1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #define CONFIG_AM33XX 18 #define CONFIG_OMAP 19 20 #include <asm/arch/omap.h> 21 22 #define CONFIG_DMA_COHERENT 23 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 24 25 #define CONFIG_ENV_SIZE (0x2000) 26 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 27 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 28 #define CONFIG_BOARD_LATE_INIT 29 #define CONFIG_SYS_NO_FLASH 30 #ifdef CONFIG_SIEMENS_MACH_TYPE 31 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 32 #endif 33 34 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 35 #define CONFIG_SETUP_MEMORY_TAGS 36 #define CONFIG_INITRD_TAG 37 38 /* commands to include */ 39 40 #define CONFIG_ENV_VARS_UBOOT_CONFIG 41 #ifndef CONFIG_SPL_BUILD 42 #define CONFIG_ROOTPATH "/opt/eldk" 43 #endif 44 45 #define CONFIG_ENV_OVERWRITE 1 46 #define CONFIG_ENV_IS_NOWHERE 47 48 #define CONFIG_SYS_LONGHELP 49 #define CONFIG_CMDLINE_EDITING 50 #define CONFIG_AUTO_COMPLETE 51 #define CONFIG_SYS_AUTOLOAD "yes" 52 53 /* Clock Defines */ 54 #define V_OSCK 24000000 /* Clock output from T2 */ 55 #define V_SCLK (V_OSCK) 56 57 /* We set the max number of command args high to avoid HUSH bugs. */ 58 #define CONFIG_SYS_MAXARGS 32 59 60 /* Console I/O Buffer Size */ 61 #define CONFIG_SYS_CBSIZE 1024 62 63 /* Print Buffer Size */ 64 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 65 + sizeof(CONFIG_SYS_PROMPT) + 16) 66 67 /* Boot Argument Buffer Size */ 68 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 69 70 /* 71 * memtest works on 8 MB in DRAM after skipping 32MB from 72 * start addr of ram disk 73 */ 74 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 75 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 76 + (8 * 1024 * 1024)) 77 78 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 79 80 #define CONFIG_MMC 81 #define CONFIG_GENERIC_MMC 82 #define CONFIG_OMAP_HSMMC 83 #define CONFIG_DOS_PARTITION 84 85 #define CONFIG_SPI 86 #define CONFIG_OMAP3_SPI 87 #define CONFIG_MTD_DEVICE 88 #define CONFIG_SF_DEFAULT_SPEED (75000000) 89 90 /* Physical Memory Map */ 91 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 92 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 93 94 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 95 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 96 GENERATED_GBL_DATA_SIZE) 97 /* Platform/Board specific defs */ 98 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 99 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 100 101 /* NS16550 Configuration */ 102 #ifdef CONFIG_SPL_BUILD 103 #define CONFIG_SYS_NS16550_SERIAL 104 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 105 #endif 106 #define CONFIG_SYS_NS16550_CLK (48000000) 107 #define CONFIG_SYS_NS16550_COM1 0x44e09000 108 #define CONFIG_SYS_NS16550_COM4 0x481a6000 109 110 #define CONFIG_BAUDRATE 115200 111 112 #define CONFIG_SERIAL1 1 113 #define CONFIG_CONS_INDEX 1 114 115 /* I2C Configuration */ 116 #define CONFIG_I2C 117 #define CONFIG_SYS_I2C 118 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 119 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 120 #define CONFIG_SYS_I2C_OMAP24XX 121 122 /* Defines for SPL */ 123 #define CONFIG_SPL_FRAMEWORK 124 #define CONFIG_SPL_TEXT_BASE 0x402F0400 125 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 126 CONFIG_SPL_TEXT_BASE) 127 128 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 129 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 130 131 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 132 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 133 #define CONFIG_FS_FAT 134 135 #define CONFIG_SPL_SPI_LOAD 136 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 137 138 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds" 139 140 #define CONFIG_SPL_BOARD_INIT 141 #define CONFIG_SPL_NAND_AM33XX_BCH 142 #define CONFIG_SPL_NAND_BASE 143 #define CONFIG_SPL_NAND_DRIVERS 144 #define CONFIG_SPL_NAND_ECC 145 #define CONFIG_SYS_NAND_ONFI_DETECTION 146 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 147 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 148 CONFIG_SYS_NAND_PAGE_SIZE) 149 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 150 #define CONFIG_SYS_NAND_OOBSIZE 64 151 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 152 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 153 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 154 10, 11, 12, 13, 14, 15, 16, 17, \ 155 18, 19, 20, 21, 22, 23, 24, 25, \ 156 26, 27, 28, 29, 30, 31, 32, 33, \ 157 34, 35, 36, 37, 38, 39, 40, 41, \ 158 42, 43, 44, 45, 46, 47, 48, 49, \ 159 50, 51, 52, 53, 54, 55, 56, 57, } 160 161 #define CONFIG_SYS_NAND_ECCSIZE 512 162 #define CONFIG_SYS_NAND_ECCBYTES 14 163 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 164 165 #define CONFIG_SYS_NAND_ECCSTEPS 4 166 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 167 CONFIG_SYS_NAND_ECCSTEPS) 168 169 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 170 171 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 172 173 /* 174 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 175 * 64 bytes before this address should be set aside for u-boot.img's 176 * header. That is 0x800FFFC0--0x80100000 should not be used for any 177 * other needs. 178 */ 179 #define CONFIG_SYS_TEXT_BASE 0x80100000 180 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 181 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 182 183 /* 184 * Since SPL did pll and ddr initialization for us, 185 * we don't need to do it twice. 186 */ 187 #ifndef CONFIG_SPL_BUILD 188 #define CONFIG_SKIP_LOWLEVEL_INIT 189 #endif 190 191 #ifndef CONFIG_SPL_BUILD 192 /* 193 * USB configuration 194 */ 195 #define CONFIG_USB_MUSB_DSPS 196 #define CONFIG_ARCH_MISC_INIT 197 #define CONFIG_USB_MUSB_PIO_ONLY 198 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 199 #undef CONFIG_USB_GADGET_DUALSPEED 200 201 #define CONFIG_AM335X_USB0 202 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 203 #define CONFIG_AM335X_USB1 204 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 205 206 #ifdef CONFIG_USB_MUSB_GADGET 207 #define CONFIG_USB_ETHER 208 #define CONFIG_USB_ETH_RNDIS 209 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" 210 #endif /* CONFIG_USB_MUSB_GADGET */ 211 212 /* USB DRACO ID as default */ 213 #define CONFIG_USBD_HS 214 215 /* USB Device Firmware Update support */ 216 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 217 #define DFU_MANIFEST_POLL_TIMEOUT 25000 218 219 #endif /* CONFIG_SPL_BUILD */ 220 221 /* 222 * Default to using SPI for environment, etc. We have multiple copies 223 * of SPL as the ROM will check these locations. 224 * 0x0 - 0x20000 : First copy of SPL 225 * 0x20000 - 0x40000 : Second copy of SPL 226 * 0x40000 - 0x60000 : Third copy of SPL 227 * 0x60000 - 0x80000 : Fourth copy of SPL 228 * 0x80000 - 0xDF000 : U-Boot 229 * 0xDF000 - 0xE0000 : U-Boot Environment 230 * 0xE0000 - 0x442000 : Linux Kernel 231 * 0x442000 - 0x800000 : Userland 232 */ 233 #if defined(CONFIG_SPI_BOOT) 234 # undef CONFIG_ENV_IS_NOWHERE 235 # define CONFIG_ENV_IS_IN_SPI_FLASH 236 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 237 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 238 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 239 #endif /* SPI support */ 240 241 /* Unsupported features */ 242 #undef CONFIG_USE_IRQ 243 244 #define CONFIG_DRIVER_TI_CPSW 245 #define CONFIG_MII 246 #define CONFIG_PHY_GIGE 247 #define CONFIG_PHYLIB 248 #define CONFIG_BOOTP_DEFAULT 249 #define CONFIG_BOOTP_DNS 250 #define CONFIG_BOOTP_DNS2 251 #define CONFIG_BOOTP_SEND_HOSTNAME 252 #define CONFIG_BOOTP_GATEWAY 253 #define CONFIG_BOOTP_SUBNETMASK 254 #define CONFIG_NET_RETRY_COUNT 10 255 256 #define CONFIG_NAND 257 /* NAND support */ 258 #ifdef CONFIG_NAND 259 #define CONFIG_CMD_NAND 260 261 /* UBI Support */ 262 #ifndef CONFIG_SPL_BUILD 263 #define CONFIG_CMD_MTDPARTS 264 #define CONFIG_MTD_PARTITIONS 265 #define CONFIG_MTD_DEVICE 266 #define CONFIG_RBTREE 267 #define CONFIG_LZO 268 #define CONFIG_CMD_UBIFS 269 #endif 270 271 /* Commen environment */ 272 #define CONFIG_PREBOOT 273 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 274 "setenv bootargs ${bootargs};" \ 275 "mtdparts default;" \ 276 "draco_led 1;" \ 277 "dfu 0 nand 0;" \ 278 "draco_led 0;\0" \ 279 280 #define COMMON_ENV_NAND_BOOT \ 281 "nand_boot=echo Booting from nand; " \ 282 "if test ${upgrade_available} -eq 1; then " \ 283 "if test ${bootcount} -gt ${bootlimit}; " \ 284 "then " \ 285 "setenv upgrade_available 0;" \ 286 "setenv ${partitionset_active} true;" \ 287 "if test -n ${A}; then " \ 288 "setenv partitionset_active B; " \ 289 "env delete A; " \ 290 "fi;" \ 291 "if test -n ${B}; then " \ 292 "setenv partitionset_active A; " \ 293 "env delete B; " \ 294 "fi;" \ 295 "saveenv; " \ 296 "fi;" \ 297 "fi;" \ 298 "echo set ${partitionset_active}...;" \ 299 "run nand_args; " 300 301 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 302 "flash_self_test=setenv testargs test; " \ 303 "run nand_boot\0" \ 304 "dfu_start=echo Preparing for dfu mode ...; " \ 305 "run dfu_args; \0" 306 307 #define COMMON_ENV_SETTINGS \ 308 "verify=no \0" \ 309 "project_dir=targetdir\0" \ 310 "upgrade_available=0\0" \ 311 "altbootcmd=run bootcmd\0" \ 312 "bootlimit=3\0" \ 313 "partitionset_active=A\0" \ 314 "loadaddr=0x82000000\0" \ 315 "kloadaddr=0x81000000\0" \ 316 "script_addr=0x81900000\0" \ 317 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 318 "nfsopts=nolock rw\0" \ 319 "ip_method=none\0" \ 320 "bootenv=uEnv.txt\0" \ 321 "bootargs_defaults=setenv bootargs " \ 322 "console=${console} " \ 323 "${testargs} " \ 324 "${optargs}\0" \ 325 "siemens_help=echo; "\ 326 "echo Type 'run flash_self' to use kernel and root " \ 327 "filesystem on memory; echo Type 'run flash_self_test' to " \ 328 "use kernel and root filesystem on memory, boot in test " \ 329 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 330 "from memory and root filesystem over NFS; echo Type " \ 331 "'run net_nfs' to get Kernel over TFTP and mount root " \ 332 "filesystem over NFS; " \ 333 "echo Set partitionset_active variable to 'A' " \ 334 "or 'B' to select kernel and rootfs partition; " \ 335 "echo" \ 336 "\0" 337 338 /* 339 * Variant 1 partition layout 340 * chip-size = 256MiB 341 *| name | size | address area | 342 *------------------------------------------------------- 343 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 344 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 345 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 346 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 347 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 348 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 349 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 350 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 351 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 352 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 353 *------------------------------------------------------- 354 */ 355 #define MTDIDS_NAME_STR "omap2-nand.0" 356 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR 357 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ 358 "128k(spl)," \ 359 "128k(spl.backup1)," \ 360 "128k(spl.backup2)," \ 361 "128k(spl.backup3)," \ 362 "1920k(u-boot)," \ 363 "128k(uboot.env)," \ 364 "5120k(kernel_a)," \ 365 "5120k(kernel_b)," \ 366 "8192k(mtdoops)," \ 367 "-(rootfs)" 368 369 #define DFU_ALT_INFO_NAND_V1 \ 370 "spl part 0 1;" \ 371 "spl.backup1 part 0 2;" \ 372 "spl.backup2 part 0 3;" \ 373 "spl.backup3 part 0 4;" \ 374 "u-boot part 0 5;" \ 375 "u-boot.env part 0 6;" \ 376 "kernel_a part 0 7;" \ 377 "kernel_b part 0 8;" \ 378 "rootfs partubi 0 10" 379 380 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 381 "nand_active_ubi_vol=rootfs_a\0" \ 382 "nand_active_ubi_vol_A=rootfs_a\0" \ 383 "nand_active_ubi_vol_B=rootfs_b\0" \ 384 "nand_root_fs_type=ubifs rootwait=1\0" \ 385 "nand_src_addr=0x280000\0" \ 386 "nand_src_addr_A=0x280000\0" \ 387 "nand_src_addr_B=0x780000\0" \ 388 "nand_args=run bootargs_defaults;" \ 389 "mtdparts default;" \ 390 "setenv ${partitionset_active} true;" \ 391 "if test -n ${A}; then " \ 392 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 393 "setenv nand_src_addr ${nand_src_addr_A};" \ 394 "fi;" \ 395 "if test -n ${B}; then " \ 396 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 397 "setenv nand_src_addr ${nand_src_addr_B};" \ 398 "fi;" \ 399 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 400 "ubi.mtd=9,${ubi_off};" \ 401 "setenv bootargs ${bootargs} " \ 402 "root=${nand_root} noinitrd ${mtdparts} " \ 403 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 404 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 405 "=mtdoops\0" \ 406 COMMON_ENV_DFU_ARGS \ 407 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 408 COMMON_ENV_NAND_BOOT \ 409 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 410 "${nand_img_size}; bootm ${kloadaddr}\0" \ 411 COMMON_ENV_NAND_CMDS 412 413 #define CONFIG_ENV_SETTINGS_V1 \ 414 COMMON_ENV_SETTINGS \ 415 "net_args=run bootargs_defaults;" \ 416 "mtdparts default;" \ 417 "setenv bootfile ${project_dir}/kernel/uImage;" \ 418 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 419 "setenv bootargs ${bootargs} " \ 420 "root=/dev/nfs ${mtdparts} " \ 421 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 422 "ip=${ipaddr}:${serverip}:" \ 423 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 424 "net_nfs=echo Booting from network ...; " \ 425 "run net_args; " \ 426 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 427 "bootm ${kloadaddr}\0" 428 429 /* 430 * Variant 2 partition layout 431 * chip-size = 256MiB or 512 MiB 432 *| name | size | address area | 433 *------------------------------------------------------- 434 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 435 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 436 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 437 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 438 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 439 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 440 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 441 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 442 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 443 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 444 *------------------------------------------------------- 445 */ 446 447 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ 448 "128k(spl)," \ 449 "128k(spl.backup1)," \ 450 "128k(spl.backup2)," \ 451 "128k(spl.backup3)," \ 452 "1920k(u-boot)," \ 453 "512k(u-boot.env0)," \ 454 "512k(u-boot.env1)," \ 455 "512k(mtdoops)," \ 456 "-(rootfs)" 457 458 #define DFU_ALT_INFO_NAND_V2 \ 459 "spl part 0 1;" \ 460 "spl.backup1 part 0 2;" \ 461 "spl.backup2 part 0 3;" \ 462 "spl.backup3 part 0 4;" \ 463 "u-boot part 0 5;" \ 464 "u-boot.env0 part 0 6;" \ 465 "u-boot.env1 part 0 7;" \ 466 "rootfs partubi 0 9" \ 467 468 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 469 "nand_active_ubi_vol=rootfs_a\0" \ 470 "rootfs_name=rootfs\0" \ 471 "kernel_name=uImage\0"\ 472 "nand_root_fs_type=ubifs rootwait=1\0" \ 473 "nand_args=run bootargs_defaults;" \ 474 "mtdparts default;" \ 475 "setenv ${partitionset_active} true;" \ 476 "if test -n ${A}; then " \ 477 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 478 "fi;" \ 479 "if test -n ${B}; then " \ 480 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 481 "fi;" \ 482 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 483 "ubi.mtd=rootfs,2048;" \ 484 "setenv bootargs ${bootargs} " \ 485 "root=${nand_root} noinitrd ${mtdparts} " \ 486 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 487 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 488 "=mtdoops\0" \ 489 COMMON_ENV_DFU_ARGS \ 490 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 491 COMMON_ENV_NAND_BOOT \ 492 "ubi part rootfs ${ubi_off};" \ 493 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 494 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 495 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 496 "bootm ${kloadaddr} - ${loadaddr}\0" \ 497 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 498 "bootm ${kloadaddr} - ${loadaddr}\0" \ 499 COMMON_ENV_NAND_CMDS 500 501 #define CONFIG_ENV_SETTINGS_V2 \ 502 COMMON_ENV_SETTINGS \ 503 "net_args=run bootargs_defaults;" \ 504 "mtdparts default;" \ 505 "setenv bootfile ${project_dir}/kernel/uImage;" \ 506 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 507 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 508 "setenv bootargs ${bootargs} " \ 509 "root=/dev/nfs ${mtdparts} " \ 510 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 511 "ip=${ipaddr}:${serverip}:" \ 512 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 513 "net_nfs=echo Booting from network ...; " \ 514 "run net_args; " \ 515 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 516 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 517 "bootm ${kloadaddr} - ${loadaddr}\0" 518 519 /* 520 * Variant 3 partition layout 521 * chip-size = 512MiB 522 *| name | size | address area | 523 *------------------------------------------------------- 524 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 525 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 526 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 527 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 528 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 529 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 530 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 531 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 532 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 533 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 534 *------------------------------------------------------- 535 */ 536 537 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ 538 "128k(spl)," \ 539 "128k(spl.backup1)," \ 540 "128k(spl.backup2)," \ 541 "128k(spl.backup3)," \ 542 "1920k(u-boot)," \ 543 "512k(u-boot.env0)," \ 544 "512k(u-boot.env1)," \ 545 "300m(rootfs)," \ 546 "512k(mtdoops)," \ 547 "-(configuration)" 548 549 #define CONFIG_NAND_OMAP_GPMC 550 #define CONFIG_NAND_OMAP_ELM 551 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 552 /* to access nand at */ 553 /* CS0 */ 554 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 555 devices */ 556 #if !defined(CONFIG_SPI_BOOT) 557 #undef CONFIG_ENV_IS_NOWHERE 558 #define CONFIG_ENV_IS_IN_NAND 559 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 560 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 561 #endif 562 #endif 563 564 #define CONFIG_OMAP_GPIO 565 566 /* Gpio cmd support */ 567 568 /* Watchdog */ 569 #define CONFIG_HW_WATCHDOG 570 571 /* Reboot after 60 sec if bootcmd fails */ 572 #define CONFIG_RESET_TO_RETRY 573 #define CONFIG_BOOT_RETRY_TIME 60 574 575 #define CONFIG_BOOTCOUNT_LIMIT 576 #define CONFIG_BOOTCOUNT_ENV 577 578 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 579