1 /* 2 * (C) Copyright 2009-2014 3 * Gerald Kerma <dreagle@doukki.net> 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _CONFIG_SHEEVAPLUG_H 11 #define _CONFIG_SHEEVAPLUG_H 12 13 /* 14 * Version number information 15 */ 16 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Compression configuration 28 */ 29 #define CONFIG_BZIP2 30 #define CONFIG_LZMA 31 #define CONFIG_LZO 32 33 /* 34 * Miscellaneous configurable options 35 */ 36 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 37 38 /* 39 * Commands configuration 40 */ 41 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 42 #include <config_cmd_default.h> 43 #define CONFIG_CMD_BOOTZ 44 #define CONFIG_CMD_DHCP 45 #define CONFIG_CMD_ENV 46 #define CONFIG_CMD_IDE 47 #define CONFIG_CMD_MII 48 #define CONFIG_CMD_MMC 49 #define CONFIG_CMD_NAND 50 #define CONFIG_CMD_PING 51 #define CONFIG_CMD_USB 52 /* 53 * mv-common.h should be defined after CMD configs since it used them 54 * to enable certain macros 55 */ 56 #include "mv-common.h" 57 58 /* 59 * Environment variables configurations 60 */ 61 #ifdef CONFIG_CMD_NAND 62 #define CONFIG_ENV_IS_IN_NAND 1 63 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 64 #else 65 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 66 #endif 67 /* 68 * max 4k env size is enough, but in case of nand 69 * it has to be rounded to sector size 70 */ 71 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 72 #define CONFIG_ENV_ADDR 0x80000 73 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 74 75 /* 76 * Default environment variables 77 */ 78 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 79 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 80 "${x_bootcmd_usb}; bootm 0x6400000;" 81 82 #define CONFIG_MTDPARTS \ 83 "mtdparts=orion_nand:512K(uboot)," \ 84 "512K(env),1M(script),6M(kernel)," \ 85 "12M(ramdisk),4M(spare),-(rootfs)" 86 87 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 88 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 89 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 90 "x_bootcmd_usb=usb start\0" \ 91 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 92 93 #define MTDIDS_DEFAULT "nand0=orion_nand" 94 95 #define MTDPARTS_DEFAULT \ 96 "mtdparts="CONFIG_MTDPARTS 97 98 /* 99 * Ethernet Driver configuration 100 */ 101 #ifdef CONFIG_CMD_NET 102 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 103 #define CONFIG_PHY_BASE_ADR 0 104 #endif /* CONFIG_CMD_NET */ 105 106 /* 107 * SDIO/MMC Card Configuration 108 */ 109 #ifdef CONFIG_CMD_MMC 110 #define CONFIG_MMC 111 #define CONFIG_GENERIC_MMC 112 #define CONFIG_MVEBU_MMC 113 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 114 #endif /* CONFIG_CMD_MMC */ 115 116 /* 117 * SATA driver configuration 118 */ 119 #ifdef CONFIG_CMD_IDE 120 #define __io 121 #define CONFIG_IDE_PREINIT 122 #define CONFIG_DOS_PARTITION 123 #define CONFIG_MVSATA_IDE_USE_PORT0 124 #define CONFIG_MVSATA_IDE_USE_PORT1 125 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 126 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 127 #endif /* CONFIG_CMD_IDE */ 128 129 /* 130 * File system 131 */ 132 #define CONFIG_CMD_EXT2 133 #define CONFIG_CMD_EXT4 134 #define CONFIG_CMD_FAT 135 #define CONFIG_CMD_JFFS2 136 #define CONFIG_CMD_UBI 137 #define CONFIG_CMD_UBIFS 138 #define CONFIG_RBTREE 139 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 140 #define CONFIG_MTD_PARTITIONS 141 #define CONFIG_CMD_MTDPARTS 142 #define CONFIG_LZO 143 144 #endif /* _CONFIG_SHEEVAPLUG_H */ 145