1 /* 2 * Bluewater Systems Snapper 9260 and 9G20 modules 3 * 4 * (C) Copyright 2011 Bluewater Systems 5 * Author: Andre Renaud <andre@bluewatersys.com> 6 * Author: Ryan Mallon <ryan@bluewatersys.com> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* SoC type is defined in boards.cfg */ 15 #include <asm/hardware.h> 16 #include <linux/sizes.h> 17 18 #define CONFIG_SYS_TEXT_BASE 0x21f00000 19 20 /* ARM asynchronous clock */ 21 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ 22 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 23 24 /* CPU */ 25 #define CONFIG_ARCH_CPU_INIT 26 27 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 28 #define CONFIG_SETUP_MEMORY_TAGS 29 #define CONFIG_INITRD_TAG 30 #define CONFIG_SKIP_LOWLEVEL_INIT 31 32 /* SDRAM */ 33 #define CONFIG_NR_DRAM_BANKS 1 34 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 35 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */ 36 #define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \ 37 GENERATED_GBL_DATA_SIZE) 38 39 /* Mem test settings */ 40 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 41 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (1024 * 1024)) 42 43 /* NAND Flash */ 44 #define CONFIG_NAND_ATMEL 45 #define CONFIG_SYS_MAX_NAND_DEVICE 1 46 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 47 #define CONFIG_SYS_NAND_DBW_8 48 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */ 49 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */ 50 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 51 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 52 53 /* Ethernet */ 54 #define CONFIG_MACB 55 #define CONFIG_RMII 56 #define CONFIG_NET_RETRY_COUNT 20 57 #define CONFIG_RESET_PHY_R 58 #define CONFIG_AT91_WANTS_COMMON_PHY 59 #define CONFIG_TFTP_PORT 60 #define CONFIG_TFTP_TSIZE 61 62 /* USB */ 63 #define CONFIG_USB_ATMEL 64 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 65 #define CONFIG_USB_OHCI_NEW 66 #define CONFIG_SYS_USB_OHCI_CPU_INIT 67 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE 68 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 69 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 70 71 /* GPIOs and IO expander */ 72 #define CONFIG_ATMEL_LEGACY 73 #define CONFIG_AT91_GPIO 74 #define CONFIG_AT91_GPIO_PULLUP 1 75 #define CONFIG_PCA953X 76 #define CONFIG_SYS_I2C_PCA953X_ADDR 0x28 77 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} } 78 79 /* UARTs/Serial console */ 80 #define CONFIG_ATMEL_USART 81 #ifndef CONFIG_DM_SERIAL 82 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 83 #define CONFIG_USART_ID ATMEL_ID_SYS 84 #endif 85 86 /* I2C - Bit-bashed */ 87 #define CONFIG_SYS_I2C 88 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 89 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 90 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F 91 #define CONFIG_SOFT_I2C_READ_REPEATED_START 92 #define I2C_INIT do { \ 93 at91_set_gpio_output(AT91_PIN_PA23, 1); \ 94 at91_set_gpio_output(AT91_PIN_PA24, 1); \ 95 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ 96 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ 97 } while (0) 98 #define I2C_SOFT_DECLARATIONS 99 #define I2C_ACTIVE 100 #define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PA23, 1); 101 #define I2C_READ at91_get_gpio_value(AT91_PIN_PA23); 102 #define I2C_SDA(bit) do { \ 103 if (bit) { \ 104 at91_set_gpio_input(AT91_PIN_PA23, 1); \ 105 } else { \ 106 at91_set_gpio_output(AT91_PIN_PA23, 1); \ 107 at91_set_gpio_value(AT91_PIN_PA23, bit); \ 108 } \ 109 } while (0) 110 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) 111 #define I2C_DELAY udelay(2) 112 113 /* Boot options */ 114 #define CONFIG_SYS_LOAD_ADDR 0x23000000 115 116 #define CONFIG_BOOTP_BOOTFILESIZE 117 #define CONFIG_BOOTP_BOOTPATH 118 #define CONFIG_BOOTP_GATEWAY 119 #define CONFIG_BOOTP_HOSTNAME 120 121 /* Environment settings */ 122 #define CONFIG_ENV_IS_IN_NAND 123 #define CONFIG_ENV_OFFSET (512 << 10) 124 #define CONFIG_ENV_SIZE (256 << 10) 125 #define CONFIG_ENV_OVERWRITE 126 #define CONFIG_BOOTARGS "console=ttyS0,115200 ip=any" 127 128 /* Console settings */ 129 #define CONFIG_SYS_CBSIZE 256 130 #define CONFIG_SYS_MAXARGS 16 131 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 132 sizeof(CONFIG_SYS_PROMPT) + 16) 133 #define CONFIG_SYS_LONGHELP 134 #define CONFIG_CMDLINE_EDITING 135 #define CONFIG_AUTO_COMPLETE 136 137 /* U-Boot memory settings */ 138 #define CONFIG_SYS_MALLOC_LEN (1 << 20) 139 140 /* Command line configuration */ 141 #define CONFIG_CMD_NAND 142 #define CONFIG_CMD_PCA953X 143 #define CONFIG_CMD_PCA953X_INFO 144 145 #endif /* __CONFIG_H */ 146