1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #define CONFIG_AM33XX 18 19 #include <asm/arch/omap.h> 20 21 #define CONFIG_DMA_COHERENT 22 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 23 24 #define CONFIG_ENV_SIZE (0x2000) 25 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 26 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 27 #ifdef CONFIG_SIEMENS_MACH_TYPE 28 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 29 #endif 30 31 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 32 #define CONFIG_SETUP_MEMORY_TAGS 33 #define CONFIG_INITRD_TAG 34 35 /* commands to include */ 36 37 #define CONFIG_ENV_VARS_UBOOT_CONFIG 38 #ifndef CONFIG_SPL_BUILD 39 #define CONFIG_ROOTPATH "/opt/eldk" 40 #endif 41 42 #define CONFIG_ENV_OVERWRITE 1 43 #define CONFIG_ENV_IS_NOWHERE 44 45 #define CONFIG_SYS_LONGHELP 46 #define CONFIG_CMDLINE_EDITING 47 #define CONFIG_AUTO_COMPLETE 48 #define CONFIG_SYS_AUTOLOAD "yes" 49 50 /* Clock Defines */ 51 #define V_OSCK 24000000 /* Clock output from T2 */ 52 #define V_SCLK (V_OSCK) 53 54 /* We set the max number of command args high to avoid HUSH bugs. */ 55 #define CONFIG_SYS_MAXARGS 32 56 57 /* Console I/O Buffer Size */ 58 #define CONFIG_SYS_CBSIZE 1024 59 60 /* Print Buffer Size */ 61 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 62 + sizeof(CONFIG_SYS_PROMPT) + 16) 63 64 /* Boot Argument Buffer Size */ 65 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 66 67 /* 68 * memtest works on 8 MB in DRAM after skipping 32MB from 69 * start addr of ram disk 70 */ 71 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 72 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 73 + (8 * 1024 * 1024)) 74 75 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 76 77 #define CONFIG_SPI 78 #define CONFIG_OMAP3_SPI 79 #define CONFIG_MTD_DEVICE 80 #define CONFIG_SF_DEFAULT_SPEED (75000000) 81 82 /* Physical Memory Map */ 83 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 84 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 85 86 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 87 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 88 GENERATED_GBL_DATA_SIZE) 89 /* Platform/Board specific defs */ 90 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 91 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 92 93 /* NS16550 Configuration */ 94 #ifdef CONFIG_SPL_BUILD 95 #define CONFIG_SYS_NS16550_SERIAL 96 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 97 #endif 98 #define CONFIG_SYS_NS16550_CLK (48000000) 99 #define CONFIG_SYS_NS16550_COM1 0x44e09000 100 #define CONFIG_SYS_NS16550_COM4 0x481a6000 101 102 #define CONFIG_SERIAL1 1 103 #define CONFIG_CONS_INDEX 1 104 105 /* I2C Configuration */ 106 #define CONFIG_I2C 107 #define CONFIG_SYS_I2C 108 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 109 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 110 #define CONFIG_SYS_I2C_OMAP24XX 111 112 /* Defines for SPL */ 113 #define CONFIG_SPL_FRAMEWORK 114 #define CONFIG_SPL_TEXT_BASE 0x402F0400 115 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 116 CONFIG_SPL_TEXT_BASE) 117 118 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 119 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 120 121 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 122 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 123 124 #define CONFIG_SPL_SPI_LOAD 125 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 126 127 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 128 129 #define CONFIG_SPL_NAND_AM33XX_BCH 130 #define CONFIG_SPL_NAND_BASE 131 #define CONFIG_SPL_NAND_DRIVERS 132 #define CONFIG_SPL_NAND_ECC 133 #define CONFIG_SYS_NAND_ONFI_DETECTION 134 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 135 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 136 CONFIG_SYS_NAND_PAGE_SIZE) 137 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 138 #define CONFIG_SYS_NAND_OOBSIZE 64 139 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 140 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 141 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 142 10, 11, 12, 13, 14, 15, 16, 17, \ 143 18, 19, 20, 21, 22, 23, 24, 25, \ 144 26, 27, 28, 29, 30, 31, 32, 33, \ 145 34, 35, 36, 37, 38, 39, 40, 41, \ 146 42, 43, 44, 45, 46, 47, 48, 49, \ 147 50, 51, 52, 53, 54, 55, 56, 57, } 148 149 #define CONFIG_SYS_NAND_ECCSIZE 512 150 #define CONFIG_SYS_NAND_ECCBYTES 14 151 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 152 153 #define CONFIG_SYS_NAND_ECCSTEPS 4 154 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 155 CONFIG_SYS_NAND_ECCSTEPS) 156 157 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 158 159 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 160 161 /* 162 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 163 * 64 bytes before this address should be set aside for u-boot.img's 164 * header. That is 0x800FFFC0--0x80100000 should not be used for any 165 * other needs. 166 */ 167 #define CONFIG_SYS_TEXT_BASE 0x80100000 168 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 169 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 170 171 /* 172 * Since SPL did pll and ddr initialization for us, 173 * we don't need to do it twice. 174 */ 175 #ifndef CONFIG_SPL_BUILD 176 #define CONFIG_SKIP_LOWLEVEL_INIT 177 #endif 178 179 #ifndef CONFIG_SPL_BUILD 180 /* 181 * USB configuration 182 */ 183 #define CONFIG_USB_MUSB_DSPS 184 #define CONFIG_USB_MUSB_PIO_ONLY 185 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 186 #undef CONFIG_USB_GADGET_DUALSPEED 187 188 #define CONFIG_AM335X_USB0 189 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 190 #define CONFIG_AM335X_USB1 191 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 192 193 #ifdef CONFIG_USB_MUSB_GADGET 194 #define CONFIG_USB_ETHER 195 #define CONFIG_USB_ETH_RNDIS 196 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" 197 #endif /* CONFIG_USB_MUSB_GADGET */ 198 199 /* USB DRACO ID as default */ 200 #define CONFIG_USBD_HS 201 202 /* USB Device Firmware Update support */ 203 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 204 #define DFU_MANIFEST_POLL_TIMEOUT 25000 205 206 #endif /* CONFIG_SPL_BUILD */ 207 208 /* 209 * Default to using SPI for environment, etc. We have multiple copies 210 * of SPL as the ROM will check these locations. 211 * 0x0 - 0x20000 : First copy of SPL 212 * 0x20000 - 0x40000 : Second copy of SPL 213 * 0x40000 - 0x60000 : Third copy of SPL 214 * 0x60000 - 0x80000 : Fourth copy of SPL 215 * 0x80000 - 0xDF000 : U-Boot 216 * 0xDF000 - 0xE0000 : U-Boot Environment 217 * 0xE0000 - 0x442000 : Linux Kernel 218 * 0x442000 - 0x800000 : Userland 219 */ 220 #if defined(CONFIG_SPI_BOOT) 221 # undef CONFIG_ENV_IS_NOWHERE 222 # define CONFIG_ENV_IS_IN_SPI_FLASH 223 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 224 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 225 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 226 #endif /* SPI support */ 227 228 #define CONFIG_DRIVER_TI_CPSW 229 #define CONFIG_MII 230 #define CONFIG_PHY_GIGE 231 #define CONFIG_PHYLIB 232 #define CONFIG_BOOTP_DEFAULT 233 #define CONFIG_BOOTP_DNS 234 #define CONFIG_BOOTP_DNS2 235 #define CONFIG_BOOTP_SEND_HOSTNAME 236 #define CONFIG_BOOTP_GATEWAY 237 #define CONFIG_BOOTP_SUBNETMASK 238 #define CONFIG_NET_RETRY_COUNT 10 239 240 #define CONFIG_NAND 241 /* NAND support */ 242 #ifdef CONFIG_NAND 243 #define CONFIG_CMD_NAND 244 245 /* UBI Support */ 246 #ifndef CONFIG_SPL_BUILD 247 #define CONFIG_CMD_MTDPARTS 248 #define CONFIG_MTD_PARTITIONS 249 #define CONFIG_MTD_DEVICE 250 #define CONFIG_RBTREE 251 #define CONFIG_LZO 252 #define CONFIG_CMD_UBIFS 253 #endif 254 255 /* Commen environment */ 256 #define CONFIG_PREBOOT 257 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 258 "setenv bootargs ${bootargs};" \ 259 "mtdparts default;" \ 260 "draco_led 1;" \ 261 "dfu 0 nand 0;" \ 262 "draco_led 0;\0" \ 263 264 #define COMMON_ENV_NAND_BOOT \ 265 "nand_boot=echo Booting from nand; " \ 266 "if test ${upgrade_available} -eq 1; then " \ 267 "if test ${bootcount} -gt ${bootlimit}; " \ 268 "then " \ 269 "setenv upgrade_available 0;" \ 270 "setenv ${partitionset_active} true;" \ 271 "if test -n ${A}; then " \ 272 "setenv partitionset_active B; " \ 273 "env delete A; " \ 274 "fi;" \ 275 "if test -n ${B}; then " \ 276 "setenv partitionset_active A; " \ 277 "env delete B; " \ 278 "fi;" \ 279 "saveenv; " \ 280 "fi;" \ 281 "fi;" \ 282 "echo set ${partitionset_active}...;" \ 283 "run nand_args; " 284 285 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 286 "flash_self_test=setenv testargs test; " \ 287 "run nand_boot\0" \ 288 "dfu_start=echo Preparing for dfu mode ...; " \ 289 "run dfu_args; \0" 290 291 #define COMMON_ENV_SETTINGS \ 292 "verify=no \0" \ 293 "project_dir=targetdir\0" \ 294 "upgrade_available=0\0" \ 295 "altbootcmd=run bootcmd\0" \ 296 "bootlimit=3\0" \ 297 "partitionset_active=A\0" \ 298 "loadaddr=0x82000000\0" \ 299 "kloadaddr=0x81000000\0" \ 300 "script_addr=0x81900000\0" \ 301 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 302 "nfsopts=nolock rw\0" \ 303 "ip_method=none\0" \ 304 "bootenv=uEnv.txt\0" \ 305 "bootargs_defaults=setenv bootargs " \ 306 "console=${console} " \ 307 "${testargs} " \ 308 "${optargs}\0" \ 309 "siemens_help=echo; "\ 310 "echo Type 'run flash_self' to use kernel and root " \ 311 "filesystem on memory; echo Type 'run flash_self_test' to " \ 312 "use kernel and root filesystem on memory, boot in test " \ 313 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 314 "from memory and root filesystem over NFS; echo Type " \ 315 "'run net_nfs' to get Kernel over TFTP and mount root " \ 316 "filesystem over NFS; " \ 317 "echo Set partitionset_active variable to 'A' " \ 318 "or 'B' to select kernel and rootfs partition; " \ 319 "echo" \ 320 "\0" 321 322 /* 323 * Variant 1 partition layout 324 * chip-size = 256MiB 325 *| name | size | address area | 326 *------------------------------------------------------- 327 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 328 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 329 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 330 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 331 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 332 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 333 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 334 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 335 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 336 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 337 *------------------------------------------------------- 338 */ 339 #define MTDIDS_NAME_STR "omap2-nand.0" 340 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR 341 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ 342 "128k(spl)," \ 343 "128k(spl.backup1)," \ 344 "128k(spl.backup2)," \ 345 "128k(spl.backup3)," \ 346 "1920k(u-boot)," \ 347 "128k(uboot.env)," \ 348 "5120k(kernel_a)," \ 349 "5120k(kernel_b)," \ 350 "8192k(mtdoops)," \ 351 "-(rootfs)" 352 353 #define DFU_ALT_INFO_NAND_V1 \ 354 "spl part 0 1;" \ 355 "spl.backup1 part 0 2;" \ 356 "spl.backup2 part 0 3;" \ 357 "spl.backup3 part 0 4;" \ 358 "u-boot part 0 5;" \ 359 "u-boot.env part 0 6;" \ 360 "kernel_a part 0 7;" \ 361 "kernel_b part 0 8;" \ 362 "rootfs partubi 0 10" 363 364 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 365 "nand_active_ubi_vol=rootfs_a\0" \ 366 "nand_active_ubi_vol_A=rootfs_a\0" \ 367 "nand_active_ubi_vol_B=rootfs_b\0" \ 368 "nand_root_fs_type=ubifs rootwait=1\0" \ 369 "nand_src_addr=0x280000\0" \ 370 "nand_src_addr_A=0x280000\0" \ 371 "nand_src_addr_B=0x780000\0" \ 372 "nand_args=run bootargs_defaults;" \ 373 "mtdparts default;" \ 374 "setenv ${partitionset_active} true;" \ 375 "if test -n ${A}; then " \ 376 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 377 "setenv nand_src_addr ${nand_src_addr_A};" \ 378 "fi;" \ 379 "if test -n ${B}; then " \ 380 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 381 "setenv nand_src_addr ${nand_src_addr_B};" \ 382 "fi;" \ 383 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 384 "ubi.mtd=9,${ubi_off};" \ 385 "setenv bootargs ${bootargs} " \ 386 "root=${nand_root} noinitrd ${mtdparts} " \ 387 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 388 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 389 "=mtdoops\0" \ 390 COMMON_ENV_DFU_ARGS \ 391 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 392 COMMON_ENV_NAND_BOOT \ 393 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 394 "${nand_img_size}; bootm ${kloadaddr}\0" \ 395 COMMON_ENV_NAND_CMDS 396 397 #define CONFIG_ENV_SETTINGS_V1 \ 398 COMMON_ENV_SETTINGS \ 399 "net_args=run bootargs_defaults;" \ 400 "mtdparts default;" \ 401 "setenv bootfile ${project_dir}/kernel/uImage;" \ 402 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 403 "setenv bootargs ${bootargs} " \ 404 "root=/dev/nfs ${mtdparts} " \ 405 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 406 "ip=${ipaddr}:${serverip}:" \ 407 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 408 "net_nfs=echo Booting from network ...; " \ 409 "run net_args; " \ 410 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 411 "bootm ${kloadaddr}\0" 412 413 /* 414 * Variant 2 partition layout 415 * chip-size = 256MiB or 512 MiB 416 *| name | size | address area | 417 *------------------------------------------------------- 418 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 419 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 420 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 421 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 422 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 423 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 424 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 425 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 426 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 427 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 428 *------------------------------------------------------- 429 */ 430 431 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ 432 "128k(spl)," \ 433 "128k(spl.backup1)," \ 434 "128k(spl.backup2)," \ 435 "128k(spl.backup3)," \ 436 "1920k(u-boot)," \ 437 "512k(u-boot.env0)," \ 438 "512k(u-boot.env1)," \ 439 "512k(mtdoops)," \ 440 "-(rootfs)" 441 442 #define DFU_ALT_INFO_NAND_V2 \ 443 "spl part 0 1;" \ 444 "spl.backup1 part 0 2;" \ 445 "spl.backup2 part 0 3;" \ 446 "spl.backup3 part 0 4;" \ 447 "u-boot part 0 5;" \ 448 "u-boot.env0 part 0 6;" \ 449 "u-boot.env1 part 0 7;" \ 450 "rootfs partubi 0 9" \ 451 452 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 453 "nand_active_ubi_vol=rootfs_a\0" \ 454 "rootfs_name=rootfs\0" \ 455 "kernel_name=uImage\0"\ 456 "nand_root_fs_type=ubifs rootwait=1\0" \ 457 "nand_args=run bootargs_defaults;" \ 458 "mtdparts default;" \ 459 "setenv ${partitionset_active} true;" \ 460 "if test -n ${A}; then " \ 461 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 462 "fi;" \ 463 "if test -n ${B}; then " \ 464 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 465 "fi;" \ 466 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 467 "ubi.mtd=rootfs,2048;" \ 468 "setenv bootargs ${bootargs} " \ 469 "root=${nand_root} noinitrd ${mtdparts} " \ 470 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 471 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 472 "=mtdoops\0" \ 473 COMMON_ENV_DFU_ARGS \ 474 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 475 COMMON_ENV_NAND_BOOT \ 476 "ubi part rootfs ${ubi_off};" \ 477 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 478 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 479 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 480 "bootm ${kloadaddr} - ${loadaddr}\0" \ 481 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 482 "bootm ${kloadaddr} - ${loadaddr}\0" \ 483 COMMON_ENV_NAND_CMDS 484 485 #define CONFIG_ENV_SETTINGS_V2 \ 486 COMMON_ENV_SETTINGS \ 487 "net_args=run bootargs_defaults;" \ 488 "mtdparts default;" \ 489 "setenv bootfile ${project_dir}/kernel/uImage;" \ 490 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 491 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 492 "setenv bootargs ${bootargs} " \ 493 "root=/dev/nfs ${mtdparts} " \ 494 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 495 "ip=${ipaddr}:${serverip}:" \ 496 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 497 "net_nfs=echo Booting from network ...; " \ 498 "run net_args; " \ 499 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 500 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 501 "bootm ${kloadaddr} - ${loadaddr}\0" 502 503 /* 504 * Variant 3 partition layout 505 * chip-size = 512MiB 506 *| name | size | address area | 507 *------------------------------------------------------- 508 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 509 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 510 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 511 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 512 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 513 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 514 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 515 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 516 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 517 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 518 *------------------------------------------------------- 519 */ 520 521 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ 522 "128k(spl)," \ 523 "128k(spl.backup1)," \ 524 "128k(spl.backup2)," \ 525 "128k(spl.backup3)," \ 526 "1920k(u-boot)," \ 527 "512k(u-boot.env0)," \ 528 "512k(u-boot.env1)," \ 529 "300m(rootfs)," \ 530 "512k(mtdoops)," \ 531 "-(configuration)" 532 533 #define CONFIG_NAND_OMAP_GPMC 534 #define CONFIG_NAND_OMAP_ELM 535 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 536 /* to access nand at */ 537 /* CS0 */ 538 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 539 devices */ 540 #if !defined(CONFIG_SPI_BOOT) 541 #undef CONFIG_ENV_IS_NOWHERE 542 #define CONFIG_ENV_IS_IN_NAND 543 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 544 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 545 #endif 546 #endif 547 548 /* Reboot after 60 sec if bootcmd fails */ 549 #define CONFIG_RESET_TO_RETRY 550 #define CONFIG_BOOT_RETRY_TIME 60 551 552 #define CONFIG_BOOTCOUNT_LIMIT 553 #define CONFIG_BOOTCOUNT_ENV 554 555 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 556