xref: /openbmc/u-boot/include/configs/silk.h (revision e23b19f4)
1 /*
2  * include/configs/silk.h
3  *     This file is silk board configuration.
4  *
5  * Copyright (C) 2015 Renesas Electronics Corporation
6  * Copyright (C) 2015 Cogent Embedded, Inc.
7  *
8  * SPDX-License-Identifier: GPL-2.0
9  */
10 
11 #ifndef __SILK_H
12 #define __SILK_H
13 
14 #undef DEBUG
15 #define CONFIG_ARCH_RMOBILE_BOARD_STRING "Silk"
16 
17 #include "rcar-gen2-common.h"
18 
19 #if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
20 #define CONFIG_SYS_TEXT_BASE	0x70000000
21 #else
22 #define CONFIG_SYS_TEXT_BASE	0xE6304000
23 #endif
24 
25 #if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
26 #define CONFIG_SYS_INIT_SP_ADDR		0x7003FFFC
27 #else
28 #define CONFIG_SYS_INIT_SP_ADDR		0xE633FFFC
29 #endif
30 #define STACK_AREA_SIZE			0xC000
31 #define LOW_LEVEL_MERAM_STACK \
32 		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
33 
34 /* MEMORY */
35 #define RCAR_GEN2_SDRAM_BASE		0x40000000
36 #define RCAR_GEN2_SDRAM_SIZE		(1024u * 1024 * 1024)
37 #define RCAR_GEN2_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
38 
39 /* SCIF */
40 
41 /* FLASH */
42 #define CONFIG_SPI
43 #define CONFIG_SH_QSPI
44 #define CONFIG_SPI_FLASH_QUAD
45 
46 /* SH Ether */
47 #define CONFIG_SH_ETHER_USE_PORT	0
48 #define CONFIG_SH_ETHER_PHY_ADDR	0x1
49 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
50 #define CONFIG_SH_ETHER_CACHE_WRITEBACK
51 #define CONFIG_SH_ETHER_CACHE_INVALIDATE
52 #define CONFIG_SH_ETHER_ALIGNE_SIZE	64
53 #define CONFIG_BITBANGMII
54 #define CONFIG_BITBANGMII_MULTI
55 
56 /* Board Clock */
57 #define RMOBILE_XTAL_CLK	20000000u
58 #define CONFIG_SYS_CLK_FREQ	RMOBILE_XTAL_CLK
59 #define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
60 #define CONFIG_PLL1_CLK_FREQ	(CONFIG_SYS_CLK_FREQ * 156 / 2)
61 #define CONFIG_P_CLK_FREQ	(CONFIG_PLL1_CLK_FREQ / 24)
62 
63 #define CONFIG_SYS_TMU_CLK_DIV  4
64 
65 /* i2c */
66 #define CONFIG_SYS_I2C
67 #define CONFIG_SYS_I2C_SH
68 #define CONFIG_SYS_I2C_SLAVE		0x7F
69 #define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	3
70 #define CONFIG_SYS_I2C_SH_SPEED0	400000
71 #define CONFIG_SYS_I2C_SH_SPEED1	400000
72 #define CONFIG_SYS_I2C_SH_SPEED2	400000
73 #define CONFIG_SH_I2C_DATA_HIGH		4
74 #define CONFIG_SH_I2C_DATA_LOW		5
75 #define CONFIG_SH_I2C_CLOCK		10000000
76 
77 #define CONFIG_SYS_I2C_POWERIC_ADDR	0x58 /* da9063 */
78 
79 /* USB */
80 #define CONFIG_USB_EHCI_RMOBILE
81 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
82 
83 /* MMCIF */
84 #define CONFIG_SH_MMCIF
85 #define CONFIG_SH_MMCIF_ADDR	0xee200000
86 #define CONFIG_SH_MMCIF_CLK	48000000
87 
88 /* SDHI */
89 #define CONFIG_SH_SDHI_FREQ	97500000
90 
91 /* Module stop status bits */
92 /* INTC-RT */
93 #define CONFIG_SMSTP0_ENA	0x00400000
94 /* MSIF */
95 #define CONFIG_SMSTP2_ENA	0x00002000
96 /* INTC-SYS, IRQC */
97 #define CONFIG_SMSTP4_ENA	0x00000180
98 /* SCIF2 */
99 #define CONFIG_SMSTP7_ENA	0x00080000
100 
101 #endif /* __SILK_H */
102