1 /* 2 * siemens am33x common board options 3 * (C) Copyright 2013 Siemens Schweiz AG 4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * U-Boot file:/include/configs/am335x_evm.h 8 * 9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H 15 #define __CONFIG_SIEMENS_AM33X_COMMON_H 16 17 #define CONFIG_AM33XX 18 #define CONFIG_OMAP 19 #define CONFIG_OMAP_COMMON 20 21 #include <asm/arch/omap.h> 22 23 #define CONFIG_DMA_COHERENT 24 #define CONFIG_DMA_COHERENT_SIZE (1 << 20) 25 26 #define CONFIG_ENV_SIZE (0x2000) 27 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) 28 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 29 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 30 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 31 #define CONFIG_BOARD_LATE_INIT 32 #define CONFIG_SYS_NO_FLASH 33 #ifdef CONFIG_SIEMENS_MACH_TYPE 34 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE 35 #endif 36 37 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 38 #define CONFIG_SETUP_MEMORY_TAGS 39 #define CONFIG_INITRD_TAG 40 41 #define CONFIG_SYS_CACHELINE_SIZE 64 42 43 /* commands to include */ 44 #define CONFIG_CMD_ASKENV 45 #define CONFIG_CMD_CACHE 46 #define CONFIG_CMD_TIME 47 48 49 #define CONFIG_ENV_VARS_UBOOT_CONFIG 50 #ifndef CONFIG_SPL_BUILD 51 #define CONFIG_ROOTPATH "/opt/eldk" 52 #endif 53 54 #define CONFIG_ENV_OVERWRITE 1 55 #define CONFIG_ENV_IS_NOWHERE 56 57 #define CONFIG_SYS_LONGHELP 58 #define CONFIG_CMDLINE_EDITING 59 #define CONFIG_AUTO_COMPLETE 60 #define CONFIG_SYS_AUTOLOAD "yes" 61 62 /* Clock Defines */ 63 #define V_OSCK 24000000 /* Clock output from T2 */ 64 #define V_SCLK (V_OSCK) 65 66 /* We set the max number of command args high to avoid HUSH bugs. */ 67 #define CONFIG_SYS_MAXARGS 32 68 69 /* Console I/O Buffer Size */ 70 #define CONFIG_SYS_CBSIZE 1024 71 72 /* Print Buffer Size */ 73 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 74 + sizeof(CONFIG_SYS_PROMPT) + 16) 75 76 /* Boot Argument Buffer Size */ 77 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 78 79 /* 80 * memtest works on 8 MB in DRAM after skipping 32MB from 81 * start addr of ram disk 82 */ 83 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) 84 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ 85 + (8 * 1024 * 1024)) 86 87 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ 88 89 #define CONFIG_MMC 90 #define CONFIG_GENERIC_MMC 91 #define CONFIG_OMAP_HSMMC 92 #define CONFIG_CMD_MMC 93 #define CONFIG_DOS_PARTITION 94 #define CONFIG_CMD_FAT 95 #define CONFIG_CMD_EXT2 96 97 #define CONFIG_SPI 98 #define CONFIG_OMAP3_SPI 99 #define CONFIG_MTD_DEVICE 100 #define CONFIG_CMD_SF 101 #define CONFIG_SF_DEFAULT_SPEED (75000000) 102 103 /* Physical Memory Map */ 104 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 105 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ 106 107 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 108 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ 109 GENERATED_GBL_DATA_SIZE) 110 /* Platform/Board specific defs */ 111 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 112 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 113 114 /* NS16550 Configuration */ 115 #define CONFIG_SYS_NS16550_SERIAL 116 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 117 #define CONFIG_SYS_NS16550_CLK (48000000) 118 #define CONFIG_SYS_NS16550_COM1 0x44e09000 119 #define CONFIG_SYS_NS16550_COM4 0x481a6000 120 121 #define CONFIG_BAUDRATE 115200 122 123 #define CONFIG_SYS_CONSOLE_INFO_QUIET 124 #define CONFIG_SERIAL1 1 125 #define CONFIG_CONS_INDEX 1 126 127 /* I2C Configuration */ 128 #define CONFIG_I2C 129 #define CONFIG_CMD_I2C 130 #define CONFIG_SYS_I2C 131 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 132 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 133 #define CONFIG_SYS_I2C_OMAP24XX 134 135 /* Defines for SPL */ 136 #define CONFIG_SPL_FRAMEWORK 137 #define CONFIG_SPL_TEXT_BASE 0x402F0400 138 #define CONFIG_SPL_MAX_SIZE (101 * 1024) 139 140 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 141 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 142 143 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 144 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 145 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 146 #define CONFIG_SPL_MMC_SUPPORT 147 #define CONFIG_SPL_FAT_SUPPORT 148 #define CONFIG_FS_FAT 149 #define CONFIG_SPL_I2C_SUPPORT 150 151 #define CONFIG_SPL_LIBCOMMON_SUPPORT 152 #define CONFIG_SPL_LIBDISK_SUPPORT 153 #define CONFIG_SPL_LIBGENERIC_SUPPORT 154 #define CONFIG_SPL_SERIAL_SUPPORT 155 #define CONFIG_SPL_YMODEM_SUPPORT 156 157 #define CONFIG_SPL_GPIO_SUPPORT 158 #define CONFIG_SPL_WATCHDOG_SUPPORT 159 160 #define CONFIG_SPL_SPI_SUPPORT 161 #define CONFIG_SPL_SPI_FLASH_SUPPORT 162 #define CONFIG_SPL_SPI_LOAD 163 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 164 165 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" 166 167 #define CONFIG_SPL_BOARD_INIT 168 #define CONFIG_SPL_NAND_AM33XX_BCH 169 #define CONFIG_SPL_NAND_SUPPORT 170 #define CONFIG_SPL_NAND_BASE 171 #define CONFIG_SPL_NAND_DRIVERS 172 #define CONFIG_SPL_NAND_ECC 173 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 174 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 175 CONFIG_SYS_NAND_PAGE_SIZE) 176 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 177 #define CONFIG_SYS_NAND_OOBSIZE 64 178 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 179 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 180 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 181 10, 11, 12, 13, 14, 15, 16, 17, \ 182 18, 19, 20, 21, 22, 23, 24, 25, \ 183 26, 27, 28, 29, 30, 31, 32, 33, \ 184 34, 35, 36, 37, 38, 39, 40, 41, \ 185 42, 43, 44, 45, 46, 47, 48, 49, \ 186 50, 51, 52, 53, 54, 55, 56, 57, } 187 188 #define CONFIG_SYS_NAND_ECCSIZE 512 189 #define CONFIG_SYS_NAND_ECCBYTES 14 190 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 191 192 #define CONFIG_SYS_NAND_ECCSTEPS 4 193 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ 194 CONFIG_SYS_NAND_ECCSTEPS) 195 196 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 197 198 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 199 200 /* 201 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 202 * 64 bytes before this address should be set aside for u-boot.img's 203 * header. That is 0x800FFFC0--0x80100000 should not be used for any 204 * other needs. 205 */ 206 #define CONFIG_SYS_TEXT_BASE 0x80100000 207 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 208 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 209 210 /* 211 * Since SPL did pll and ddr initialization for us, 212 * we don't need to do it twice. 213 */ 214 #ifndef CONFIG_SPL_BUILD 215 #define CONFIG_SKIP_LOWLEVEL_INIT 216 #endif 217 218 #ifndef CONFIG_SPL_BUILD 219 /* 220 * USB configuration 221 */ 222 #define CONFIG_USB_MUSB_DSPS 223 #define CONFIG_ARCH_MISC_INIT 224 #define CONFIG_USB_MUSB_GADGET 225 #define CONFIG_USB_MUSB_PIO_ONLY 226 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT 227 #undef CONFIG_USB_GADGET_DUALSPEED 228 #define CONFIG_USB_GADGET_VBUS_DRAW 2 229 #define CONFIG_USB_MUSB_HOST 230 231 #define CONFIG_AM335X_USB0 232 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 233 #define CONFIG_AM335X_USB1 234 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 235 #ifdef CONFIG_USB_MUSB_HOST 236 #define CONFIG_CMD_USB 237 #define CONFIG_USB_STORAGE 238 #endif 239 240 #ifdef CONFIG_USB_MUSB_GADGET 241 #define CONFIG_USB_ETHER 242 #define CONFIG_USB_ETH_RNDIS 243 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" 244 #endif /* CONFIG_USB_MUSB_GADGET */ 245 246 #define CONFIG_USB_GADGET 247 #define CONFIG_USB_GADGET_DOWNLOAD 248 249 /* USB DRACO ID as default */ 250 #define CONFIG_USBD_HS 251 #define CONFIG_G_DNL_VENDOR_NUM 0x0908 252 #define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 253 #define CONFIG_G_DNL_MANUFACTURER "Siemens AG" 254 255 /* USB Device Firmware Update support */ 256 #define CONFIG_USB_FUNCTION_DFU 257 #define CONFIG_DFU_NAND 258 #define CONFIG_CMD_DFU 259 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) 260 #define DFU_MANIFEST_POLL_TIMEOUT 25000 261 262 #endif /* CONFIG_SPL_BUILD */ 263 264 /* 265 * Default to using SPI for environment, etc. We have multiple copies 266 * of SPL as the ROM will check these locations. 267 * 0x0 - 0x20000 : First copy of SPL 268 * 0x20000 - 0x40000 : Second copy of SPL 269 * 0x40000 - 0x60000 : Third copy of SPL 270 * 0x60000 - 0x80000 : Fourth copy of SPL 271 * 0x80000 - 0xDF000 : U-Boot 272 * 0xDF000 - 0xE0000 : U-Boot Environment 273 * 0xE0000 - 0x442000 : Linux Kernel 274 * 0x442000 - 0x800000 : Userland 275 */ 276 #if defined(CONFIG_SPI_BOOT) 277 # undef CONFIG_ENV_IS_NOWHERE 278 # define CONFIG_ENV_IS_IN_SPI_FLASH 279 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 280 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ 281 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 282 #endif /* SPI support */ 283 284 /* Unsupported features */ 285 #undef CONFIG_USE_IRQ 286 287 #define CONFIG_CMD_DHCP 288 #define CONFIG_CMD_PING 289 #define CONFIG_DRIVER_TI_CPSW 290 #define CONFIG_MII 291 #define CONFIG_PHY_GIGE 292 #define CONFIG_PHYLIB 293 #define CONFIG_CMD_MII 294 #define CONFIG_BOOTP_DEFAULT 295 #define CONFIG_BOOTP_DNS 296 #define CONFIG_BOOTP_DNS2 297 #define CONFIG_BOOTP_SEND_HOSTNAME 298 #define CONFIG_BOOTP_GATEWAY 299 #define CONFIG_BOOTP_SUBNETMASK 300 #define CONFIG_NET_RETRY_COUNT 10 301 302 #define CONFIG_NAND 303 /* NAND support */ 304 #ifdef CONFIG_NAND 305 #define CONFIG_CMD_NAND 306 307 /* UBI Support */ 308 #ifndef CONFIG_SPL_BUILD 309 #define CONFIG_CMD_MTDPARTS 310 #define CONFIG_MTD_PARTITIONS 311 #define CONFIG_MTD_DEVICE 312 #define CONFIG_RBTREE 313 #define CONFIG_LZO 314 #define CONFIG_CMD_UBI 315 #define CONFIG_CMD_UBIFS 316 #endif 317 318 /* Commen environment */ 319 #define CONFIG_PREBOOT 320 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ 321 "setenv bootargs ${bootargs};" \ 322 "mtdparts default;" \ 323 "draco_led 1;" \ 324 "dfu 0 nand 0;" \ 325 "draco_led 0;\0" \ 326 327 #define COMMON_ENV_NAND_BOOT \ 328 "nand_boot=echo Booting from nand; " \ 329 "if test ${upgrade_available} -eq 1; then " \ 330 "if test ${bootcount} -gt ${bootlimit}; " \ 331 "then " \ 332 "setenv upgrade_available 0;" \ 333 "setenv ${partitionset_active} true;" \ 334 "if test -n ${A}; then " \ 335 "setenv partitionset_active B; " \ 336 "env delete A; " \ 337 "fi;" \ 338 "if test -n ${B}; then " \ 339 "setenv partitionset_active A; " \ 340 "env delete B; " \ 341 "fi;" \ 342 "saveenv; " \ 343 "fi;" \ 344 "fi;" \ 345 "echo set ${partitionset_active}...;" \ 346 "run nand_args; " 347 348 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ 349 "flash_self_test=setenv testargs test; " \ 350 "run nand_boot\0" \ 351 "dfu_start=echo Preparing for dfu mode ...; " \ 352 "run dfu_args; \0" 353 354 #define COMMON_ENV_SETTINGS \ 355 "verify=no \0" \ 356 "project_dir=targetdir\0" \ 357 "upgrade_available=0\0" \ 358 "altbootcmd=run bootcmd\0" \ 359 "bootlimit=3\0" \ 360 "partitionset_active=A\0" \ 361 "loadaddr=0x82000000\0" \ 362 "kloadaddr=0x81000000\0" \ 363 "script_addr=0x81900000\0" \ 364 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ 365 "nfsopts=nolock rw\0" \ 366 "ip_method=none\0" \ 367 "bootenv=uEnv.txt\0" \ 368 "bootargs_defaults=setenv bootargs " \ 369 "console=${console} " \ 370 "${testargs} " \ 371 "${optargs}\0" \ 372 "siemens_help=echo; "\ 373 "echo Type 'run flash_self' to use kernel and root " \ 374 "filesystem on memory; echo Type 'run flash_self_test' to " \ 375 "use kernel and root filesystem on memory, boot in test " \ 376 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ 377 "from memory and root filesystem over NFS; echo Type " \ 378 "'run net_nfs' to get Kernel over TFTP and mount root " \ 379 "filesystem over NFS; " \ 380 "echo Set partitionset_active variable to 'A' " \ 381 "or 'B' to select kernel and rootfs partition; " \ 382 "echo" \ 383 "\0" 384 385 /* 386 * Variant 1 partition layout 387 * chip-size = 256MiB 388 *| name | size | address area | 389 *------------------------------------------------------- 390 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 391 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 392 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 393 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 394 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 395 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | 396 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | 397 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | 398 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | 399 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | 400 *------------------------------------------------------- 401 */ 402 #define MTDIDS_NAME_STR "omap2-nand.0" 403 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR 404 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ 405 "128k(spl)," \ 406 "128k(spl.backup1)," \ 407 "128k(spl.backup2)," \ 408 "128k(spl.backup3)," \ 409 "1920k(u-boot)," \ 410 "128k(uboot.env)," \ 411 "5120k(kernel_a)," \ 412 "5120k(kernel_b)," \ 413 "8192k(mtdoops)," \ 414 "-(rootfs)" 415 416 #define DFU_ALT_INFO_NAND_V1 \ 417 "spl part 0 1;" \ 418 "spl.backup1 part 0 2;" \ 419 "spl.backup2 part 0 3;" \ 420 "spl.backup3 part 0 4;" \ 421 "u-boot part 0 5;" \ 422 "u-boot.env part 0 6;" \ 423 "kernel_a part 0 7;" \ 424 "kernel_b part 0 8;" \ 425 "rootfs partubi 0 10" 426 427 #define CONFIG_ENV_SETTINGS_NAND_V1 \ 428 "nand_active_ubi_vol=rootfs_a\0" \ 429 "nand_active_ubi_vol_A=rootfs_a\0" \ 430 "nand_active_ubi_vol_B=rootfs_b\0" \ 431 "nand_root_fs_type=ubifs rootwait=1\0" \ 432 "nand_src_addr=0x280000\0" \ 433 "nand_src_addr_A=0x280000\0" \ 434 "nand_src_addr_B=0x780000\0" \ 435 "nand_args=run bootargs_defaults;" \ 436 "mtdparts default;" \ 437 "setenv ${partitionset_active} true;" \ 438 "if test -n ${A}; then " \ 439 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ 440 "setenv nand_src_addr ${nand_src_addr_A};" \ 441 "fi;" \ 442 "if test -n ${B}; then " \ 443 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ 444 "setenv nand_src_addr ${nand_src_addr_B};" \ 445 "fi;" \ 446 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 447 "ubi.mtd=9,2048;" \ 448 "setenv bootargs ${bootargs} " \ 449 "root=${nand_root} noinitrd ${mtdparts} " \ 450 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 451 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 452 "=mtdoops\0" \ 453 COMMON_ENV_DFU_ARGS \ 454 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ 455 COMMON_ENV_NAND_BOOT \ 456 "nand read.i ${kloadaddr} ${nand_src_addr} " \ 457 "${nand_img_size}; bootm ${kloadaddr}\0" \ 458 COMMON_ENV_NAND_CMDS 459 460 #define CONFIG_ENV_SETTINGS_V1 \ 461 COMMON_ENV_SETTINGS \ 462 "net_args=run bootargs_defaults;" \ 463 "mtdparts default;" \ 464 "setenv bootfile ${project_dir}/kernel/uImage;" \ 465 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 466 "setenv bootargs ${bootargs} " \ 467 "root=/dev/nfs ${mtdparts} " \ 468 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 469 "ip=${ipaddr}:${serverip}:" \ 470 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 471 "net_nfs=echo Booting from network ...; " \ 472 "run net_args; " \ 473 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 474 "bootm ${kloadaddr}\0" 475 476 /* 477 * Variant 2 partition layout 478 * chip-size = 256MiB or 512 MiB 479 *| name | size | address area | 480 *------------------------------------------------------- 481 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 482 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 483 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 484 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 485 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 486 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 487 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 488 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | 489 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | 490 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | 491 *------------------------------------------------------- 492 */ 493 494 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ 495 "128k(spl)," \ 496 "128k(spl.backup1)," \ 497 "128k(spl.backup2)," \ 498 "128k(spl.backup3)," \ 499 "1920k(u-boot)," \ 500 "512k(u-boot.env0)," \ 501 "512k(u-boot.env1)," \ 502 "512k(mtdoops)," \ 503 "-(rootfs)" 504 505 506 #define DFU_ALT_INFO_NAND_V2 \ 507 "spl part 0 1;" \ 508 "spl.backup1 part 0 2;" \ 509 "spl.backup2 part 0 3;" \ 510 "spl.backup3 part 0 4;" \ 511 "u-boot part 0 5;" \ 512 "u-boot.env0 part 0 6;" \ 513 "u-boot.env1 part 0 7;" \ 514 "rootfs partubi 0 9" \ 515 516 #define CONFIG_ENV_SETTINGS_NAND_V2 \ 517 "nand_active_ubi_vol=rootfs_a\0" \ 518 "rootfs_name=rootfs\0" \ 519 "kernel_name=uImage\0"\ 520 "nand_root_fs_type=ubifs rootwait=1\0" \ 521 "nand_args=run bootargs_defaults;" \ 522 "mtdparts default;" \ 523 "setenv ${partitionset_active} true;" \ 524 "if test -n ${A}; then " \ 525 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ 526 "fi;" \ 527 "if test -n ${B}; then " \ 528 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ 529 "fi;" \ 530 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ 531 "ubi.mtd=rootfs,2048;" \ 532 "setenv bootargs ${bootargs} " \ 533 "root=${nand_root} noinitrd ${mtdparts} " \ 534 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ 535 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ 536 "=mtdoops\0" \ 537 COMMON_ENV_DFU_ARGS \ 538 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ 539 COMMON_ENV_NAND_BOOT \ 540 "ubi part rootfs 2048;" \ 541 "ubifsmount ubi0:${nand_active_ubi_vol};" \ 542 "ubifsload ${kloadaddr} boot/${kernel_name};" \ 543 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ 544 "bootm ${kloadaddr} - ${loadaddr}\0" \ 545 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ 546 "bootm ${kloadaddr} - ${loadaddr}\0" \ 547 COMMON_ENV_NAND_CMDS 548 549 #define CONFIG_ENV_SETTINGS_V2 \ 550 COMMON_ENV_SETTINGS \ 551 "net_args=run bootargs_defaults;" \ 552 "mtdparts default;" \ 553 "setenv bootfile ${project_dir}/kernel/uImage;" \ 554 "setenv bootdtb ${project_dir}/kernel/dtb;" \ 555 "setenv rootpath /home/projects/${project_dir}/rootfs;" \ 556 "setenv bootargs ${bootargs} " \ 557 "root=/dev/nfs ${mtdparts} " \ 558 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 559 "ip=${ipaddr}:${serverip}:" \ 560 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ 561 "net_nfs=echo Booting from network ...; " \ 562 "run net_args; " \ 563 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ 564 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ 565 "bootm ${kloadaddr} - ${loadaddr}\0" 566 567 /* 568 * Variant 3 partition layout 569 * chip-size = 512MiB 570 *| name | size | address area | 571 *------------------------------------------------------- 572 *| spl | 128.000 KiB | 0x 0..0x 1ffff | 573 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | 574 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | 575 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | 576 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | 577 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | 578 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | 579 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | 580 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | 581 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | 582 *------------------------------------------------------- 583 */ 584 585 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ 586 "128k(spl)," \ 587 "128k(spl.backup1)," \ 588 "128k(spl.backup2)," \ 589 "128k(spl.backup3)," \ 590 "1920k(u-boot)," \ 591 "512k(u-boot.env0)," \ 592 "512k(u-boot.env1)," \ 593 "300m(rootfs)," \ 594 "512k(mtdoops)," \ 595 "-(configuration)" 596 597 598 #define CONFIG_NAND_OMAP_GPMC 599 #define CONFIG_NAND_OMAP_ELM 600 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ 601 /* to access nand at */ 602 /* CS0 */ 603 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND 604 devices */ 605 #if !defined(CONFIG_SPI_BOOT) 606 #undef CONFIG_ENV_IS_NOWHERE 607 #define CONFIG_ENV_IS_IN_NAND 608 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 609 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 610 #endif 611 #endif 612 613 #define CONFIG_OMAP_GPIO 614 615 /* Gpio cmd support */ 616 617 /* Watchdog */ 618 #define CONFIG_HW_WATCHDOG 619 620 /* Reboot after 60 sec if bootcmd fails */ 621 #define CONFIG_RESET_TO_RETRY 622 #define CONFIG_BOOT_RETRY_TIME 60 623 624 #define CONFIG_BOOTCOUNT_LIMIT 625 #define CONFIG_BOOTCOUNT_ENV 626 627 /* Enable Device-Tree (FDT) support */ 628 #define CONFIG_CMD_FDT 629 630 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ 631