1 /* 2 * (C) Copyright 2009-2014 3 * Gerald Kerma <dreagle@doukki.net> 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _CONFIG_SHEEVAPLUG_H 11 #define _CONFIG_SHEEVAPLUG_H 12 13 14 /* 15 * Version number information 16 */ 17 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug" 18 19 /* 20 * High Level Configuration Options (easy to change) 21 */ 22 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 23 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_CMD_MMC 29 30 /* 31 * Standard filesystems 32 */ 33 #define CONFIG_SYS_MVFS 34 35 /* 36 * mv-plug-common.h should be defined after CMD configs since it used them 37 * to enable certain macros 38 */ 39 #include "mv-plug-common.h" 40 41 /* 42 * Environment variables configurations 43 */ 44 #ifdef CONFIG_CMD_NAND 45 #define CONFIG_ENV_IS_IN_NAND 1 46 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 47 #else 48 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 49 #endif 50 /* 51 * max 4k env size is enough, but in case of nand 52 * it has to be rounded to sector size 53 */ 54 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 55 #define CONFIG_ENV_ADDR 0x80000 56 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 57 58 /* 59 * Default environment variables 60 */ 61 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 62 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 63 "bootm 0x6400000;" 64 65 #define CONFIG_MTDPARTS \ 66 "orion_nand:512K(uboot)," \ 67 "512K(env),4M(kernel)," \ 68 "-(rootfs)\0" 69 70 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 71 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ 72 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ 73 "x_bootcmd_usb=usb start\0" \ 74 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" 75 76 #define MTDIDS_DEFAULT "nand0=orion_nand" 77 78 #define MTDPARTS_DEFAULT \ 79 "mtdparts="CONFIG_MTDPARTS 80 81 /* 82 * Ethernet Driver configuration 83 */ 84 #ifdef CONFIG_CMD_NET 85 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 86 #define CONFIG_PHY_BASE_ADR 0 87 #endif /* CONFIG_CMD_NET */ 88 89 /* 90 * SDIO/MMC Card Configuration 91 */ 92 #ifdef CONFIG_CMD_MMC 93 #define CONFIG_MMC 94 #define CONFIG_GENERIC_MMC 95 #define CONFIG_MVEBU_MMC 96 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 97 #endif /* CONFIG_CMD_MMC */ 98 99 /* 100 * SATA driver configuration 101 */ 102 #ifdef CONFIG_CMD_IDE 103 #define __io 104 #define CONFIG_IDE_PREINIT 105 #define CONFIG_DOS_PARTITION 106 #define CONFIG_MVSATA_IDE_USE_PORT0 107 #define CONFIG_MVSATA_IDE_USE_PORT1 108 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 109 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 110 #endif /* CONFIG_CMD_IDE */ 111 112 #endif /* _CONFIG_SHEEVAPLUG_H */ 113