1 /* 2 * (C) Copyright 2009-2014 3 * Gerald Kerma <dreagle@doukki.net> 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _CONFIG_SHEEVAPLUG_H 11 #define _CONFIG_SHEEVAPLUG_H 12 13 #define CONFIG_SYS_GENERIC_BOARD 14 15 /* 16 * Version number information 17 */ 18 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 24 #define CONFIG_KW88F6281 1 /* SOC Name */ 25 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 27 28 /* 29 * Compression configuration 30 */ 31 #define CONFIG_BZIP2 32 #define CONFIG_LZMA 33 #define CONFIG_LZO 34 35 /* 36 * Enable device tree support 37 */ 38 #define CONFIG_OF_LIBFDT 39 40 /* 41 * Miscellaneous configurable options 42 */ 43 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 44 45 /* 46 * Commands configuration 47 */ 48 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 49 #define CONFIG_CMD_BOOTZ 50 #define CONFIG_CMD_DHCP 51 #define CONFIG_CMD_ENV 52 #define CONFIG_CMD_IDE 53 #define CONFIG_CMD_MII 54 #define CONFIG_CMD_MMC 55 #define CONFIG_CMD_NAND 56 #define CONFIG_CMD_PING 57 #define CONFIG_CMD_USB 58 59 /* 60 * mv-common.h should be defined after CMD configs since it used them 61 * to enable certain macros 62 */ 63 #include "mv-common.h" 64 65 /* 66 * Environment variables configurations 67 */ 68 #ifdef CONFIG_CMD_NAND 69 #define CONFIG_ENV_IS_IN_NAND 1 70 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 71 #else 72 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 73 #endif 74 /* 75 * max 4k env size is enough, but in case of nand 76 * it has to be rounded to sector size 77 */ 78 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 79 #define CONFIG_ENV_ADDR 0x80000 80 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 81 82 /* 83 * Default environment variables 84 */ 85 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 86 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 87 "${x_bootcmd_usb}; bootm 0x6400000;" 88 89 #define CONFIG_MTDPARTS \ 90 "mtdparts=orion_nand:512K(uboot)," \ 91 "512K(env),1M(script),6M(kernel)," \ 92 "12M(ramdisk),4M(spare),-(rootfs)" 93 94 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 95 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 96 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 97 "x_bootcmd_usb=usb start\0" \ 98 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 99 100 #define MTDIDS_DEFAULT "nand0=orion_nand" 101 102 #define MTDPARTS_DEFAULT \ 103 "mtdparts="CONFIG_MTDPARTS 104 105 /* 106 * Ethernet Driver configuration 107 */ 108 #ifdef CONFIG_CMD_NET 109 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 110 #define CONFIG_PHY_BASE_ADR 0 111 #endif /* CONFIG_CMD_NET */ 112 113 /* 114 * SDIO/MMC Card Configuration 115 */ 116 #ifdef CONFIG_CMD_MMC 117 #define CONFIG_MMC 118 #define CONFIG_GENERIC_MMC 119 #define CONFIG_MVEBU_MMC 120 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 121 #endif /* CONFIG_CMD_MMC */ 122 123 /* 124 * SATA driver configuration 125 */ 126 #ifdef CONFIG_CMD_IDE 127 #define __io 128 #define CONFIG_IDE_PREINIT 129 #define CONFIG_DOS_PARTITION 130 #define CONFIG_MVSATA_IDE_USE_PORT0 131 #define CONFIG_MVSATA_IDE_USE_PORT1 132 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 133 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 134 #endif /* CONFIG_CMD_IDE */ 135 136 /* 137 * File system 138 */ 139 #define CONFIG_CMD_EXT2 140 #define CONFIG_CMD_EXT4 141 #define CONFIG_CMD_FAT 142 #define CONFIG_CMD_JFFS2 143 #define CONFIG_CMD_UBI 144 #define CONFIG_CMD_UBIFS 145 #define CONFIG_RBTREE 146 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 147 #define CONFIG_MTD_PARTITIONS 148 #define CONFIG_CMD_MTDPARTS 149 150 #endif /* _CONFIG_SHEEVAPLUG_H */ 151