1 /*
2  * siemens am33x common board options
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:	GPL-2.0+
12  */
13 
14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
15 #define __CONFIG_SIEMENS_AM33X_COMMON_H
16 
17 #define CONFIG_AM33XX
18 #define CONFIG_OMAP
19 #define CONFIG_OMAP_COMMON
20 
21 #include <asm/arch/omap.h>
22 
23 #define CONFIG_DMA_COHERENT
24 #define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
25 
26 #define CONFIG_ENV_SIZE			(0x2000)
27 #define CONFIG_SYS_MALLOC_LEN		(16 * 1024 * 1024)
28 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
29 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
30 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
31 #define CONFIG_BOARD_LATE_INIT
32 #define CONFIG_SYS_NO_FLASH
33 #ifdef CONFIG_SIEMENS_MACH_TYPE
34 #define CONFIG_MACH_TYPE		CONFIG_SIEMENS_MACH_TYPE
35 #endif
36 
37 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
38 #define CONFIG_SETUP_MEMORY_TAGS
39 #define CONFIG_INITRD_TAG
40 
41 #define CONFIG_SYS_CACHELINE_SIZE       64
42 
43 /* commands to include */
44 #define CONFIG_CMD_ASKENV
45 #define CONFIG_CMD_CACHE
46 #define CONFIG_CMD_TIME
47 
48 
49 #define CONFIG_ENV_VARS_UBOOT_CONFIG
50 #ifndef CONFIG_SPL_BUILD
51 #define CONFIG_ROOTPATH		"/opt/eldk"
52 #endif
53 
54 #define CONFIG_ENV_OVERWRITE		1
55 #define CONFIG_ENV_IS_NOWHERE
56 
57 #define CONFIG_SYS_LONGHELP
58 #define CONFIG_CMDLINE_EDITING
59 #define CONFIG_AUTO_COMPLETE
60 #define CONFIG_SYS_AUTOLOAD	"yes"
61 
62 /* Clock Defines */
63 #define V_OSCK				24000000  /* Clock output from T2 */
64 #define V_SCLK				(V_OSCK)
65 
66 /* We set the max number of command args high to avoid HUSH bugs. */
67 #define CONFIG_SYS_MAXARGS		32
68 
69 /* Console I/O Buffer Size */
70 #define CONFIG_SYS_CBSIZE		1024
71 
72 /* Print Buffer Size */
73 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
74 					+ sizeof(CONFIG_SYS_PROMPT) + 16)
75 
76 /* Boot Argument Buffer Size */
77 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
78 
79 /*
80  * memtest works on 8 MB in DRAM after skipping 32MB from
81  * start addr of ram disk
82  */
83 #define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64 * 1024 * 1024))
84 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
85 					+ (8 * 1024 * 1024))
86 
87 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
88 
89 #define CONFIG_MMC
90 #define CONFIG_GENERIC_MMC
91 #define CONFIG_OMAP_HSMMC
92 #define CONFIG_CMD_MMC
93 #define CONFIG_DOS_PARTITION
94 #define CONFIG_CMD_FAT
95 #define CONFIG_CMD_EXT2
96 
97 #define CONFIG_SPI
98 #define CONFIG_OMAP3_SPI
99 #define CONFIG_MTD_DEVICE
100 #define CONFIG_CMD_SF
101 #define CONFIG_SF_DEFAULT_SPEED		(75000000)
102 
103  /* Physical Memory Map */
104 #define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
105 #define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
106 
107 #define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
108 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
109 						GENERATED_GBL_DATA_SIZE)
110  /* Platform/Board specific defs */
111 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
112 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
113 
114 /* NS16550 Configuration */
115 #define CONFIG_SYS_NS16550_SERIAL
116 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
117 #define CONFIG_SYS_NS16550_CLK		(48000000)
118 #define CONFIG_SYS_NS16550_COM1		0x44e09000
119 #define CONFIG_SYS_NS16550_COM4		0x481a6000
120 
121 #define CONFIG_BAUDRATE		115200
122 
123 #define CONFIG_SYS_CONSOLE_INFO_QUIET
124 #define CONFIG_SERIAL1                  1
125 #define CONFIG_CONS_INDEX               1
126 
127 /* I2C Configuration */
128 #define CONFIG_I2C
129 #define CONFIG_CMD_I2C
130 #define CONFIG_SYS_I2C
131 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
132 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
133 #define CONFIG_SYS_I2C_OMAP24XX
134 
135 /* Defines for SPL */
136 #define CONFIG_SPL_FRAMEWORK
137 #define CONFIG_SPL_TEXT_BASE		0x402F0400
138 #define CONFIG_SPL_MAX_SIZE		(101 * 1024)
139 
140 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
141 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
142 
143 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
144 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
145 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
146 #define CONFIG_SPL_MMC_SUPPORT
147 #define CONFIG_SPL_FAT_SUPPORT
148 #define CONFIG_FS_FAT
149 #define CONFIG_SPL_I2C_SUPPORT
150 
151 #define CONFIG_SPL_LIBCOMMON_SUPPORT
152 #define CONFIG_SPL_LIBDISK_SUPPORT
153 #define CONFIG_SPL_LIBGENERIC_SUPPORT
154 #define CONFIG_SPL_SERIAL_SUPPORT
155 #define CONFIG_SPL_YMODEM_SUPPORT
156 
157 #define CONFIG_SPL_GPIO_SUPPORT
158 #define CONFIG_SPL_WATCHDOG_SUPPORT
159 
160 #define CONFIG_SPL_SPI_SUPPORT
161 #define CONFIG_SPL_SPI_FLASH_SUPPORT
162 #define CONFIG_SPL_SPI_LOAD
163 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
164 
165 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
166 
167 #define CONFIG_SPL_BOARD_INIT
168 #define CONFIG_SPL_NAND_AM33XX_BCH
169 #define CONFIG_SPL_NAND_SUPPORT
170 #define CONFIG_SPL_NAND_BASE
171 #define CONFIG_SPL_NAND_DRIVERS
172 #define CONFIG_SPL_NAND_ECC
173 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
174 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
175 					 CONFIG_SYS_NAND_PAGE_SIZE)
176 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
177 #define CONFIG_SYS_NAND_OOBSIZE		64
178 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
179 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
180 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
181 					 10, 11, 12, 13, 14, 15, 16, 17, \
182 					 18, 19, 20, 21, 22, 23, 24, 25, \
183 					 26, 27, 28, 29, 30, 31, 32, 33, \
184 					 34, 35, 36, 37, 38, 39, 40, 41, \
185 					 42, 43, 44, 45, 46, 47, 48, 49, \
186 					 50, 51, 52, 53, 54, 55, 56, 57, }
187 
188 #define CONFIG_SYS_NAND_ECCSIZE		512
189 #define CONFIG_SYS_NAND_ECCBYTES	14
190 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
191 
192 #define CONFIG_SYS_NAND_ECCSTEPS	4
193 #define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
194 						CONFIG_SYS_NAND_ECCSTEPS)
195 
196 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
197 
198 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
199 
200 /*
201  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
202  * 64 bytes before this address should be set aside for u-boot.img's
203  * header. That is 0x800FFFC0--0x80100000 should not be used for any
204  * other needs.
205  */
206 #define CONFIG_SYS_TEXT_BASE		0x80100000
207 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
208 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
209 
210 /*
211  * Since SPL did pll and ddr initialization for us,
212  * we don't need to do it twice.
213  */
214 #ifndef CONFIG_SPL_BUILD
215 #define CONFIG_SKIP_LOWLEVEL_INIT
216 #endif
217 
218 #ifndef CONFIG_SPL_BUILD
219 /*
220  * USB configuration
221  */
222 #define CONFIG_USB_MUSB_DSPS
223 #define CONFIG_ARCH_MISC_INIT
224 #define CONFIG_USB_MUSB_GADGET
225 #define CONFIG_USB_MUSB_PIO_ONLY
226 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
227 #undef CONFIG_USB_GADGET_DUALSPEED
228 #define CONFIG_USB_GADGET_VBUS_DRAW	2
229 #define CONFIG_USB_MUSB_HOST
230 
231 #define CONFIG_AM335X_USB0
232 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
233 #define CONFIG_AM335X_USB1
234 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
235 #ifdef CONFIG_USB_MUSB_HOST
236 #define CONFIG_CMD_USB
237 #define CONFIG_USB_STORAGE
238 #endif
239 
240 #ifdef CONFIG_USB_MUSB_GADGET
241 #define CONFIG_USB_ETHER
242 #define CONFIG_USB_ETH_RNDIS
243 #define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
244 #endif /* CONFIG_USB_MUSB_GADGET */
245 
246 #define CONFIG_USB_GADGET_DOWNLOAD
247 
248 /* USB DRACO ID as default */
249 #define CONFIG_USBD_HS
250 #define CONFIG_G_DNL_VENDOR_NUM 0x0908
251 #define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
252 #define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
253 
254 /* USB Device Firmware Update support */
255 #define CONFIG_USB_FUNCTION_DFU
256 #define CONFIG_DFU_NAND
257 #define CONFIG_CMD_DFU
258 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)
259 #define DFU_MANIFEST_POLL_TIMEOUT	25000
260 
261 #endif /* CONFIG_SPL_BUILD */
262 
263 /*
264  * Default to using SPI for environment, etc.  We have multiple copies
265  * of SPL as the ROM will check these locations.
266  * 0x0 - 0x20000 : First copy of SPL
267  * 0x20000 - 0x40000 : Second copy of SPL
268  * 0x40000 - 0x60000 : Third copy of SPL
269  * 0x60000 - 0x80000 : Fourth copy of SPL
270  * 0x80000 - 0xDF000 : U-Boot
271  * 0xDF000 - 0xE0000 : U-Boot Environment
272  * 0xE0000 - 0x442000 : Linux Kernel
273  * 0x442000 - 0x800000 : Userland
274  */
275 #if defined(CONFIG_SPI_BOOT)
276 # undef CONFIG_ENV_IS_NOWHERE
277 # define CONFIG_ENV_IS_IN_SPI_FLASH
278 # define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
279 # define CONFIG_ENV_OFFSET		(892 << 10) /* 892 KiB in */
280 # define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
281 #endif /* SPI support */
282 
283 /* Unsupported features */
284 #undef CONFIG_USE_IRQ
285 
286 #define CONFIG_CMD_DHCP
287 #define CONFIG_CMD_PING
288 #define CONFIG_DRIVER_TI_CPSW
289 #define CONFIG_MII
290 #define CONFIG_PHY_GIGE
291 #define CONFIG_PHYLIB
292 #define CONFIG_CMD_MII
293 #define CONFIG_BOOTP_DEFAULT
294 #define CONFIG_BOOTP_DNS
295 #define CONFIG_BOOTP_DNS2
296 #define CONFIG_BOOTP_SEND_HOSTNAME
297 #define CONFIG_BOOTP_GATEWAY
298 #define CONFIG_BOOTP_SUBNETMASK
299 #define CONFIG_NET_RETRY_COUNT         10
300 
301 #define CONFIG_NAND
302 /* NAND support */
303 #ifdef CONFIG_NAND
304 #define CONFIG_CMD_NAND
305 
306 /* UBI Support */
307 #ifndef CONFIG_SPL_BUILD
308 #define CONFIG_CMD_MTDPARTS
309 #define CONFIG_MTD_PARTITIONS
310 #define CONFIG_MTD_DEVICE
311 #define CONFIG_RBTREE
312 #define CONFIG_LZO
313 #define CONFIG_CMD_UBI
314 #define CONFIG_CMD_UBIFS
315 #endif
316 
317 /* Commen environment */
318 #define CONFIG_PREBOOT
319 #define COMMON_ENV_DFU_ARGS	"dfu_args=run bootargs_defaults;" \
320 				"setenv bootargs ${bootargs};" \
321 				"mtdparts default;" \
322 				"draco_led 1;" \
323 				"dfu 0 nand 0;" \
324 				"draco_led 0;\0" \
325 
326 #define COMMON_ENV_NAND_BOOT \
327 		"nand_boot=echo Booting from nand; " \
328 		"if test ${upgrade_available} -eq 1; then " \
329 			"if test ${bootcount} -gt ${bootlimit}; " \
330 				"then " \
331 				"setenv upgrade_available 0;" \
332 				"setenv ${partitionset_active} true;" \
333 				"if test -n ${A}; then " \
334 					"setenv partitionset_active B; " \
335 					"env delete A; " \
336 				"fi;" \
337 				"if test -n ${B}; then " \
338 					"setenv partitionset_active A; " \
339 					"env delete B; " \
340 				"fi;" \
341 				"saveenv; " \
342 			"fi;" \
343 		"fi;" \
344 		"echo set ${partitionset_active}...;" \
345 		"run nand_args; "
346 
347 #define COMMON_ENV_NAND_CMDS	"flash_self=run nand_boot\0" \
348 				"flash_self_test=setenv testargs test; " \
349 					"run nand_boot\0" \
350 				"dfu_start=echo Preparing for dfu mode ...; " \
351 				"run dfu_args; \0"
352 
353 #define COMMON_ENV_SETTINGS \
354 	"verify=no \0" \
355 	"project_dir=targetdir\0" \
356 	"upgrade_available=0\0" \
357 	"altbootcmd=run bootcmd\0" \
358 	"bootlimit=3\0" \
359 	"partitionset_active=A\0" \
360 	"loadaddr=0x82000000\0" \
361 	"kloadaddr=0x81000000\0" \
362 	"script_addr=0x81900000\0" \
363 	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
364 	"nfsopts=nolock rw\0" \
365 	"ip_method=none\0" \
366 	"bootenv=uEnv.txt\0" \
367 	"bootargs_defaults=setenv bootargs " \
368 		"console=${console} " \
369 		"${testargs} " \
370 		"${optargs}\0" \
371 	"siemens_help=echo; "\
372 		"echo Type 'run flash_self' to use kernel and root " \
373 		"filesystem on memory; echo Type 'run flash_self_test' to " \
374 		"use kernel and root filesystem on memory, boot in test " \
375 		"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
376 		"from memory and root filesystem over NFS; echo Type " \
377 		"'run net_nfs' to get Kernel over TFTP and mount root " \
378 		"filesystem over NFS; " \
379 		"echo Set partitionset_active variable to 'A' " \
380 		"or 'B' to select kernel and rootfs partition; " \
381 		"echo" \
382 		"\0"
383 
384 /*
385  * Variant 1 partition layout
386  * chip-size = 256MiB
387  *|         name |        size |           address area |
388  *-------------------------------------------------------
389  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
390  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
391  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
392  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
393  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
394  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
395  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
396  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
397  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
398  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
399  *-------------------------------------------------------
400  */
401 #define MTDIDS_NAME_STR		"omap2-nand.0"
402 #define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
403 #define MTDPARTS_DEFAULT_V1	"mtdparts=" MTDIDS_NAME_STR ":" \
404 					"128k(spl),"		\
405 					"128k(spl.backup1),"	\
406 					"128k(spl.backup2),"	\
407 					"128k(spl.backup3),"	\
408 					"1920k(u-boot),"	\
409 					"128k(uboot.env),"	\
410 					"5120k(kernel_a),"	\
411 					"5120k(kernel_b),"	\
412 					"8192k(mtdoops),"	\
413 					"-(rootfs)"
414 
415 #define DFU_ALT_INFO_NAND_V1 \
416 	"spl part 0 1;" \
417 	"spl.backup1 part 0 2;" \
418 	"spl.backup2 part 0 3;" \
419 	"spl.backup3 part 0 4;" \
420 	"u-boot part 0 5;" \
421 	"u-boot.env part 0 6;" \
422 	"kernel_a part 0 7;" \
423 	"kernel_b part 0 8;" \
424 	"rootfs partubi 0 10"
425 
426 #define CONFIG_ENV_SETTINGS_NAND_V1 \
427 	"nand_active_ubi_vol=rootfs_a\0" \
428 	"nand_active_ubi_vol_A=rootfs_a\0" \
429 	"nand_active_ubi_vol_B=rootfs_b\0" \
430 	"nand_root_fs_type=ubifs rootwait=1\0" \
431 	"nand_src_addr=0x280000\0" \
432 	"nand_src_addr_A=0x280000\0" \
433 	"nand_src_addr_B=0x780000\0" \
434 	"nand_args=run bootargs_defaults;" \
435 		"mtdparts default;" \
436 		"setenv ${partitionset_active} true;" \
437 		"if test -n ${A}; then " \
438 			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
439 			"setenv nand_src_addr ${nand_src_addr_A};" \
440 		"fi;" \
441 		"if test -n ${B}; then " \
442 			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
443 			"setenv nand_src_addr ${nand_src_addr_B};" \
444 		"fi;" \
445 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
446 		"ubi.mtd=9,2048;" \
447 		"setenv bootargs ${bootargs} " \
448 		"root=${nand_root} noinitrd ${mtdparts} " \
449 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
450 		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
451 		"=mtdoops\0" \
452 	COMMON_ENV_DFU_ARGS \
453 		"dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
454 	COMMON_ENV_NAND_BOOT \
455 		"nand read.i ${kloadaddr} ${nand_src_addr} " \
456 		"${nand_img_size}; bootm ${kloadaddr}\0" \
457 	COMMON_ENV_NAND_CMDS
458 
459 #define CONFIG_ENV_SETTINGS_V1 \
460 		COMMON_ENV_SETTINGS \
461 	"net_args=run bootargs_defaults;" \
462 		"mtdparts default;" \
463 		"setenv bootfile ${project_dir}/kernel/uImage;" \
464 		"setenv rootpath /home/projects/${project_dir}/rootfs;" \
465 		"setenv bootargs ${bootargs} " \
466 		"root=/dev/nfs ${mtdparts} " \
467 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
468 		"ip=${ipaddr}:${serverip}:" \
469 		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
470 	"net_nfs=echo Booting from network ...; " \
471 		"run net_args; " \
472 		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
473 		"bootm ${kloadaddr}\0"
474 
475 /*
476  * Variant 2 partition layout
477  * chip-size = 256MiB or 512 MiB
478  *|         name |        size |           address area |
479  *-------------------------------------------------------
480  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
481  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
482  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
483  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
484  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
485  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
486  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
487  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
488  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
489  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
490  *-------------------------------------------------------
491  */
492 
493 #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
494 					"128k(spl)," \
495 					"128k(spl.backup1)," \
496 					"128k(spl.backup2)," \
497 					"128k(spl.backup3)," \
498 					"1920k(u-boot)," \
499 					"512k(u-boot.env0)," \
500 					"512k(u-boot.env1)," \
501 					"512k(mtdoops)," \
502 					"-(rootfs)"
503 
504 
505 #define DFU_ALT_INFO_NAND_V2 \
506 	"spl part 0 1;" \
507 	"spl.backup1 part 0 2;" \
508 	"spl.backup2 part 0 3;" \
509 	"spl.backup3 part 0 4;" \
510 	"u-boot part 0 5;" \
511 	"u-boot.env0 part 0 6;" \
512 	"u-boot.env1 part 0 7;" \
513 	"rootfs partubi 0 9" \
514 
515 #define CONFIG_ENV_SETTINGS_NAND_V2 \
516 	"nand_active_ubi_vol=rootfs_a\0" \
517 	"rootfs_name=rootfs\0" \
518 	"kernel_name=uImage\0"\
519 	"nand_root_fs_type=ubifs rootwait=1\0" \
520 	"nand_args=run bootargs_defaults;" \
521 		"mtdparts default;" \
522 		"setenv ${partitionset_active} true;" \
523 		"if test -n ${A}; then " \
524 			"setenv nand_active_ubi_vol ${rootfs_name}_a;" \
525 		"fi;" \
526 		"if test -n ${B}; then " \
527 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
528 		"fi;" \
529 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
530 		"ubi.mtd=rootfs,2048;" \
531 		"setenv bootargs ${bootargs} " \
532 		"root=${nand_root} noinitrd ${mtdparts} " \
533 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
534 		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
535 		"=mtdoops\0" \
536 	COMMON_ENV_DFU_ARGS \
537 		"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
538 	COMMON_ENV_NAND_BOOT \
539 		"ubi part rootfs 2048;" \
540 		"ubifsmount ubi0:${nand_active_ubi_vol};" \
541 		"ubifsload ${kloadaddr} boot/${kernel_name};" \
542 		"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
543 		"bootm ${kloadaddr} - ${loadaddr}\0" \
544 	"nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
545 		"bootm ${kloadaddr} - ${loadaddr}\0" \
546 	COMMON_ENV_NAND_CMDS
547 
548 #define CONFIG_ENV_SETTINGS_V2 \
549 		COMMON_ENV_SETTINGS \
550 	"net_args=run bootargs_defaults;" \
551 		"mtdparts default;" \
552 		"setenv bootfile ${project_dir}/kernel/uImage;" \
553 		"setenv bootdtb ${project_dir}/kernel/dtb;" \
554 		"setenv rootpath /home/projects/${project_dir}/rootfs;" \
555 		"setenv bootargs ${bootargs} " \
556 		"root=/dev/nfs ${mtdparts} " \
557 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
558 		"ip=${ipaddr}:${serverip}:" \
559 		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
560 	"net_nfs=echo Booting from network ...; " \
561 		"run net_args; " \
562 		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
563 		"tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
564 		"bootm ${kloadaddr} - ${loadaddr}\0"
565 
566 /*
567  * Variant 3 partition layout
568  * chip-size = 512MiB
569  *|         name |        size |           address area |
570  *-------------------------------------------------------
571  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
572  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
573  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
574  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
575  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
576  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
577  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
578  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
579  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
580  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
581  *-------------------------------------------------------
582  */
583 
584 #define MTDPARTS_DEFAULT_V3	"mtdparts=" MTDIDS_NAME_STR ":" \
585 					"128k(spl),"		\
586 					"128k(spl.backup1),"	\
587 					"128k(spl.backup2),"	\
588 					"128k(spl.backup3),"	\
589 					"1920k(u-boot),"	\
590 					"512k(u-boot.env0),"	\
591 					"512k(u-boot.env1),"	\
592 					"300m(rootfs),"		\
593 					"512k(mtdoops),"	\
594 					"-(configuration)"
595 
596 
597 #define CONFIG_NAND_OMAP_GPMC
598 #define CONFIG_NAND_OMAP_ELM
599 #define CONFIG_SYS_NAND_BASE		(0x08000000)	/* physical address */
600 							/* to access nand at */
601 							/* CS0 */
602 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND
603 							   devices */
604 #if !defined(CONFIG_SPI_BOOT)
605 #undef CONFIG_ENV_IS_NOWHERE
606 #define CONFIG_ENV_IS_IN_NAND
607 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
608 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
609 #endif
610 #endif
611 
612 #define CONFIG_OMAP_GPIO
613 
614 /* Gpio cmd support */
615 
616 /* Watchdog */
617 #define CONFIG_HW_WATCHDOG
618 
619 /* Reboot after 60 sec if bootcmd fails */
620 #define CONFIG_RESET_TO_RETRY
621 #define CONFIG_BOOT_RETRY_TIME 60
622 
623 #define CONFIG_BOOTCOUNT_LIMIT
624 #define CONFIG_BOOTCOUNT_ENV
625 
626 /* Enable Device-Tree (FDT) support */
627 #define CONFIG_CMD_FDT
628 
629 #endif	/* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
630