1 /* 2 * Configuation settings for shmin (T-SH7706LAN, T-SH7706LSR) 3 * 4 * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __SHMIN_H 10 #define __SHMIN_H 11 12 #define CONFIG_SH 1 13 #define CONFIG_SH3 1 14 #define CONFIG_CPU_SH7706 1 15 /* T-SH7706LAN */ 16 #define CONFIG_SHMIN 1 17 /* T-SH7706LSR*/ 18 /* #define CONFIG_T_SH7706LSR 1 */ 19 20 #define CONFIG_CMD_FLASH 21 #define CONFIG_CMD_MEMORY 22 #define CONFIG_CMD_SDRAM 23 #define CONFIG_CMD_NET 24 #define CONFIG_CMD_PING 25 #define CONFIG_CMD_NFS 26 #define CONFIG_CMD_ENV 27 #define CONFIG_CMD_SAVEENV 28 29 #define CONFIG_BAUDRATE 115200 30 #define CONFIG_BOOTARGS "console=ttySC0,115200" 31 32 /* 33 * This board has original boot loader. If you write u-boot to 0x0, 34 * you should set undef. 35 */ 36 #define CONFIG_VERSION_VARIABLE 37 #undef CONFIG_SHOW_BOOT_PROGRESS 38 39 /* system */ 40 #define SHMIN_SDRAM_BASE (0x8C000000) 41 #define SHMIN_FLASH_BASE_1 (0xA0000000) 42 43 #define CONFIG_SYS_TEXT_BASE 0x8DFB0000 44 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 45 #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ 46 #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 47 #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ 48 /* Buffer size for Boot Arguments passed to kernel */ 49 #define CONFIG_SYS_BARGSIZE 512 50 /* List of legal baudrate settings for this board */ 51 #define CONFIG_SYS_BAUDRATE_TABLE { 9600,14400,19200,38400,57600,115200 } 52 53 /* SCIF */ 54 #define CONFIG_SCIF_CONSOLE 1 55 #define CONFIG_CONS_SCIF0 1 56 57 /* memory */ 58 #define CONFIG_SYS_SDRAM_BASE SHMIN_SDRAM_BASE 59 #define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024) 60 #define CONFIG_SYS_MEMTEST_START SHMIN_SDRAM_BASE 61 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - (256 * 1024)) 62 63 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1 * 1024 * 1024) 64 #define CONFIG_SYS_MONITOR_BASE (SHMIN_FLASH_BASE_1 + CONFIG_ENV_SECT_SIZE) 65 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) 66 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) 67 #define CONFIG_SYS_GBL_DATA_SIZE 256 68 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 69 70 /* FLASH */ 71 #define CONFIG_SYS_FLASH_CFI 72 #define CONFIG_FLASH_CFI_DRIVER 73 #undef CONFIG_SYS_FLASH_QUIET_TEST 74 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 75 #define CONFIG_SYS_FLASH_BASE SHMIN_FLASH_BASE_1 76 #define CONFIG_SYS_MAX_FLASH_SECT 11 77 #define CONFIG_SYS_MAX_FLASH_BANKS 1 78 79 #define CONFIG_FLASH_CFI_LEGACY 80 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_FLASH_BASE 81 #define CONFIG_SYS_ATMEL_TOTALSECT CONFIG_SYS_MAX_FLASH_SECT 82 #define CONFIG_SYS_ATMEL_REGION 4 83 #define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} 84 #define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} 85 86 #define CONFIG_ENV_IS_IN_FLASH 87 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 88 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 89 90 #ifdef CONFIG_T_SH7706LSR 91 #define CONFIG_ENV_ADDR (SHMIN_FLASH_BASE_1 + 70000) 92 #else 93 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 94 #endif 95 96 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 97 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 98 99 /* Board Clock */ 100 #ifdef CONFIG_T_SH7706LSR 101 #define CONFIG_SYS_CLK_FREQ 40000000 102 #else 103 #define CONFIG_SYS_CLK_FREQ 33333333 104 #endif /* CONFIG_T_SH7706LSR */ 105 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 106 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 107 #define CONFIG_SYS_TMU_CLK_DIV 4 108 109 /* Network device */ 110 #define CONFIG_DRIVER_NE2000 111 #define CONFIG_DRIVER_NE2000_BASE (0xb0000300) 112 113 #endif /* __SHMIN_H */ 114