1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #define CONFIG_AM33XX 18 #define CONFIG_OMAP 19 #define CONFIG_OMAP_COMMON 20 21 #include <asm/arch/omap.h> 22 23 #define CONFIG_DMA_COHERENT 24 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 25 26 #define CONFIG_ENV_SIZE (0x2000) 27 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 28 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 29 #define CONFIG_BOARD_LATE_INIT 30 #define CONFIG_SYS_NO_FLASH 31 #ifdef CONFIG_SIEMENS_MACH_TYPE 32 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 33 #endif 34 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_SETUP_MEMORY_TAGS 37 #define CONFIG_INITRD_TAG 38 39 /* commands to include */ 40 41 #define CONFIG_ENV_VARS_UBOOT_CONFIG 42 #ifndef CONFIG_SPL_BUILD 43 #define CONFIG_ROOTPATH "/opt/eldk" 44 #endif 45 46 #define CONFIG_ENV_OVERWRITE 1 47 #define CONFIG_ENV_IS_NOWHERE 48 49 #define CONFIG_SYS_LONGHELP 50 #define CONFIG_CMDLINE_EDITING 51 #define CONFIG_AUTO_COMPLETE 52 #define CONFIG_SYS_AUTOLOAD "yes" 53 54 /* Clock Defines */ 55 #define V_OSCK 24000000 /* Clock output from T2 */ 56 #define V_SCLK (V_OSCK) 57 58 /* We set the max number of command args high to avoid HUSH bugs. */ 59 #define CONFIG_SYS_MAXARGS 32 60 61 /* Console I/O Buffer Size */ 62 #define CONFIG_SYS_CBSIZE 1024 63 64 /* Print Buffer Size */ 65 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 66 + sizeof(CONFIG_SYS_PROMPT) + 16) 67 68 /* Boot Argument Buffer Size */ 69 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 70 71 /* 72 * memtest works on 8 MB in DRAM after skipping 32MB from 73 * start addr of ram disk 74 */ 75 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 76 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 77 + (8 * 1024 * 1024)) 78 79 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 80 81 #define CONFIG_MMC 82 #define CONFIG_GENERIC_MMC 83 #define CONFIG_OMAP_HSMMC 84 #define CONFIG_DOS_PARTITION 85 86 #define CONFIG_SPI 87 #define CONFIG_OMAP3_SPI 88 #define CONFIG_MTD_DEVICE 89 #define CONFIG_SF_DEFAULT_SPEED (75000000) 90 91 /* Physical Memory Map */ 92 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 93 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 94 95 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 96 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 97 GENERATED_GBL_DATA_SIZE) 98 /* Platform/Board specific defs */ 99 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 100 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 101 102 /* NS16550 Configuration */ 103 #ifdef CONFIG_SPL_BUILD 104 #define CONFIG_SYS_NS16550_SERIAL 105 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 106 #endif 107 #define CONFIG_SYS_NS16550_CLK (48000000) 108 #define CONFIG_SYS_NS16550_COM1 0x44e09000 109 #define CONFIG_SYS_NS16550_COM4 0x481a6000 110 111 #define CONFIG_BAUDRATE 115200 112 113 #define CONFIG_SYS_CONSOLE_INFO_QUIET 114 #define CONFIG_SERIAL1 1 115 #define CONFIG_CONS_INDEX 1 116 117 /* I2C Configuration */ 118 #define CONFIG_I2C 119 #define CONFIG_SYS_I2C 120 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 121 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 122 #define CONFIG_SYS_I2C_OMAP24XX 123 124 /* Defines for SPL */ 125 #define CONFIG_SPL_FRAMEWORK 126 #define CONFIG_SPL_TEXT_BASE 0x402F0400 127 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 128 CONFIG_SPL_TEXT_BASE) 129 130 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 131 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 132 133 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 134 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 135 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 136 #define CONFIG_FS_FAT 137 138 #define CONFIG_SPL_SPI_LOAD 139 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 140 141 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" 142 143 #define CONFIG_SPL_BOARD_INIT 144 #define CONFIG_SPL_NAND_AM33XX_BCH 145 #define CONFIG_SPL_NAND_BASE 146 #define CONFIG_SPL_NAND_DRIVERS 147 #define CONFIG_SPL_NAND_ECC 148 #define CONFIG_SYS_NAND_ONFI_DETECTION 149 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 150 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 151 CONFIG_SYS_NAND_PAGE_SIZE) 152 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 153 #define CONFIG_SYS_NAND_OOBSIZE 64 154 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 155 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 156 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 157 10, 11, 12, 13, 14, 15, 16, 17, \ 158 18, 19, 20, 21, 22, 23, 24, 25, \ 159 26, 27, 28, 29, 30, 31, 32, 33, \ 160 34, 35, 36, 37, 38, 39, 40, 41, \ 161 42, 43, 44, 45, 46, 47, 48, 49, \ 162 50, 51, 52, 53, 54, 55, 56, 57, } 163 164 #define CONFIG_SYS_NAND_ECCSIZE 512 165 #define CONFIG_SYS_NAND_ECCBYTES 14 166 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 167 168 #define CONFIG_SYS_NAND_ECCSTEPS 4 169 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 170 CONFIG_SYS_NAND_ECCSTEPS) 171 172 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 173 174 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 175 176 /* 177 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 178 * 64 bytes before this address should be set aside for u-boot.img's 179 * header. That is 0x800FFFC0--0x80100000 should not be used for any 180 * other needs. 181 */ 182 #define CONFIG_SYS_TEXT_BASE 0x80100000 183 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 184 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 185 186 /* 187 * Since SPL did pll and ddr initialization for us, 188 * we don't need to do it twice. 189 */ 190 #ifndef CONFIG_SPL_BUILD 191 #define CONFIG_SKIP_LOWLEVEL_INIT 192 #endif 193 194 #ifndef CONFIG_SPL_BUILD 195 /* 196 * USB configuration 197 */ 198 #define CONFIG_USB_MUSB_DSPS 199 #define CONFIG_ARCH_MISC_INIT 200 #define CONFIG_USB_MUSB_PIO_ONLY 201 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 202 #undef CONFIG_USB_GADGET_DUALSPEED 203 204 #define CONFIG_AM335X_USB0 205 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 206 #define CONFIG_AM335X_USB1 207 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 208 209 #ifdef CONFIG_USB_MUSB_GADGET 210 #define CONFIG_USB_ETHER 211 #define CONFIG_USB_ETH_RNDIS 212 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" 213 #endif /* CONFIG_USB_MUSB_GADGET */ 214 215 /* USB DRACO ID as default */ 216 #define CONFIG_USBD_HS 217 218 /* USB Device Firmware Update support */ 219 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 220 #define DFU_MANIFEST_POLL_TIMEOUT 25000 221 222 #endif /* CONFIG_SPL_BUILD */ 223 224 /* 225 * Default to using SPI for environment, etc. We have multiple copies 226 * of SPL as the ROM will check these locations. 227 * 0x0 - 0x20000 : First copy of SPL 228 * 0x20000 - 0x40000 : Second copy of SPL 229 * 0x40000 - 0x60000 : Third copy of SPL 230 * 0x60000 - 0x80000 : Fourth copy of SPL 231 * 0x80000 - 0xDF000 : U-Boot 232 * 0xDF000 - 0xE0000 : U-Boot Environment 233 * 0xE0000 - 0x442000 : Linux Kernel 234 * 0x442000 - 0x800000 : Userland 235 */ 236 #if defined(CONFIG_SPI_BOOT) 237 # undef CONFIG_ENV_IS_NOWHERE 238 # define CONFIG_ENV_IS_IN_SPI_FLASH 239 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 240 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 241 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 242 #endif /* SPI support */ 243 244 /* Unsupported features */ 245 #undef CONFIG_USE_IRQ 246 247 #define CONFIG_DRIVER_TI_CPSW 248 #define CONFIG_MII 249 #define CONFIG_PHY_GIGE 250 #define CONFIG_PHYLIB 251 #define CONFIG_BOOTP_DEFAULT 252 #define CONFIG_BOOTP_DNS 253 #define CONFIG_BOOTP_DNS2 254 #define CONFIG_BOOTP_SEND_HOSTNAME 255 #define CONFIG_BOOTP_GATEWAY 256 #define CONFIG_BOOTP_SUBNETMASK 257 #define CONFIG_NET_RETRY_COUNT 10 258 259 #define CONFIG_NAND 260 /* NAND support */ 261 #ifdef CONFIG_NAND 262 #define CONFIG_CMD_NAND 263 264 /* UBI Support */ 265 #ifndef CONFIG_SPL_BUILD 266 #define CONFIG_CMD_MTDPARTS 267 #define CONFIG_MTD_PARTITIONS 268 #define CONFIG_MTD_DEVICE 269 #define CONFIG_RBTREE 270 #define CONFIG_LZO 271 #define CONFIG_CMD_UBIFS 272 #endif 273 274 /* Commen environment */ 275 #define CONFIG_PREBOOT 276 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 277 "setenv bootargs ${bootargs};" \ 278 "mtdparts default;" \ 279 "draco_led 1;" \ 280 "dfu 0 nand 0;" \ 281 "draco_led 0;\0" \ 282 283 #define COMMON_ENV_NAND_BOOT \ 284 "nand_boot=echo Booting from nand; " \ 285 "if test ${upgrade_available} -eq 1; then " \ 286 "if test ${bootcount} -gt ${bootlimit}; " \ 287 "then " \ 288 "setenv upgrade_available 0;" \ 289 "setenv ${partitionset_active} true;" \ 290 "if test -n ${A}; then " \ 291 "setenv partitionset_active B; " \ 292 "env delete A; " \ 293 "fi;" \ 294 "if test -n ${B}; then " \ 295 "setenv partitionset_active A; " \ 296 "env delete B; " \ 297 "fi;" \ 298 "saveenv; " \ 299 "fi;" \ 300 "fi;" \ 301 "echo set ${partitionset_active}...;" \ 302 "run nand_args; " 303 304 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 305 "flash_self_test=setenv testargs test; " \ 306 "run nand_boot\0" \ 307 "dfu_start=echo Preparing for dfu mode ...; " \ 308 "run dfu_args; \0" 309 310 #define COMMON_ENV_SETTINGS \ 311 "verify=no \0" \ 312 "project_dir=targetdir\0" \ 313 "upgrade_available=0\0" \ 314 "altbootcmd=run bootcmd\0" \ 315 "bootlimit=3\0" \ 316 "partitionset_active=A\0" \ 317 "loadaddr=0x82000000\0" \ 318 "kloadaddr=0x81000000\0" \ 319 "script_addr=0x81900000\0" \ 320 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 321 "nfsopts=nolock rw\0" \ 322 "ip_method=none\0" \ 323 "bootenv=uEnv.txt\0" \ 324 "bootargs_defaults=setenv bootargs " \ 325 "console=${console} " \ 326 "${testargs} " \ 327 "${optargs}\0" \ 328 "siemens_help=echo; "\ 329 "echo Type 'run flash_self' to use kernel and root " \ 330 "filesystem on memory; echo Type 'run flash_self_test' to " \ 331 "use kernel and root filesystem on memory, boot in test " \ 332 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 333 "from memory and root filesystem over NFS; echo Type " \ 334 "'run net_nfs' to get Kernel over TFTP and mount root " \ 335 "filesystem over NFS; " \ 336 "echo Set partitionset_active variable to 'A' " \ 337 "or 'B' to select kernel and rootfs partition; " \ 338 "echo" \ 339 "\0" 340 341 /* 342 * Variant 1 partition layout 343 * chip-size = 256MiB 344 *| name | size | address area | 345 *------------------------------------------------------- 346 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 347 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 348 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 349 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 350 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 351 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 352 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 353 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 354 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 355 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 356 *------------------------------------------------------- 357 */ 358 #define MTDIDS_NAME_STR "omap2-nand.0" 359 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR 360 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ 361 "128k(spl)," \ 362 "128k(spl.backup1)," \ 363 "128k(spl.backup2)," \ 364 "128k(spl.backup3)," \ 365 "1920k(u-boot)," \ 366 "128k(uboot.env)," \ 367 "5120k(kernel_a)," \ 368 "5120k(kernel_b)," \ 369 "8192k(mtdoops)," \ 370 "-(rootfs)" 371 372 #define DFU_ALT_INFO_NAND_V1 \ 373 "spl part 0 1;" \ 374 "spl.backup1 part 0 2;" \ 375 "spl.backup2 part 0 3;" \ 376 "spl.backup3 part 0 4;" \ 377 "u-boot part 0 5;" \ 378 "u-boot.env part 0 6;" \ 379 "kernel_a part 0 7;" \ 380 "kernel_b part 0 8;" \ 381 "rootfs partubi 0 10" 382 383 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 384 "nand_active_ubi_vol=rootfs_a\0" \ 385 "nand_active_ubi_vol_A=rootfs_a\0" \ 386 "nand_active_ubi_vol_B=rootfs_b\0" \ 387 "nand_root_fs_type=ubifs rootwait=1\0" \ 388 "nand_src_addr=0x280000\0" \ 389 "nand_src_addr_A=0x280000\0" \ 390 "nand_src_addr_B=0x780000\0" \ 391 "nand_args=run bootargs_defaults;" \ 392 "mtdparts default;" \ 393 "setenv ${partitionset_active} true;" \ 394 "if test -n ${A}; then " \ 395 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 396 "setenv nand_src_addr ${nand_src_addr_A};" \ 397 "fi;" \ 398 "if test -n ${B}; then " \ 399 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 400 "setenv nand_src_addr ${nand_src_addr_B};" \ 401 "fi;" \ 402 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 403 "ubi.mtd=9,${ubi_off};" \ 404 "setenv bootargs ${bootargs} " \ 405 "root=${nand_root} noinitrd ${mtdparts} " \ 406 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 407 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 408 "=mtdoops\0" \ 409 COMMON_ENV_DFU_ARGS \ 410 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 411 COMMON_ENV_NAND_BOOT \ 412 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 413 "${nand_img_size}; bootm ${kloadaddr}\0" \ 414 COMMON_ENV_NAND_CMDS 415 416 #define CONFIG_ENV_SETTINGS_V1 \ 417 COMMON_ENV_SETTINGS \ 418 "net_args=run bootargs_defaults;" \ 419 "mtdparts default;" \ 420 "setenv bootfile ${project_dir}/kernel/uImage;" \ 421 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 422 "setenv bootargs ${bootargs} " \ 423 "root=/dev/nfs ${mtdparts} " \ 424 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 425 "ip=${ipaddr}:${serverip}:" \ 426 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 427 "net_nfs=echo Booting from network ...; " \ 428 "run net_args; " \ 429 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 430 "bootm ${kloadaddr}\0" 431 432 /* 433 * Variant 2 partition layout 434 * chip-size = 256MiB or 512 MiB 435 *| name | size | address area | 436 *------------------------------------------------------- 437 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 438 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 439 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 440 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 441 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 442 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 443 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 444 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 445 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 446 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 447 *------------------------------------------------------- 448 */ 449 450 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ 451 "128k(spl)," \ 452 "128k(spl.backup1)," \ 453 "128k(spl.backup2)," \ 454 "128k(spl.backup3)," \ 455 "1920k(u-boot)," \ 456 "512k(u-boot.env0)," \ 457 "512k(u-boot.env1)," \ 458 "512k(mtdoops)," \ 459 "-(rootfs)" 460 461 #define DFU_ALT_INFO_NAND_V2 \ 462 "spl part 0 1;" \ 463 "spl.backup1 part 0 2;" \ 464 "spl.backup2 part 0 3;" \ 465 "spl.backup3 part 0 4;" \ 466 "u-boot part 0 5;" \ 467 "u-boot.env0 part 0 6;" \ 468 "u-boot.env1 part 0 7;" \ 469 "rootfs partubi 0 9" \ 470 471 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 472 "nand_active_ubi_vol=rootfs_a\0" \ 473 "rootfs_name=rootfs\0" \ 474 "kernel_name=uImage\0"\ 475 "nand_root_fs_type=ubifs rootwait=1\0" \ 476 "nand_args=run bootargs_defaults;" \ 477 "mtdparts default;" \ 478 "setenv ${partitionset_active} true;" \ 479 "if test -n ${A}; then " \ 480 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 481 "fi;" \ 482 "if test -n ${B}; then " \ 483 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 484 "fi;" \ 485 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 486 "ubi.mtd=rootfs,2048;" \ 487 "setenv bootargs ${bootargs} " \ 488 "root=${nand_root} noinitrd ${mtdparts} " \ 489 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 490 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 491 "=mtdoops\0" \ 492 COMMON_ENV_DFU_ARGS \ 493 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 494 COMMON_ENV_NAND_BOOT \ 495 "ubi part rootfs ${ubi_off};" \ 496 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 497 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 498 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 499 "bootm ${kloadaddr} - ${loadaddr}\0" \ 500 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 501 "bootm ${kloadaddr} - ${loadaddr}\0" \ 502 COMMON_ENV_NAND_CMDS 503 504 #define CONFIG_ENV_SETTINGS_V2 \ 505 COMMON_ENV_SETTINGS \ 506 "net_args=run bootargs_defaults;" \ 507 "mtdparts default;" \ 508 "setenv bootfile ${project_dir}/kernel/uImage;" \ 509 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 510 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 511 "setenv bootargs ${bootargs} " \ 512 "root=/dev/nfs ${mtdparts} " \ 513 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 514 "ip=${ipaddr}:${serverip}:" \ 515 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 516 "net_nfs=echo Booting from network ...; " \ 517 "run net_args; " \ 518 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 519 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 520 "bootm ${kloadaddr} - ${loadaddr}\0" 521 522 /* 523 * Variant 3 partition layout 524 * chip-size = 512MiB 525 *| name | size | address area | 526 *------------------------------------------------------- 527 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 528 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 529 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 530 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 531 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 532 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 533 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 534 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 535 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 536 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 537 *------------------------------------------------------- 538 */ 539 540 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ 541 "128k(spl)," \ 542 "128k(spl.backup1)," \ 543 "128k(spl.backup2)," \ 544 "128k(spl.backup3)," \ 545 "1920k(u-boot)," \ 546 "512k(u-boot.env0)," \ 547 "512k(u-boot.env1)," \ 548 "300m(rootfs)," \ 549 "512k(mtdoops)," \ 550 "-(configuration)" 551 552 #define CONFIG_NAND_OMAP_GPMC 553 #define CONFIG_NAND_OMAP_ELM 554 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 555 /* to access nand at */ 556 /* CS0 */ 557 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 558 devices */ 559 #if !defined(CONFIG_SPI_BOOT) 560 #undef CONFIG_ENV_IS_NOWHERE 561 #define CONFIG_ENV_IS_IN_NAND 562 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 563 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 564 #endif 565 #endif 566 567 #define CONFIG_OMAP_GPIO 568 569 /* Gpio cmd support */ 570 571 /* Watchdog */ 572 #define CONFIG_HW_WATCHDOG 573 574 /* Reboot after 60 sec if bootcmd fails */ 575 #define CONFIG_RESET_TO_RETRY 576 #define CONFIG_BOOT_RETRY_TIME 60 577 578 #define CONFIG_BOOTCOUNT_LIMIT 579 #define CONFIG_BOOTCOUNT_ENV 580 581 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 582