1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2009-2014 4 * Gerald Kerma <dreagle@doukki.net> 5 * Marvell Semiconductor <www.marvell.com> 6 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 7 */ 8 9 #ifndef _CONFIG_SHEEVAPLUG_H 10 #define _CONFIG_SHEEVAPLUG_H 11 12 /* 13 * High Level Configuration Options (easy to change) 14 */ 15 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 16 17 /* 18 * Commands configuration 19 */ 20 21 /* 22 * Standard filesystems 23 */ 24 #define CONFIG_BZIP2 25 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 26 #define CONFIG_MTD_PARTITIONS 27 28 /* 29 * mv-plug-common.h should be defined after CMD configs since it used them 30 * to enable certain macros 31 */ 32 #include "mv-plug-common.h" 33 34 /* 35 * Environment variables configurations 36 */ 37 #ifdef CONFIG_CMD_NAND 38 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 39 #endif 40 /* 41 * max 4k env size is enough, but in case of nand 42 * it has to be rounded to sector size 43 */ 44 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 45 #define CONFIG_ENV_ADDR 0x80000 46 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 47 48 /* 49 * Default environment variables 50 */ 51 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 52 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 53 "bootm 0x6400000;" 54 55 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 56 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT \ 57 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ 58 "x_bootcmd_usb=usb start\0" \ 59 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 60 61 /* 62 * Ethernet Driver configuration 63 */ 64 #ifdef CONFIG_CMD_NET 65 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 66 #define CONFIG_PHY_BASE_ADR 0 67 #endif /* CONFIG_CMD_NET */ 68 69 /* 70 * SDIO/MMC Card Configuration 71 */ 72 #ifdef CONFIG_CMD_MMC 73 #define CONFIG_MVEBU_MMC 74 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 75 #endif /* CONFIG_CMD_MMC */ 76 77 /* 78 * SATA driver configuration 79 */ 80 #ifdef CONFIG_IDE 81 #define __io 82 #define CONFIG_IDE_PREINIT 83 #define CONFIG_MVSATA_IDE_USE_PORT0 84 #define CONFIG_MVSATA_IDE_USE_PORT1 85 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 86 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 87 #endif /* CONFIG_IDE */ 88 89 #endif /* _CONFIG_SHEEVAPLUG_H */ 90