1 /* 2 * (C) Copyright 2009-2014 3 * Gerald Kerma <dreagle@doukki.net> 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _CONFIG_SHEEVAPLUG_H 11 #define _CONFIG_SHEEVAPLUG_H 12 13 /* 14 * High Level Configuration Options (easy to change) 15 */ 16 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 17 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 18 19 /* 20 * Commands configuration 21 */ 22 23 /* 24 * Standard filesystems 25 */ 26 #define CONFIG_SYS_MVFS 27 28 /* 29 * mv-plug-common.h should be defined after CMD configs since it used them 30 * to enable certain macros 31 */ 32 #include "mv-plug-common.h" 33 34 /* 35 * Environment variables configurations 36 */ 37 #ifdef CONFIG_CMD_NAND 38 #define CONFIG_ENV_IS_IN_NAND 1 39 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 40 #else 41 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 42 #endif 43 /* 44 * max 4k env size is enough, but in case of nand 45 * it has to be rounded to sector size 46 */ 47 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 48 #define CONFIG_ENV_ADDR 0x80000 49 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 50 51 /* 52 * Default environment variables 53 */ 54 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 55 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 56 "bootm 0x6400000;" 57 58 #define CONFIG_MTDPARTS \ 59 "orion_nand:512K(uboot)," \ 60 "512K(env),4M(kernel)," \ 61 "-(rootfs)\0" 62 63 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 64 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 65 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ 66 "x_bootcmd_usb=usb start\0" \ 67 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 68 69 #define MTDIDS_DEFAULT "nand0=orion_nand" 70 71 #define MTDPARTS_DEFAULT \ 72 "mtdparts="CONFIG_MTDPARTS 73 74 /* 75 * Ethernet Driver configuration 76 */ 77 #ifdef CONFIG_CMD_NET 78 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 79 #define CONFIG_PHY_BASE_ADR 0 80 #endif /* CONFIG_CMD_NET */ 81 82 /* 83 * SDIO/MMC Card Configuration 84 */ 85 #ifdef CONFIG_CMD_MMC 86 #define CONFIG_MMC 87 #define CONFIG_GENERIC_MMC 88 #define CONFIG_MVEBU_MMC 89 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 90 #endif /* CONFIG_CMD_MMC */ 91 92 /* 93 * SATA driver configuration 94 */ 95 #ifdef CONFIG_CMD_IDE 96 #define __io 97 #define CONFIG_IDE_PREINIT 98 #define CONFIG_DOS_PARTITION 99 #define CONFIG_MVSATA_IDE_USE_PORT0 100 #define CONFIG_MVSATA_IDE_USE_PORT1 101 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 102 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 103 #endif /* CONFIG_CMD_IDE */ 104 105 #endif /* _CONFIG_SHEEVAPLUG_H */ 106