1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * siemens am33x common board options 4 * (C) Copyright 2013 Siemens Schweiz AG 5 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 6 * 7 * Based on: 8 * U-Boot file:/include/configs/am335x_evm.h 9 * 10 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 11 */ 12 13 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 14 #define __CONFIG_SIEMENS_AM33X_COMMON_H 15 16 #include <asm/arch/omap.h> 17 18 #define CONFIG_DMA_COHERENT 19 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 20 21 #define CONFIG_ENV_SIZE (0x2000) 22 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 23 #ifdef CONFIG_SIEMENS_MACH_TYPE 24 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 25 #endif 26 27 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 28 #define CONFIG_SETUP_MEMORY_TAGS 29 #define CONFIG_INITRD_TAG 30 31 /* commands to include */ 32 33 #ifndef CONFIG_SPL_BUILD 34 #define CONFIG_ROOTPATH "/opt/eldk" 35 #endif 36 37 #define CONFIG_ENV_OVERWRITE 1 38 39 #define CONFIG_SYS_AUTOLOAD "yes" 40 41 /* Clock Defines */ 42 #define V_OSCK 24000000 /* Clock output from T2 */ 43 #define V_SCLK (V_OSCK) 44 45 /* We set the max number of command args high to avoid HUSH bugs. */ 46 #define CONFIG_SYS_MAXARGS 32 47 48 /* Console I/O Buffer Size */ 49 #define CONFIG_SYS_CBSIZE 1024 50 51 /* Boot Argument Buffer Size */ 52 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 53 54 /* 55 * memtest works on 8 MB in DRAM after skipping 32MB from 56 * start addr of ram disk 57 */ 58 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 59 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 60 + (8 * 1024 * 1024)) 61 62 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 63 64 #define CONFIG_SF_DEFAULT_SPEED (75000000) 65 66 /* Physical Memory Map */ 67 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 68 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 69 70 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 71 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 72 GENERATED_GBL_DATA_SIZE) 73 /* Platform/Board specific defs */ 74 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 75 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 76 77 /* NS16550 Configuration */ 78 #ifdef CONFIG_SPL_BUILD 79 #define CONFIG_SYS_NS16550_SERIAL 80 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 81 #endif 82 #define CONFIG_SYS_NS16550_CLK (48000000) 83 #define CONFIG_SYS_NS16550_COM1 0x44e09000 84 #define CONFIG_SYS_NS16550_COM4 0x481a6000 85 86 #define CONFIG_SERIAL1 1 87 88 /* I2C Configuration */ 89 #define CONFIG_I2C 90 #define CONFIG_SYS_I2C 91 92 /* Defines for SPL */ 93 #define CONFIG_SPL_TEXT_BASE 0x402F0400 94 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 95 CONFIG_SPL_TEXT_BASE) 96 97 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 98 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 99 100 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 101 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 102 103 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 104 105 #define CONFIG_SPL_NAND_BASE 106 #define CONFIG_SPL_NAND_DRIVERS 107 #define CONFIG_SPL_NAND_ECC 108 #define CONFIG_SYS_NAND_ONFI_DETECTION 109 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 110 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 111 CONFIG_SYS_NAND_PAGE_SIZE) 112 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 113 #define CONFIG_SYS_NAND_OOBSIZE 64 114 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 115 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 116 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 117 10, 11, 12, 13, 14, 15, 16, 17, \ 118 18, 19, 20, 21, 22, 23, 24, 25, \ 119 26, 27, 28, 29, 30, 31, 32, 33, \ 120 34, 35, 36, 37, 38, 39, 40, 41, \ 121 42, 43, 44, 45, 46, 47, 48, 49, \ 122 50, 51, 52, 53, 54, 55, 56, 57, } 123 124 #define CONFIG_SYS_NAND_ECCSIZE 512 125 #define CONFIG_SYS_NAND_ECCBYTES 14 126 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 127 128 #define CONFIG_SYS_NAND_ECCSTEPS 4 129 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 130 CONFIG_SYS_NAND_ECCSTEPS) 131 132 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 133 134 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 135 136 /* 137 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 138 * 64 bytes before this address should be set aside for u-boot.img's 139 * header. That is 0x800FFFC0--0x80100000 should not be used for any 140 * other needs. 141 */ 142 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 143 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 144 145 /* 146 * Since SPL did pll and ddr initialization for us, 147 * we don't need to do it twice. 148 */ 149 #ifndef CONFIG_SPL_BUILD 150 #define CONFIG_SKIP_LOWLEVEL_INIT 151 #endif 152 153 #ifndef CONFIG_SPL_BUILD 154 /* 155 * USB configuration 156 */ 157 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 158 159 #define CONFIG_AM335X_USB0 160 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 161 #define CONFIG_AM335X_USB1 162 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 163 164 /* USB DRACO ID as default */ 165 #define CONFIG_USBD_HS 166 167 /* USB Device Firmware Update support */ 168 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 169 #define DFU_MANIFEST_POLL_TIMEOUT 25000 170 171 #endif /* CONFIG_SPL_BUILD */ 172 173 /* 174 * Default to using SPI for environment, etc. We have multiple copies 175 * of SPL as the ROM will check these locations. 176 * 0x0 - 0x20000 : First copy of SPL 177 * 0x20000 - 0x40000 : Second copy of SPL 178 * 0x40000 - 0x60000 : Third copy of SPL 179 * 0x60000 - 0x80000 : Fourth copy of SPL 180 * 0x80000 - 0xDF000 : U-Boot 181 * 0xDF000 - 0xE0000 : U-Boot Environment 182 * 0xE0000 - 0x442000 : Linux Kernel 183 * 0x442000 - 0x800000 : Userland 184 */ 185 #if defined(CONFIG_SPI_BOOT) 186 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 187 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 188 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 189 #endif /* SPI support */ 190 191 #define CONFIG_MII 192 #define CONFIG_BOOTP_DEFAULT 193 #define CONFIG_BOOTP_DNS2 194 #define CONFIG_BOOTP_SEND_HOSTNAME 195 #define CONFIG_NET_RETRY_COUNT 10 196 197 /* NAND support */ 198 #ifdef CONFIG_NAND 199 /* UBI Support */ 200 201 /* Commen environment */ 202 #define CONFIG_PREBOOT 203 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 204 "setenv bootargs ${bootargs};" \ 205 "mtdparts default;" \ 206 "draco_led 1;" \ 207 "dfu 0 nand 0;" \ 208 "draco_led 0;\0" \ 209 210 #define COMMON_ENV_NAND_BOOT \ 211 "nand_boot=echo Booting from nand; " \ 212 "if test ${upgrade_available} -eq 1; then " \ 213 "if test ${bootcount} -gt ${bootlimit}; " \ 214 "then " \ 215 "setenv upgrade_available 0;" \ 216 "setenv ${partitionset_active} true;" \ 217 "if test -n ${A}; then " \ 218 "setenv partitionset_active B; " \ 219 "env delete A; " \ 220 "fi;" \ 221 "if test -n ${B}; then " \ 222 "setenv partitionset_active A; " \ 223 "env delete B; " \ 224 "fi;" \ 225 "saveenv; " \ 226 "fi;" \ 227 "fi;" \ 228 "echo set ${partitionset_active}...;" \ 229 "run nand_args; " 230 231 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 232 "flash_self_test=setenv testargs test; " \ 233 "run nand_boot\0" \ 234 "dfu_start=echo Preparing for dfu mode ...; " \ 235 "run dfu_args; \0" 236 237 #define COMMON_ENV_SETTINGS \ 238 "verify=no \0" \ 239 "project_dir=targetdir\0" \ 240 "upgrade_available=0\0" \ 241 "altbootcmd=run bootcmd\0" \ 242 "bootlimit=3\0" \ 243 "partitionset_active=A\0" \ 244 "loadaddr=0x82000000\0" \ 245 "kloadaddr=0x81000000\0" \ 246 "script_addr=0x81900000\0" \ 247 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 248 "nfsopts=nolock rw\0" \ 249 "ip_method=none\0" \ 250 "bootenv=uEnv.txt\0" \ 251 "bootargs_defaults=setenv bootargs " \ 252 "console=${console} " \ 253 "${testargs} " \ 254 "${optargs}\0" \ 255 "siemens_help=echo; "\ 256 "echo Type 'run flash_self' to use kernel and root " \ 257 "filesystem on memory; echo Type 'run flash_self_test' to " \ 258 "use kernel and root filesystem on memory, boot in test " \ 259 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 260 "from memory and root filesystem over NFS; echo Type " \ 261 "'run net_nfs' to get Kernel over TFTP and mount root " \ 262 "filesystem over NFS; " \ 263 "echo Set partitionset_active variable to 'A' " \ 264 "or 'B' to select kernel and rootfs partition; " \ 265 "echo" \ 266 "\0" 267 268 /* 269 * Variant 1 partition layout 270 * chip-size = 256MiB 271 *| name | size | address area | 272 *------------------------------------------------------- 273 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 274 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 275 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 276 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 277 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 278 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 279 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 280 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 281 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 282 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 283 *------------------------------------------------------- 284 285 "mtdparts=omap2-nand.0:" \ 286 "128k(spl)," \ 287 "128k(spl.backup1)," \ 288 "128k(spl.backup2)," \ 289 "128k(spl.backup3)," \ 290 "1920k(u-boot)," \ 291 "128k(uboot.env)," \ 292 "5120k(kernel_a)," \ 293 "5120k(kernel_b)," \ 294 "8192k(mtdoops)," \ 295 "-(rootfs)" 296 */ 297 298 #define DFU_ALT_INFO_NAND_V1 \ 299 "spl part 0 1;" \ 300 "spl.backup1 part 0 2;" \ 301 "spl.backup2 part 0 3;" \ 302 "spl.backup3 part 0 4;" \ 303 "u-boot part 0 5;" \ 304 "u-boot.env part 0 6;" \ 305 "kernel_a part 0 7;" \ 306 "kernel_b part 0 8;" \ 307 "rootfs partubi 0 10" 308 309 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 310 "nand_active_ubi_vol=rootfs_a\0" \ 311 "nand_active_ubi_vol_A=rootfs_a\0" \ 312 "nand_active_ubi_vol_B=rootfs_b\0" \ 313 "nand_root_fs_type=ubifs rootwait=1\0" \ 314 "nand_src_addr=0x280000\0" \ 315 "nand_src_addr_A=0x280000\0" \ 316 "nand_src_addr_B=0x780000\0" \ 317 "nand_args=run bootargs_defaults;" \ 318 "mtdparts default;" \ 319 "setenv ${partitionset_active} true;" \ 320 "if test -n ${A}; then " \ 321 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 322 "setenv nand_src_addr ${nand_src_addr_A};" \ 323 "fi;" \ 324 "if test -n ${B}; then " \ 325 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 326 "setenv nand_src_addr ${nand_src_addr_B};" \ 327 "fi;" \ 328 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 329 "ubi.mtd=9,${ubi_off};" \ 330 "setenv bootargs ${bootargs} " \ 331 "root=${nand_root} noinitrd ${mtdparts} " \ 332 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 333 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 334 "=mtdoops\0" \ 335 COMMON_ENV_DFU_ARGS \ 336 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 337 COMMON_ENV_NAND_BOOT \ 338 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 339 "${nand_img_size}; bootm ${kloadaddr}\0" \ 340 COMMON_ENV_NAND_CMDS 341 342 #define CONFIG_ENV_SETTINGS_V1 \ 343 COMMON_ENV_SETTINGS \ 344 "net_args=run bootargs_defaults;" \ 345 "mtdparts default;" \ 346 "setenv bootfile ${project_dir}/kernel/uImage;" \ 347 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 348 "setenv bootargs ${bootargs} " \ 349 "root=/dev/nfs ${mtdparts} " \ 350 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 351 "ip=${ipaddr}:${serverip}:" \ 352 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 353 "net_nfs=echo Booting from network ...; " \ 354 "run net_args; " \ 355 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 356 "bootm ${kloadaddr}\0" 357 358 /* 359 * Variant 2 partition layout (default) 360 * chip-size = 256MiB or 512 MiB 361 *| name | size | address area | 362 *------------------------------------------------------- 363 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 364 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 365 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 366 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 367 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 368 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 369 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 370 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 371 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 372 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 373 *------------------------------------------------------- 374 */ 375 376 #define DFU_ALT_INFO_NAND_V2 \ 377 "spl part 0 1;" \ 378 "spl.backup1 part 0 2;" \ 379 "spl.backup2 part 0 3;" \ 380 "spl.backup3 part 0 4;" \ 381 "u-boot part 0 5;" \ 382 "u-boot.env0 part 0 6;" \ 383 "u-boot.env1 part 0 7;" \ 384 "rootfs partubi 0 9" \ 385 386 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 387 "nand_active_ubi_vol=rootfs_a\0" \ 388 "rootfs_name=rootfs\0" \ 389 "kernel_name=uImage\0"\ 390 "nand_root_fs_type=ubifs rootwait=1\0" \ 391 "nand_args=run bootargs_defaults;" \ 392 "mtdparts default;" \ 393 "setenv ${partitionset_active} true;" \ 394 "if test -n ${A}; then " \ 395 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 396 "fi;" \ 397 "if test -n ${B}; then " \ 398 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 399 "fi;" \ 400 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 401 "ubi.mtd=rootfs,2048;" \ 402 "setenv bootargs ${bootargs} " \ 403 "root=${nand_root} noinitrd ${mtdparts} " \ 404 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 405 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 406 "=mtdoops\0" \ 407 COMMON_ENV_DFU_ARGS \ 408 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 409 COMMON_ENV_NAND_BOOT \ 410 "ubi part rootfs ${ubi_off};" \ 411 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 412 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 413 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 414 "bootm ${kloadaddr} - ${loadaddr}\0" \ 415 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 416 "bootm ${kloadaddr} - ${loadaddr}\0" \ 417 COMMON_ENV_NAND_CMDS 418 419 #define CONFIG_ENV_SETTINGS_V2 \ 420 COMMON_ENV_SETTINGS \ 421 "net_args=run bootargs_defaults;" \ 422 "mtdparts default;" \ 423 "setenv bootfile ${project_dir}/kernel/uImage;" \ 424 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 425 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 426 "setenv bootargs ${bootargs} " \ 427 "root=/dev/nfs ${mtdparts} " \ 428 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 429 "ip=${ipaddr}:${serverip}:" \ 430 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 431 "net_nfs=echo Booting from network ...; " \ 432 "run net_args; " \ 433 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 434 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 435 "bootm ${kloadaddr} - ${loadaddr}\0" 436 437 /* 438 * Variant 3 partition layout 439 * chip-size = 512MiB 440 *| name | size | address area | 441 *------------------------------------------------------- 442 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 443 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 444 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 445 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 446 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 447 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 448 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 449 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 450 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 451 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 452 *------------------------------------------------------- 453 454 "mtdparts=omap2-nand.0:" \ 455 "128k(spl)," \ 456 "128k(spl.backup1)," \ 457 "128k(spl.backup2)," \ 458 "128k(spl.backup3)," \ 459 "1920k(u-boot)," \ 460 "512k(u-boot.env0)," \ 461 "512k(u-boot.env1)," \ 462 "300m(rootfs)," \ 463 "512k(mtdoops)," \ 464 "-(configuration)" 465 466 */ 467 468 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 469 /* to access nand at */ 470 /* CS0 */ 471 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 472 devices */ 473 #if !defined(CONFIG_SPI_BOOT) 474 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 475 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 476 #endif 477 #endif 478 479 /* Reboot after 60 sec if bootcmd fails */ 480 #define CONFIG_RESET_TO_RETRY 481 #define CONFIG_BOOT_RETRY_TIME 60 482 483 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 484