1 /* 2 * (C) Copyright 2009 Samsung Electronics 3 * Minkyu Kang <mk7.kang@samsung.com> 4 * HeungJun Kim <riverful.kim@samsung.com> 5 * Inki Dae <inki.dae@samsung.com> 6 * 7 * Configuation settings for the SAMSUNG SMDKC100 board. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 /* 16 * High Level Configuration Options 17 * (easy to change) 18 */ 19 #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ 20 #define CONFIG_S5P 1 /* which is in a S5P Family */ 21 #define CONFIG_S5PC100 1 /* which is in a S5PC100 */ 22 #define CONFIG_SMDKC100 1 /* working with SMDKC100 */ 23 24 #include <asm/arch/cpu.h> /* get chip and board defs */ 25 26 #define CONFIG_ARCH_CPU_INIT 27 28 /* input clock of PLL: SMDKC100 has 12MHz input clock */ 29 #define CONFIG_SYS_CLK_FREQ 12000000 30 31 /* DRAM Base */ 32 #define CONFIG_SYS_SDRAM_BASE 0x30000000 33 34 /* Text Base */ 35 #define CONFIG_SYS_TEXT_BASE 0x34800000 36 37 #define CONFIG_SETUP_MEMORY_TAGS 38 #define CONFIG_CMDLINE_TAG 39 #define CONFIG_INITRD_TAG 40 #define CONFIG_CMDLINE_EDITING 41 42 /* 43 * Size of malloc() pool 44 * 1MB = 0x100000, 0x100000 = 1024 * 1024 45 */ 46 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) 47 48 /* 49 * select serial console configuration 50 */ 51 #define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */ 52 53 /* PWM */ 54 #define CONFIG_PWM 1 55 56 /* allow to overwrite serial and ethaddr */ 57 #define CONFIG_ENV_OVERWRITE 58 59 #define CONFIG_MTD_DEVICE 60 #define CONFIG_MTD_PARTITIONS 61 62 #define MTDIDS_DEFAULT "onenand0=s3c-onenand" 63 #define MTDPARTS_DEFAULT "mtdparts=s3c-onenand:256k(bootloader)"\ 64 ",128k@0x40000(params)"\ 65 ",3m@0x60000(kernel)"\ 66 ",16m@0x360000(test)"\ 67 ",-(UBI)" 68 69 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT 70 71 #define CONFIG_BOOTCOMMAND "run ubifsboot" 72 73 #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ 74 " console=ttySAC0,115200n8" \ 75 " mem=128M" 76 77 #define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \ 78 " mem=128M " \ 79 " " MTDPARTS_DEFAULT 80 81 #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ 82 " onenand write 0x32008000 0x0 0x40000\0" 83 84 #define CONFIG_ENV_OVERWRITE 85 #define CONFIG_EXTRA_ENV_SETTINGS \ 86 CONFIG_UPDATEB \ 87 "updatek=" \ 88 "onenand erase 0x60000 0x300000;" \ 89 "onenand write 0x31008000 0x60000 0x300000\0" \ 90 "updateu=" \ 91 "onenand erase block 147-4095;" \ 92 "onenand write 0x32000000 0x1260000 0x8C0000\0" \ 93 "bootk=" \ 94 "onenand read 0x30007FC0 0x60000 0x300000;" \ 95 "bootm 0x30007FC0\0" \ 96 "flashboot=" \ 97 "set bootargs root=/dev/mtdblock${bootblock} " \ 98 "rootfstype=${rootfstype} " \ 99 "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \ 100 "run bootk\0" \ 101 "ubifsboot=" \ 102 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ 103 " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ 104 "run bootk\0" \ 105 "boottrace=setenv opts initcall_debug; run bootcmd\0" \ 106 "android=" \ 107 "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \ 108 "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \ 109 "run bootk\0" \ 110 "nfsboot=" \ 111 "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \ 112 "nfsroot=${nfsroot},nolock " \ 113 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 114 "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \ 115 "run bootk\0" \ 116 "ramboot=" \ 117 "set bootargs " CONFIG_RAMDISK_BOOT \ 118 " initrd=0x33000000,8M ramdisk=8192\0" \ 119 "rootfstype=cramfs\0" \ 120 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 121 "meminfo=mem=128M\0" \ 122 "nfsroot=/nfsroot/arm\0" \ 123 "bootblock=5\0" \ 124 "ubiblock=4\0" \ 125 "ubi=enabled" 126 127 /* 128 * Miscellaneous configurable options 129 */ 130 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 131 #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ 132 /* memtest works on */ 133 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 134 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000) 135 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 136 137 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ 138 #define CONFIG_NR_DRAM_BANKS 1 139 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ 140 #define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */ 141 142 #define CONFIG_SYS_MONITOR_BASE 0x00000000 143 144 /*----------------------------------------------------------------------- 145 * FLASH and environment organization 146 */ 147 148 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ 149 150 #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) 151 #define CONFIG_ENABLE_MMU 152 #endif 153 154 #ifdef CONFIG_ENABLE_MMU 155 #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 156 #else 157 #define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE 158 #endif 159 160 /*----------------------------------------------------------------------- 161 * Boot configuration 162 */ 163 #define CONFIG_ENV_SIZE (128 << 10) /* 128KiB, 0x20000 */ 164 #define CONFIG_ENV_ADDR (256 << 10) /* 256KiB, 0x40000 */ 165 #define CONFIG_ENV_OFFSET (256 << 10) /* 256KiB, 0x40000 */ 166 167 #define CONFIG_USE_ONENAND_BOARD_INIT 168 #define CONFIG_SAMSUNG_ONENAND 1 169 #define CONFIG_SYS_ONENAND_BASE 0xE7100000 170 171 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) 172 173 /* 174 * Ethernet Contoller driver 175 */ 176 #ifdef CONFIG_CMD_NET 177 #define CONFIG_SMC911X 1 /* we have a SMC9115 on-board */ 178 #define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode */ 179 #define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base */ 180 #define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ 181 #endif /* CONFIG_CMD_NET */ 182 183 #endif /* __CONFIG_H */ 184