1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef _CONFIG_SHEEVAPLUG_H 10 #define _CONFIG_SHEEVAPLUG_H 11 12 /* 13 * Version number information 14 */ 15 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 21 #define CONFIG_KIRKWOOD 1 /* SOC Family Name */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Commands configuration 28 */ 29 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 30 #include <config_cmd_default.h> 31 #define CONFIG_CMD_DHCP 32 #define CONFIG_CMD_ENV 33 #define CONFIG_CMD_MII 34 #define CONFIG_CMD_NAND 35 #define CONFIG_CMD_PING 36 #define CONFIG_CMD_USB 37 /* 38 * mv-common.h should be defined after CMD configs since it used them 39 * to enable certain macros 40 */ 41 #include "mv-common.h" 42 43 /* 44 * Environment variables configurations 45 */ 46 #ifdef CONFIG_CMD_NAND 47 #define CONFIG_ENV_IS_IN_NAND 1 48 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 49 #else 50 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 51 #endif 52 /* 53 * max 4k env size is enough, but in case of nand 54 * it has to be rounded to sector size 55 */ 56 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 57 #define CONFIG_ENV_ADDR 0x60000 58 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 59 60 /* 61 * Default environment variables 62 */ 63 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 64 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 65 "${x_bootcmd_usb}; bootm 0x6400000;" 66 67 #define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ 68 "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" 69 70 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 71 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 72 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 73 "x_bootcmd_usb=usb start\0" \ 74 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 75 76 /* 77 * Ethernet Driver configuration 78 */ 79 #ifdef CONFIG_CMD_NET 80 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 81 #define CONFIG_PHY_BASE_ADR 0 82 #endif /* CONFIG_CMD_NET */ 83 84 /* 85 * File system 86 */ 87 #define CONFIG_CMD_EXT2 88 #define CONFIG_CMD_FAT 89 #define CONFIG_CMD_JFFS2 90 #define CONFIG_CMD_UBI 91 #define CONFIG_CMD_UBIFS 92 #define CONFIG_RBTREE 93 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 94 #define CONFIG_MTD_PARTITIONS 95 #define CONFIG_CMD_MTDPARTS 96 #define CONFIG_LZO 97 98 #endif /* _CONFIG_SHEEVAPLUG_H */ 99