1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2009 Samsung Electronics 4 * Minkyu Kang <mk7.kang@samsung.com> 5 * HeungJun Kim <riverful.kim@samsung.com> 6 * Inki Dae <inki.dae@samsung.com> 7 * 8 * Configuation settings for the SAMSUNG SMDKC100 board. 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * High Level Configuration Options 16 * (easy to change) 17 */ 18 #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ 19 #define CONFIG_S5P 1 /* which is in a S5P Family */ 20 #define CONFIG_S5PC100 1 /* which is in a S5PC100 */ 21 22 #include <asm/arch/cpu.h> /* get chip and board defs */ 23 24 #define CONFIG_ARCH_CPU_INIT 25 26 /* input clock of PLL: SMDKC100 has 12MHz input clock */ 27 #define CONFIG_SYS_CLK_FREQ 12000000 28 29 /* DRAM Base */ 30 #define CONFIG_SYS_SDRAM_BASE 0x30000000 31 32 /* Text Base */ 33 34 #define CONFIG_SETUP_MEMORY_TAGS 35 #define CONFIG_CMDLINE_TAG 36 #define CONFIG_INITRD_TAG 37 38 /* 39 * Size of malloc() pool 40 * 1MB = 0x100000, 0x100000 = 1024 * 1024 41 */ 42 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) 43 44 /* 45 * select serial console configuration 46 */ 47 48 /* PWM */ 49 #define CONFIG_PWM 1 50 51 /* allow to overwrite serial and ethaddr */ 52 #define CONFIG_ENV_OVERWRITE 53 54 #define CONFIG_BOOTCOMMAND "run ubifsboot" 55 56 #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ 57 " console=ttySAC0,115200n8" \ 58 " mem=128M" 59 60 #define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \ 61 " mem=128M " \ 62 " " CONFIG_MTDPARTS_DEFAULT 63 64 #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ 65 " onenand write 0x32008000 0x0 0x40000\0" 66 67 #define CONFIG_ENV_OVERWRITE 68 #define CONFIG_EXTRA_ENV_SETTINGS \ 69 CONFIG_UPDATEB \ 70 "updatek=" \ 71 "onenand erase 0x60000 0x300000;" \ 72 "onenand write 0x31008000 0x60000 0x300000\0" \ 73 "updateu=" \ 74 "onenand erase block 147-4095;" \ 75 "onenand write 0x32000000 0x1260000 0x8C0000\0" \ 76 "bootk=" \ 77 "onenand read 0x30007FC0 0x60000 0x300000;" \ 78 "bootm 0x30007FC0\0" \ 79 "flashboot=" \ 80 "set bootargs root=/dev/mtdblock${bootblock} " \ 81 "rootfstype=${rootfstype} " \ 82 "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \ 83 "run bootk\0" \ 84 "ubifsboot=" \ 85 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ 86 " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ 87 "run bootk\0" \ 88 "boottrace=setenv opts initcall_debug; run bootcmd\0" \ 89 "android=" \ 90 "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \ 91 "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \ 92 "run bootk\0" \ 93 "nfsboot=" \ 94 "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \ 95 "nfsroot=${nfsroot},nolock " \ 96 "ip=${ipaddr}:${serverip}:${gatewayip}:" \ 97 "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \ 98 "run bootk\0" \ 99 "ramboot=" \ 100 "set bootargs " CONFIG_RAMDISK_BOOT \ 101 " initrd=0x33000000,8M ramdisk=8192\0" \ 102 "rootfstype=cramfs\0" \ 103 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 104 "meminfo=mem=128M\0" \ 105 "nfsroot=/nfsroot/arm\0" \ 106 "bootblock=5\0" \ 107 "ubiblock=4\0" \ 108 "ubi=enabled" 109 110 /* 111 * Miscellaneous configurable options 112 */ 113 #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ 114 /* memtest works on */ 115 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 116 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000) 117 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 118 119 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ 120 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ 121 #define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */ 122 123 #define CONFIG_SYS_MONITOR_BASE 0x00000000 124 125 /*----------------------------------------------------------------------- 126 * FLASH and environment organization 127 */ 128 129 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ 130 131 #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) 132 #define CONFIG_ENABLE_MMU 133 #endif 134 135 #ifdef CONFIG_ENABLE_MMU 136 #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 137 #else 138 #define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE 139 #endif 140 141 /*----------------------------------------------------------------------- 142 * Boot configuration 143 */ 144 #define CONFIG_ENV_SIZE (128 << 10) /* 128KiB, 0x20000 */ 145 #define CONFIG_ENV_ADDR (256 << 10) /* 256KiB, 0x40000 */ 146 #define CONFIG_ENV_OFFSET (256 << 10) /* 256KiB, 0x40000 */ 147 148 #define CONFIG_USE_ONENAND_BOARD_INIT 149 #define CONFIG_SAMSUNG_ONENAND 1 150 #define CONFIG_SYS_ONENAND_BASE 0xE7100000 151 152 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) 153 154 /* 155 * Ethernet Contoller driver 156 */ 157 #ifdef CONFIG_CMD_NET 158 #define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ 159 #endif /* CONFIG_CMD_NET */ 160 161 #endif /* __CONFIG_H */ 162