmc_part ${kernel_mmc_part}; " \
256 	"if test reboot-${reboot-mode} = reboot-r; then " \
257 	"echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
258 	"if test reboot-${reboot-mode} = reboot-b; then " \
259 	"echo fastboot; fastboot 0; fi; " \
260 	"part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
261 	"part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
262 	"mmc dev ${boot_mmc_dev}; " \
263 	"mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
264 	"bootm ${kernel_addr_r};"
265 
266 /*
267  * Defaults
268  */
269 
270 #include <config_defaults.h>
271 #include <config_distro_defaults.h>
272 
273 #endif
274