1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #define CONFIG_AM33XX 18 19 #include <asm/arch/omap.h> 20 21 #define CONFIG_DMA_COHERENT 22 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 23 24 #define CONFIG_ENV_SIZE (0x2000) 25 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 26 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 27 #ifdef CONFIG_SIEMENS_MACH_TYPE 28 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 29 #endif 30 31 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 32 #define CONFIG_SETUP_MEMORY_TAGS 33 #define CONFIG_INITRD_TAG 34 35 /* commands to include */ 36 37 #define CONFIG_ENV_VARS_UBOOT_CONFIG 38 #ifndef CONFIG_SPL_BUILD 39 #define CONFIG_ROOTPATH "/opt/eldk" 40 #endif 41 42 #define CONFIG_ENV_OVERWRITE 1 43 #define CONFIG_ENV_IS_NOWHERE 44 45 #define CONFIG_SYS_LONGHELP 46 #define CONFIG_CMDLINE_EDITING 47 #define CONFIG_AUTO_COMPLETE 48 #define CONFIG_SYS_AUTOLOAD "yes" 49 50 /* Clock Defines */ 51 #define V_OSCK 24000000 /* Clock output from T2 */ 52 #define V_SCLK (V_OSCK) 53 54 /* We set the max number of command args high to avoid HUSH bugs. */ 55 #define CONFIG_SYS_MAXARGS 32 56 57 /* Console I/O Buffer Size */ 58 #define CONFIG_SYS_CBSIZE 1024 59 60 /* Print Buffer Size */ 61 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 62 + sizeof(CONFIG_SYS_PROMPT) + 16) 63 64 /* Boot Argument Buffer Size */ 65 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 66 67 /* 68 * memtest works on 8 MB in DRAM after skipping 32MB from 69 * start addr of ram disk 70 */ 71 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 72 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 73 + (8 * 1024 * 1024)) 74 75 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 76 77 #define CONFIG_SPI 78 #define CONFIG_OMAP3_SPI 79 #define CONFIG_MTD_DEVICE 80 #define CONFIG_SF_DEFAULT_SPEED (75000000) 81 82 /* Physical Memory Map */ 83 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 84 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 85 86 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 87 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 88 GENERATED_GBL_DATA_SIZE) 89 /* Platform/Board specific defs */ 90 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 91 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 92 93 /* NS16550 Configuration */ 94 #ifdef CONFIG_SPL_BUILD 95 #define CONFIG_SYS_NS16550_SERIAL 96 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 97 #endif 98 #define CONFIG_SYS_NS16550_CLK (48000000) 99 #define CONFIG_SYS_NS16550_COM1 0x44e09000 100 #define CONFIG_SYS_NS16550_COM4 0x481a6000 101 102 #define CONFIG_SERIAL1 1 103 #define CONFIG_CONS_INDEX 1 104 105 /* I2C Configuration */ 106 #define CONFIG_I2C 107 #define CONFIG_SYS_I2C 108 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 109 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 110 #define CONFIG_SYS_I2C_OMAP24XX 111 112 /* Defines for SPL */ 113 #define CONFIG_SPL_FRAMEWORK 114 #define CONFIG_SPL_TEXT_BASE 0x402F0400 115 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 116 CONFIG_SPL_TEXT_BASE) 117 118 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 119 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 120 121 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 122 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 123 #define CONFIG_FS_FAT 124 125 #define CONFIG_SPL_SPI_LOAD 126 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 127 128 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 129 130 #define CONFIG_SPL_BOARD_INIT 131 #define CONFIG_SPL_NAND_AM33XX_BCH 132 #define CONFIG_SPL_NAND_BASE 133 #define CONFIG_SPL_NAND_DRIVERS 134 #define CONFIG_SPL_NAND_ECC 135 #define CONFIG_SYS_NAND_ONFI_DETECTION 136 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 137 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 138 CONFIG_SYS_NAND_PAGE_SIZE) 139 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 140 #define CONFIG_SYS_NAND_OOBSIZE 64 141 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 142 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 143 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 144 10, 11, 12, 13, 14, 15, 16, 17, \ 145 18, 19, 20, 21, 22, 23, 24, 25, \ 146 26, 27, 28, 29, 30, 31, 32, 33, \ 147 34, 35, 36, 37, 38, 39, 40, 41, \ 148 42, 43, 44, 45, 46, 47, 48, 49, \ 149 50, 51, 52, 53, 54, 55, 56, 57, } 150 151 #define CONFIG_SYS_NAND_ECCSIZE 512 152 #define CONFIG_SYS_NAND_ECCBYTES 14 153 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 154 155 #define CONFIG_SYS_NAND_ECCSTEPS 4 156 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 157 CONFIG_SYS_NAND_ECCSTEPS) 158 159 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 160 161 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 162 163 /* 164 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 165 * 64 bytes before this address should be set aside for u-boot.img's 166 * header. That is 0x800FFFC0--0x80100000 should not be used for any 167 * other needs. 168 */ 169 #define CONFIG_SYS_TEXT_BASE 0x80100000 170 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 171 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 172 173 /* 174 * Since SPL did pll and ddr initialization for us, 175 * we don't need to do it twice. 176 */ 177 #ifndef CONFIG_SPL_BUILD 178 #define CONFIG_SKIP_LOWLEVEL_INIT 179 #endif 180 181 #ifndef CONFIG_SPL_BUILD 182 /* 183 * USB configuration 184 */ 185 #define CONFIG_USB_MUSB_DSPS 186 #define CONFIG_USB_MUSB_PIO_ONLY 187 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 188 #undef CONFIG_USB_GADGET_DUALSPEED 189 190 #define CONFIG_AM335X_USB0 191 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 192 #define CONFIG_AM335X_USB1 193 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 194 195 #ifdef CONFIG_USB_MUSB_GADGET 196 #define CONFIG_USB_ETHER 197 #define CONFIG_USB_ETH_RNDIS 198 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" 199 #endif /* CONFIG_USB_MUSB_GADGET */ 200 201 /* USB DRACO ID as default */ 202 #define CONFIG_USBD_HS 203 204 /* USB Device Firmware Update support */ 205 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 206 #define DFU_MANIFEST_POLL_TIMEOUT 25000 207 208 #endif /* CONFIG_SPL_BUILD */ 209 210 /* 211 * Default to using SPI for environment, etc. We have multiple copies 212 * of SPL as the ROM will check these locations. 213 * 0x0 - 0x20000 : First copy of SPL 214 * 0x20000 - 0x40000 : Second copy of SPL 215 * 0x40000 - 0x60000 : Third copy of SPL 216 * 0x60000 - 0x80000 : Fourth copy of SPL 217 * 0x80000 - 0xDF000 : U-Boot 218 * 0xDF000 - 0xE0000 : U-Boot Environment 219 * 0xE0000 - 0x442000 : Linux Kernel 220 * 0x442000 - 0x800000 : Userland 221 */ 222 #if defined(CONFIG_SPI_BOOT) 223 # undef CONFIG_ENV_IS_NOWHERE 224 # define CONFIG_ENV_IS_IN_SPI_FLASH 225 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 226 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 227 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 228 #endif /* SPI support */ 229 230 #define CONFIG_DRIVER_TI_CPSW 231 #define CONFIG_MII 232 #define CONFIG_PHY_GIGE 233 #define CONFIG_PHYLIB 234 #define CONFIG_BOOTP_DEFAULT 235 #define CONFIG_BOOTP_DNS 236 #define CONFIG_BOOTP_DNS2 237 #define CONFIG_BOOTP_SEND_HOSTNAME 238 #define CONFIG_BOOTP_GATEWAY 239 #define CONFIG_BOOTP_SUBNETMASK 240 #define CONFIG_NET_RETRY_COUNT 10 241 242 #define CONFIG_NAND 243 /* NAND support */ 244 #ifdef CONFIG_NAND 245 #define CONFIG_CMD_NAND 246 247 /* UBI Support */ 248 #ifndef CONFIG_SPL_BUILD 249 #define CONFIG_CMD_MTDPARTS 250 #define CONFIG_MTD_PARTITIONS 251 #define CONFIG_MTD_DEVICE 252 #define CONFIG_RBTREE 253 #define CONFIG_LZO 254 #define CONFIG_CMD_UBIFS 255 #endif 256 257 /* Commen environment */ 258 #define CONFIG_PREBOOT 259 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 260 "setenv bootargs ${bootargs};" \ 261 "mtdparts default;" \ 262 "draco_led 1;" \ 263 "dfu 0 nand 0;" \ 264 "draco_led 0;\0" \ 265 266 #define COMMON_ENV_NAND_BOOT \ 267 "nand_boot=echo Booting from nand; " \ 268 "if test ${upgrade_available} -eq 1; then " \ 269 "if test ${bootcount} -gt ${bootlimit}; " \ 270 "then " \ 271 "setenv upgrade_available 0;" \ 272 "setenv ${partitionset_active} true;" \ 273 "if test -n ${A}; then " \ 274 "setenv partitionset_active B; " \ 275 "env delete A; " \ 276 "fi;" \ 277 "if test -n ${B}; then " \ 278 "setenv partitionset_active A; " \ 279 "env delete B; " \ 280 "fi;" \ 281 "saveenv; " \ 282 "fi;" \ 283 "fi;" \ 284 "echo set ${partitionset_active}...;" \ 285 "run nand_args; " 286 287 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 288 "flash_self_test=setenv testargs test; " \ 289 "run nand_boot\0" \ 290 "dfu_start=echo Preparing for dfu mode ...; " \ 291 "run dfu_args; \0" 292 293 #define COMMON_ENV_SETTINGS \ 294 "verify=no \0" \ 295 "project_dir=targetdir\0" \ 296 "upgrade_available=0\0" \ 297 "altbootcmd=run bootcmd\0" \ 298 "bootlimit=3\0" \ 299 "partitionset_active=A\0" \ 300 "loadaddr=0x82000000\0" \ 301 "kloadaddr=0x81000000\0" \ 302 "script_addr=0x81900000\0" \ 303 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 304 "nfsopts=nolock rw\0" \ 305 "ip_method=none\0" \ 306 "bootenv=uEnv.txt\0" \ 307 "bootargs_defaults=setenv bootargs " \ 308 "console=${console} " \ 309 "${testargs} " \ 310 "${optargs}\0" \ 311 "siemens_help=echo; "\ 312 "echo Type 'run flash_self' to use kernel and root " \ 313 "filesystem on memory; echo Type 'run flash_self_test' to " \ 314 "use kernel and root filesystem on memory, boot in test " \ 315 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 316 "from memory and root filesystem over NFS; echo Type " \ 317 "'run net_nfs' to get Kernel over TFTP and mount root " \ 318 "filesystem over NFS; " \ 319 "echo Set partitionset_active variable to 'A' " \ 320 "or 'B' to select kernel and rootfs partition; " \ 321 "echo" \ 322 "\0" 323 324 /* 325 * Variant 1 partition layout 326 * chip-size = 256MiB 327 *| name | size | address area | 328 *------------------------------------------------------- 329 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 330 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 331 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 332 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 333 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 334 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 335 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 336 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 337 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 338 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 339 *------------------------------------------------------- 340 */ 341 #define MTDIDS_NAME_STR "omap2-nand.0" 342 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR 343 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ 344 "128k(spl)," \ 345 "128k(spl.backup1)," \ 346 "128k(spl.backup2)," \ 347 "128k(spl.backup3)," \ 348 "1920k(u-boot)," \ 349 "128k(uboot.env)," \ 350 "5120k(kernel_a)," \ 351 "5120k(kernel_b)," \ 352 "8192k(mtdoops)," \ 353 "-(rootfs)" 354 355 #define DFU_ALT_INFO_NAND_V1 \ 356 "spl part 0 1;" \ 357 "spl.backup1 part 0 2;" \ 358 "spl.backup2 part 0 3;" \ 359 "spl.backup3 part 0 4;" \ 360 "u-boot part 0 5;" \ 361 "u-boot.env part 0 6;" \ 362 "kernel_a part 0 7;" \ 363 "kernel_b part 0 8;" \ 364 "rootfs partubi 0 10" 365 366 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 367 "nand_active_ubi_vol=rootfs_a\0" \ 368 "nand_active_ubi_vol_A=rootfs_a\0" \ 369 "nand_active_ubi_vol_B=rootfs_b\0" \ 370 "nand_root_fs_type=ubifs rootwait=1\0" \ 371 "nand_src_addr=0x280000\0" \ 372 "nand_src_addr_A=0x280000\0" \ 373 "nand_src_addr_B=0x780000\0" \ 374 "nand_args=run bootargs_defaults;" \ 375 "mtdparts default;" \ 376 "setenv ${partitionset_active} true;" \ 377 "if test -n ${A}; then " \ 378 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 379 "setenv nand_src_addr ${nand_src_addr_A};" \ 380 "fi;" \ 381 "if test -n ${B}; then " \ 382 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 383 "setenv nand_src_addr ${nand_src_addr_B};" \ 384 "fi;" \ 385 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 386 "ubi.mtd=9,${ubi_off};" \ 387 "setenv bootargs ${bootargs} " \ 388 "root=${nand_root} noinitrd ${mtdparts} " \ 389 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 390 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 391 "=mtdoops\0" \ 392 COMMON_ENV_DFU_ARGS \ 393 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 394 COMMON_ENV_NAND_BOOT \ 395 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 396 "${nand_img_size}; bootm ${kloadaddr}\0" \ 397 COMMON_ENV_NAND_CMDS 398 399 #define CONFIG_ENV_SETTINGS_V1 \ 400 COMMON_ENV_SETTINGS \ 401 "net_args=run bootargs_defaults;" \ 402 "mtdparts default;" \ 403 "setenv bootfile ${project_dir}/kernel/uImage;" \ 404 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 405 "setenv bootargs ${bootargs} " \ 406 "root=/dev/nfs ${mtdparts} " \ 407 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 408 "ip=${ipaddr}:${serverip}:" \ 409 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 410 "net_nfs=echo Booting from network ...; " \ 411 "run net_args; " \ 412 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 413 "bootm ${kloadaddr}\0" 414 415 /* 416 * Variant 2 partition layout 417 * chip-size = 256MiB or 512 MiB 418 *| name | size | address area | 419 *------------------------------------------------------- 420 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 421 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 422 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 423 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 424 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 425 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 426 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 427 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 428 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 429 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 430 *------------------------------------------------------- 431 */ 432 433 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ 434 "128k(spl)," \ 435 "128k(spl.backup1)," \ 436 "128k(spl.backup2)," \ 437 "128k(spl.backup3)," \ 438 "1920k(u-boot)," \ 439 "512k(u-boot.env0)," \ 440 "512k(u-boot.env1)," \ 441 "512k(mtdoops)," \ 442 "-(rootfs)" 443 444 #define DFU_ALT_INFO_NAND_V2 \ 445 "spl part 0 1;" \ 446 "spl.backup1 part 0 2;" \ 447 "spl.backup2 part 0 3;" \ 448 "spl.backup3 part 0 4;" \ 449 "u-boot part 0 5;" \ 450 "u-boot.env0 part 0 6;" \ 451 "u-boot.env1 part 0 7;" \ 452 "rootfs partubi 0 9" \ 453 454 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 455 "nand_active_ubi_vol=rootfs_a\0" \ 456 "rootfs_name=rootfs\0" \ 457 "kernel_name=uImage\0"\ 458 "nand_root_fs_type=ubifs rootwait=1\0" \ 459 "nand_args=run bootargs_defaults;" \ 460 "mtdparts default;" \ 461 "setenv ${partitionset_active} true;" \ 462 "if test -n ${A}; then " \ 463 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 464 "fi;" \ 465 "if test -n ${B}; then " \ 466 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 467 "fi;" \ 468 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 469 "ubi.mtd=rootfs,2048;" \ 470 "setenv bootargs ${bootargs} " \ 471 "root=${nand_root} noinitrd ${mtdparts} " \ 472 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 473 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 474 "=mtdoops\0" \ 475 COMMON_ENV_DFU_ARGS \ 476 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 477 COMMON_ENV_NAND_BOOT \ 478 "ubi part rootfs ${ubi_off};" \ 479 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 480 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 481 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 482 "bootm ${kloadaddr} - ${loadaddr}\0" \ 483 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 484 "bootm ${kloadaddr} - ${loadaddr}\0" \ 485 COMMON_ENV_NAND_CMDS 486 487 #define CONFIG_ENV_SETTINGS_V2 \ 488 COMMON_ENV_SETTINGS \ 489 "net_args=run bootargs_defaults;" \ 490 "mtdparts default;" \ 491 "setenv bootfile ${project_dir}/kernel/uImage;" \ 492 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 493 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 494 "setenv bootargs ${bootargs} " \ 495 "root=/dev/nfs ${mtdparts} " \ 496 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 497 "ip=${ipaddr}:${serverip}:" \ 498 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 499 "net_nfs=echo Booting from network ...; " \ 500 "run net_args; " \ 501 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 502 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 503 "bootm ${kloadaddr} - ${loadaddr}\0" 504 505 /* 506 * Variant 3 partition layout 507 * chip-size = 512MiB 508 *| name | size | address area | 509 *------------------------------------------------------- 510 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 511 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 512 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 513 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 514 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 515 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 516 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 517 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 518 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 519 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 520 *------------------------------------------------------- 521 */ 522 523 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ 524 "128k(spl)," \ 525 "128k(spl.backup1)," \ 526 "128k(spl.backup2)," \ 527 "128k(spl.backup3)," \ 528 "1920k(u-boot)," \ 529 "512k(u-boot.env0)," \ 530 "512k(u-boot.env1)," \ 531 "300m(rootfs)," \ 532 "512k(mtdoops)," \ 533 "-(configuration)" 534 535 #define CONFIG_NAND_OMAP_GPMC 536 #define CONFIG_NAND_OMAP_ELM 537 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 538 /* to access nand at */ 539 /* CS0 */ 540 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 541 devices */ 542 #if !defined(CONFIG_SPI_BOOT) 543 #undef CONFIG_ENV_IS_NOWHERE 544 #define CONFIG_ENV_IS_IN_NAND 545 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 546 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 547 #endif 548 #endif 549 550 /* Reboot after 60 sec if bootcmd fails */ 551 #define CONFIG_RESET_TO_RETRY 552 #define CONFIG_BOOT_RETRY_TIME 60 553 554 #define CONFIG_BOOTCOUNT_LIMIT 555 #define CONFIG_BOOTCOUNT_ENV 556 557 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 558