1 /* 2 * (C) Copyright 2009-2014 3 * Gerald Kerma <dreagle@doukki.net> 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _CONFIG_SHEEVAPLUG_H 11 #define _CONFIG_SHEEVAPLUG_H 12 13 #define CONFIG_SYS_GENERIC_BOARD 14 15 /* 16 * Version number information 17 */ 18 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" 19 20 /* 21 * High Level Configuration Options (easy to change) 22 */ 23 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 24 #define CONFIG_KW88F6281 1 /* SOC Name */ 25 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 27 28 /* 29 * Compression configuration 30 */ 31 #define CONFIG_BZIP2 32 #define CONFIG_LZMA 33 #define CONFIG_LZO 34 35 /* 36 * Enable device tree support 37 */ 38 #define CONFIG_OF_LIBFDT 39 40 /* 41 * Miscellaneous configurable options 42 */ 43 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 44 45 /* 46 * Commands configuration 47 */ 48 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 49 #include <config_cmd_default.h> 50 #define CONFIG_CMD_BOOTZ 51 #define CONFIG_CMD_DHCP 52 #define CONFIG_CMD_ENV 53 #define CONFIG_CMD_IDE 54 #define CONFIG_CMD_MII 55 #define CONFIG_CMD_MMC 56 #define CONFIG_CMD_NAND 57 #define CONFIG_CMD_PING 58 #define CONFIG_CMD_USB 59 60 /* 61 * mv-common.h should be defined after CMD configs since it used them 62 * to enable certain macros 63 */ 64 #include "mv-common.h" 65 66 /* 67 * Environment variables configurations 68 */ 69 #ifdef CONFIG_CMD_NAND 70 #define CONFIG_ENV_IS_IN_NAND 1 71 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 72 #else 73 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 74 #endif 75 /* 76 * max 4k env size is enough, but in case of nand 77 * it has to be rounded to sector size 78 */ 79 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 80 #define CONFIG_ENV_ADDR 0x80000 81 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 82 83 /* 84 * Default environment variables 85 */ 86 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 87 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 88 "${x_bootcmd_usb}; bootm 0x6400000;" 89 90 #define CONFIG_MTDPARTS \ 91 "mtdparts=orion_nand:512K(uboot)," \ 92 "512K(env),1M(script),6M(kernel)," \ 93 "12M(ramdisk),4M(spare),-(rootfs)" 94 95 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 96 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 97 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 98 "x_bootcmd_usb=usb start\0" \ 99 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 100 101 #define MTDIDS_DEFAULT "nand0=orion_nand" 102 103 #define MTDPARTS_DEFAULT \ 104 "mtdparts="CONFIG_MTDPARTS 105 106 /* 107 * Ethernet Driver configuration 108 */ 109 #ifdef CONFIG_CMD_NET 110 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 111 #define CONFIG_PHY_BASE_ADR 0 112 #endif /* CONFIG_CMD_NET */ 113 114 /* 115 * SDIO/MMC Card Configuration 116 */ 117 #ifdef CONFIG_CMD_MMC 118 #define CONFIG_MMC 119 #define CONFIG_GENERIC_MMC 120 #define CONFIG_MVEBU_MMC 121 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 122 #endif /* CONFIG_CMD_MMC */ 123 124 /* 125 * SATA driver configuration 126 */ 127 #ifdef CONFIG_CMD_IDE 128 #define __io 129 #define CONFIG_IDE_PREINIT 130 #define CONFIG_DOS_PARTITION 131 #define CONFIG_MVSATA_IDE_USE_PORT0 132 #define CONFIG_MVSATA_IDE_USE_PORT1 133 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 134 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 135 #endif /* CONFIG_CMD_IDE */ 136 137 /* 138 * File system 139 */ 140 #define CONFIG_CMD_EXT2 141 #define CONFIG_CMD_EXT4 142 #define CONFIG_CMD_FAT 143 #define CONFIG_CMD_JFFS2 144 #define CONFIG_CMD_UBI 145 #define CONFIG_CMD_UBIFS 146 #define CONFIG_RBTREE 147 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 148 #define CONFIG_MTD_PARTITIONS 149 #define CONFIG_CMD_MTDPARTS 150 151 #endif /* _CONFIG_SHEEVAPLUG_H */ 152