1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #include <asm/arch/omap.h> 18 19 #define CONFIG_DMA_COHERENT 20 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 21 22 #define CONFIG_ENV_SIZE (0x2000) 23 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 24 #ifdef CONFIG_SIEMENS_MACH_TYPE 25 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 26 #endif 27 28 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 29 #define CONFIG_SETUP_MEMORY_TAGS 30 #define CONFIG_INITRD_TAG 31 32 /* commands to include */ 33 34 #ifndef CONFIG_SPL_BUILD 35 #define CONFIG_ROOTPATH "/opt/eldk" 36 #endif 37 38 #define CONFIG_ENV_OVERWRITE 1 39 40 #define CONFIG_SYS_AUTOLOAD "yes" 41 42 /* Clock Defines */ 43 #define V_OSCK 24000000 /* Clock output from T2 */ 44 #define V_SCLK (V_OSCK) 45 46 /* We set the max number of command args high to avoid HUSH bugs. */ 47 #define CONFIG_SYS_MAXARGS 32 48 49 /* Console I/O Buffer Size */ 50 #define CONFIG_SYS_CBSIZE 1024 51 52 /* Boot Argument Buffer Size */ 53 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 54 55 /* 56 * memtest works on 8 MB in DRAM after skipping 32MB from 57 * start addr of ram disk 58 */ 59 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 60 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 61 + (8 * 1024 * 1024)) 62 63 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 64 65 #define CONFIG_SPI 66 #define CONFIG_MTD_DEVICE 67 #define CONFIG_SF_DEFAULT_SPEED (75000000) 68 69 /* Physical Memory Map */ 70 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 71 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 72 73 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 74 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 75 GENERATED_GBL_DATA_SIZE) 76 /* Platform/Board specific defs */ 77 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 78 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 79 80 /* NS16550 Configuration */ 81 #ifdef CONFIG_SPL_BUILD 82 #define CONFIG_SYS_NS16550_SERIAL 83 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 84 #endif 85 #define CONFIG_SYS_NS16550_CLK (48000000) 86 #define CONFIG_SYS_NS16550_COM1 0x44e09000 87 #define CONFIG_SYS_NS16550_COM4 0x481a6000 88 89 #define CONFIG_SERIAL1 1 90 #define CONFIG_CONS_INDEX 1 91 92 /* I2C Configuration */ 93 #define CONFIG_I2C 94 #define CONFIG_SYS_I2C 95 96 /* Defines for SPL */ 97 #define CONFIG_SPL_TEXT_BASE 0x402F0400 98 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 99 CONFIG_SPL_TEXT_BASE) 100 101 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 102 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 103 104 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 105 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 106 107 #define CONFIG_SPL_SPI_LOAD 108 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 109 110 #define CONFIG_SPL_NAND_BASE 111 #define CONFIG_SPL_NAND_DRIVERS 112 #define CONFIG_SPL_NAND_ECC 113 #define CONFIG_SYS_NAND_ONFI_DETECTION 114 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 115 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 116 CONFIG_SYS_NAND_PAGE_SIZE) 117 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 118 #define CONFIG_SYS_NAND_OOBSIZE 64 119 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 120 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 121 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 122 10, 11, 12, 13, 14, 15, 16, 17, \ 123 18, 19, 20, 21, 22, 23, 24, 25, \ 124 26, 27, 28, 29, 30, 31, 32, 33, \ 125 34, 35, 36, 37, 38, 39, 40, 41, \ 126 42, 43, 44, 45, 46, 47, 48, 49, \ 127 50, 51, 52, 53, 54, 55, 56, 57, } 128 129 #define CONFIG_SYS_NAND_ECCSIZE 512 130 #define CONFIG_SYS_NAND_ECCBYTES 14 131 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 132 133 #define CONFIG_SYS_NAND_ECCSTEPS 4 134 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 135 CONFIG_SYS_NAND_ECCSTEPS) 136 137 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 138 139 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 140 141 /* 142 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 143 * 64 bytes before this address should be set aside for u-boot.img's 144 * header. That is 0x800FFFC0--0x80100000 should not be used for any 145 * other needs. 146 */ 147 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 148 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 149 150 /* 151 * Since SPL did pll and ddr initialization for us, 152 * we don't need to do it twice. 153 */ 154 #ifndef CONFIG_SPL_BUILD 155 #define CONFIG_SKIP_LOWLEVEL_INIT 156 #endif 157 158 #ifndef CONFIG_SPL_BUILD 159 /* 160 * USB configuration 161 */ 162 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 163 164 #define CONFIG_AM335X_USB0 165 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 166 #define CONFIG_AM335X_USB1 167 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 168 169 /* USB DRACO ID as default */ 170 #define CONFIG_USBD_HS 171 172 /* USB Device Firmware Update support */ 173 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 174 #define DFU_MANIFEST_POLL_TIMEOUT 25000 175 176 #endif /* CONFIG_SPL_BUILD */ 177 178 /* 179 * Default to using SPI for environment, etc. We have multiple copies 180 * of SPL as the ROM will check these locations. 181 * 0x0 - 0x20000 : First copy of SPL 182 * 0x20000 - 0x40000 : Second copy of SPL 183 * 0x40000 - 0x60000 : Third copy of SPL 184 * 0x60000 - 0x80000 : Fourth copy of SPL 185 * 0x80000 - 0xDF000 : U-Boot 186 * 0xDF000 - 0xE0000 : U-Boot Environment 187 * 0xE0000 - 0x442000 : Linux Kernel 188 * 0x442000 - 0x800000 : Userland 189 */ 190 #if defined(CONFIG_SPI_BOOT) 191 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 192 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 193 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 194 #endif /* SPI support */ 195 196 #define CONFIG_DRIVER_TI_CPSW 197 #define CONFIG_MII 198 #define CONFIG_BOOTP_DEFAULT 199 #define CONFIG_BOOTP_DNS2 200 #define CONFIG_BOOTP_SEND_HOSTNAME 201 #define CONFIG_NET_RETRY_COUNT 10 202 203 /* NAND support */ 204 #ifdef CONFIG_NAND 205 /* UBI Support */ 206 #ifndef CONFIG_SPL_BUILD 207 #define CONFIG_MTD_PARTITIONS 208 #define CONFIG_MTD_DEVICE 209 #endif 210 211 /* Commen environment */ 212 #define CONFIG_PREBOOT 213 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 214 "setenv bootargs ${bootargs};" \ 215 "mtdparts default;" \ 216 "draco_led 1;" \ 217 "dfu 0 nand 0;" \ 218 "draco_led 0;\0" \ 219 220 #define COMMON_ENV_NAND_BOOT \ 221 "nand_boot=echo Booting from nand; " \ 222 "if test ${upgrade_available} -eq 1; then " \ 223 "if test ${bootcount} -gt ${bootlimit}; " \ 224 "then " \ 225 "setenv upgrade_available 0;" \ 226 "setenv ${partitionset_active} true;" \ 227 "if test -n ${A}; then " \ 228 "setenv partitionset_active B; " \ 229 "env delete A; " \ 230 "fi;" \ 231 "if test -n ${B}; then " \ 232 "setenv partitionset_active A; " \ 233 "env delete B; " \ 234 "fi;" \ 235 "saveenv; " \ 236 "fi;" \ 237 "fi;" \ 238 "echo set ${partitionset_active}...;" \ 239 "run nand_args; " 240 241 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 242 "flash_self_test=setenv testargs test; " \ 243 "run nand_boot\0" \ 244 "dfu_start=echo Preparing for dfu mode ...; " \ 245 "run dfu_args; \0" 246 247 #define COMMON_ENV_SETTINGS \ 248 "verify=no \0" \ 249 "project_dir=targetdir\0" \ 250 "upgrade_available=0\0" \ 251 "altbootcmd=run bootcmd\0" \ 252 "bootlimit=3\0" \ 253 "partitionset_active=A\0" \ 254 "loadaddr=0x82000000\0" \ 255 "kloadaddr=0x81000000\0" \ 256 "script_addr=0x81900000\0" \ 257 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 258 "nfsopts=nolock rw\0" \ 259 "ip_method=none\0" \ 260 "bootenv=uEnv.txt\0" \ 261 "bootargs_defaults=setenv bootargs " \ 262 "console=${console} " \ 263 "${testargs} " \ 264 "${optargs}\0" \ 265 "siemens_help=echo; "\ 266 "echo Type 'run flash_self' to use kernel and root " \ 267 "filesystem on memory; echo Type 'run flash_self_test' to " \ 268 "use kernel and root filesystem on memory, boot in test " \ 269 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 270 "from memory and root filesystem over NFS; echo Type " \ 271 "'run net_nfs' to get Kernel over TFTP and mount root " \ 272 "filesystem over NFS; " \ 273 "echo Set partitionset_active variable to 'A' " \ 274 "or 'B' to select kernel and rootfs partition; " \ 275 "echo" \ 276 "\0" 277 278 /* 279 * Variant 1 partition layout 280 * chip-size = 256MiB 281 *| name | size | address area | 282 *------------------------------------------------------- 283 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 284 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 285 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 286 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 287 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 288 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 289 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 290 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 291 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 292 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 293 *------------------------------------------------------- 294 295 "mtdparts=omap2-nand.0:" \ 296 "128k(spl)," \ 297 "128k(spl.backup1)," \ 298 "128k(spl.backup2)," \ 299 "128k(spl.backup3)," \ 300 "1920k(u-boot)," \ 301 "128k(uboot.env)," \ 302 "5120k(kernel_a)," \ 303 "5120k(kernel_b)," \ 304 "8192k(mtdoops)," \ 305 "-(rootfs)" 306 */ 307 308 #define DFU_ALT_INFO_NAND_V1 \ 309 "spl part 0 1;" \ 310 "spl.backup1 part 0 2;" \ 311 "spl.backup2 part 0 3;" \ 312 "spl.backup3 part 0 4;" \ 313 "u-boot part 0 5;" \ 314 "u-boot.env part 0 6;" \ 315 "kernel_a part 0 7;" \ 316 "kernel_b part 0 8;" \ 317 "rootfs partubi 0 10" 318 319 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 320 "nand_active_ubi_vol=rootfs_a\0" \ 321 "nand_active_ubi_vol_A=rootfs_a\0" \ 322 "nand_active_ubi_vol_B=rootfs_b\0" \ 323 "nand_root_fs_type=ubifs rootwait=1\0" \ 324 "nand_src_addr=0x280000\0" \ 325 "nand_src_addr_A=0x280000\0" \ 326 "nand_src_addr_B=0x780000\0" \ 327 "nand_args=run bootargs_defaults;" \ 328 "mtdparts default;" \ 329 "setenv ${partitionset_active} true;" \ 330 "if test -n ${A}; then " \ 331 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 332 "setenv nand_src_addr ${nand_src_addr_A};" \ 333 "fi;" \ 334 "if test -n ${B}; then " \ 335 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 336 "setenv nand_src_addr ${nand_src_addr_B};" \ 337 "fi;" \ 338 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 339 "ubi.mtd=9,${ubi_off};" \ 340 "setenv bootargs ${bootargs} " \ 341 "root=${nand_root} noinitrd ${mtdparts} " \ 342 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 343 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 344 "=mtdoops\0" \ 345 COMMON_ENV_DFU_ARGS \ 346 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 347 COMMON_ENV_NAND_BOOT \ 348 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 349 "${nand_img_size}; bootm ${kloadaddr}\0" \ 350 COMMON_ENV_NAND_CMDS 351 352 #define CONFIG_ENV_SETTINGS_V1 \ 353 COMMON_ENV_SETTINGS \ 354 "net_args=run bootargs_defaults;" \ 355 "mtdparts default;" \ 356 "setenv bootfile ${project_dir}/kernel/uImage;" \ 357 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 358 "setenv bootargs ${bootargs} " \ 359 "root=/dev/nfs ${mtdparts} " \ 360 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 361 "ip=${ipaddr}:${serverip}:" \ 362 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 363 "net_nfs=echo Booting from network ...; " \ 364 "run net_args; " \ 365 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 366 "bootm ${kloadaddr}\0" 367 368 /* 369 * Variant 2 partition layout (default) 370 * chip-size = 256MiB or 512 MiB 371 *| name | size | address area | 372 *------------------------------------------------------- 373 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 374 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 375 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 376 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 377 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 378 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 379 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 380 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 381 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 382 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 383 *------------------------------------------------------- 384 */ 385 386 #define DFU_ALT_INFO_NAND_V2 \ 387 "spl part 0 1;" \ 388 "spl.backup1 part 0 2;" \ 389 "spl.backup2 part 0 3;" \ 390 "spl.backup3 part 0 4;" \ 391 "u-boot part 0 5;" \ 392 "u-boot.env0 part 0 6;" \ 393 "u-boot.env1 part 0 7;" \ 394 "rootfs partubi 0 9" \ 395 396 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 397 "nand_active_ubi_vol=rootfs_a\0" \ 398 "rootfs_name=rootfs\0" \ 399 "kernel_name=uImage\0"\ 400 "nand_root_fs_type=ubifs rootwait=1\0" \ 401 "nand_args=run bootargs_defaults;" \ 402 "mtdparts default;" \ 403 "setenv ${partitionset_active} true;" \ 404 "if test -n ${A}; then " \ 405 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 406 "fi;" \ 407 "if test -n ${B}; then " \ 408 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 409 "fi;" \ 410 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 411 "ubi.mtd=rootfs,2048;" \ 412 "setenv bootargs ${bootargs} " \ 413 "root=${nand_root} noinitrd ${mtdparts} " \ 414 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 415 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 416 "=mtdoops\0" \ 417 COMMON_ENV_DFU_ARGS \ 418 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 419 COMMON_ENV_NAND_BOOT \ 420 "ubi part rootfs ${ubi_off};" \ 421 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 422 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 423 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 424 "bootm ${kloadaddr} - ${loadaddr}\0" \ 425 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 426 "bootm ${kloadaddr} - ${loadaddr}\0" \ 427 COMMON_ENV_NAND_CMDS 428 429 #define CONFIG_ENV_SETTINGS_V2 \ 430 COMMON_ENV_SETTINGS \ 431 "net_args=run bootargs_defaults;" \ 432 "mtdparts default;" \ 433 "setenv bootfile ${project_dir}/kernel/uImage;" \ 434 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 435 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 436 "setenv bootargs ${bootargs} " \ 437 "root=/dev/nfs ${mtdparts} " \ 438 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 439 "ip=${ipaddr}:${serverip}:" \ 440 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 441 "net_nfs=echo Booting from network ...; " \ 442 "run net_args; " \ 443 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 444 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 445 "bootm ${kloadaddr} - ${loadaddr}\0" 446 447 /* 448 * Variant 3 partition layout 449 * chip-size = 512MiB 450 *| name | size | address area | 451 *------------------------------------------------------- 452 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 453 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 454 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 455 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 456 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 457 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 458 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 459 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 460 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 461 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 462 *------------------------------------------------------- 463 464 "mtdparts=omap2-nand.0:" \ 465 "128k(spl)," \ 466 "128k(spl.backup1)," \ 467 "128k(spl.backup2)," \ 468 "128k(spl.backup3)," \ 469 "1920k(u-boot)," \ 470 "512k(u-boot.env0)," \ 471 "512k(u-boot.env1)," \ 472 "300m(rootfs)," \ 473 "512k(mtdoops)," \ 474 "-(configuration)" 475 476 */ 477 478 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 479 /* to access nand at */ 480 /* CS0 */ 481 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 482 devices */ 483 #if !defined(CONFIG_SPI_BOOT) 484 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 485 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 486 #endif 487 #endif 488 489 /* Reboot after 60 sec if bootcmd fails */ 490 #define CONFIG_RESET_TO_RETRY 491 #define CONFIG_BOOT_RETRY_TIME 60 492 493 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 494