xref: /openbmc/u-boot/include/configs/sh7785lcr.h (revision db00e921)
1 /*
2  * Configuation settings for the Renesas Technology R0P7785LC0011RL board
3  *
4  * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __SH7785LCR_H
10 #define __SH7785LCR_H
11 
12 #define CONFIG_CPU_SH7785	1
13 
14 #define CONFIG_EXTRA_ENV_SETTINGS					\
15 	"bootdevice=0:1\0"						\
16 	"usbload=usb reset;usbboot;usb stop;bootm\0"
17 
18 #define CONFIG_DISPLAY_BOARDINFO
19 #undef	CONFIG_SHOW_BOOT_PROGRESS
20 
21 /* MEMORY */
22 #if defined(CONFIG_SH_32BIT)
23 #define CONFIG_SYS_TEXT_BASE		0x8FF80000
24 /* 0x40000000 - 0x47FFFFFF does not use */
25 #define CONFIG_SH_SDRAM_OFFSET		(0x8000000)
26 #define SH7785LCR_SDRAM_PHYS_BASE	(0x40000000 + CONFIG_SH_SDRAM_OFFSET)
27 #define SH7785LCR_SDRAM_BASE		(0x80000000 + CONFIG_SH_SDRAM_OFFSET)
28 #define SH7785LCR_SDRAM_SIZE		(384 * 1024 * 1024)
29 #define SH7785LCR_FLASH_BASE_1		(0xa0000000)
30 #define SH7785LCR_FLASH_BANK_SIZE	(64 * 1024 * 1024)
31 #define SH7785LCR_USB_BASE		(0xa6000000)
32 #else
33 #define CONFIG_SYS_TEXT_BASE		0x0FF80000
34 #define SH7785LCR_SDRAM_BASE		(0x08000000)
35 #define SH7785LCR_SDRAM_SIZE		(128 * 1024 * 1024)
36 #define SH7785LCR_FLASH_BASE_1		(0xa0000000)
37 #define SH7785LCR_FLASH_BANK_SIZE	(64 * 1024 * 1024)
38 #define SH7785LCR_USB_BASE		(0xb4000000)
39 #endif
40 
41 #define CONFIG_SYS_LONGHELP
42 #define CONFIG_SYS_PBSIZE		256
43 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
44 
45 /* SCIF */
46 #define CONFIG_CONS_SCIF1	1
47 #define CONFIG_SCIF_EXT_CLOCK	1
48 
49 #define CONFIG_SYS_MEMTEST_START	(SH7785LCR_SDRAM_BASE)
50 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
51 					(SH7785LCR_SDRAM_SIZE) - \
52 					 4 * 1024 * 1024)
53 #undef	CONFIG_SYS_ALT_MEMTEST
54 #undef	CONFIG_SYS_MEMTEST_SCRATCH
55 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE
56 
57 #define CONFIG_SYS_SDRAM_BASE	(SH7785LCR_SDRAM_BASE)
58 #define CONFIG_SYS_SDRAM_SIZE	(SH7785LCR_SDRAM_SIZE)
59 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
60 
61 #define CONFIG_SYS_MONITOR_BASE	(SH7785LCR_FLASH_BASE_1)
62 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
63 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
64 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
65 
66 /* FLASH */
67 #define CONFIG_FLASH_CFI_DRIVER
68 #define CONFIG_SYS_FLASH_CFI
69 #undef	CONFIG_SYS_FLASH_QUIET_TEST
70 #define CONFIG_SYS_FLASH_EMPTY_INFO
71 #define CONFIG_SYS_FLASH_BASE		(SH7785LCR_FLASH_BASE_1)
72 #define CONFIG_SYS_MAX_FLASH_SECT	512
73 
74 #define CONFIG_SYS_MAX_FLASH_BANKS	1
75 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + \
76 				 (0 * SH7785LCR_FLASH_BANK_SIZE) }
77 
78 #define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
79 #define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
80 #define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
81 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
82 
83 #undef	CONFIG_SYS_FLASH_PROTECTION
84 #undef	CONFIG_SYS_DIRECT_FLASH_TFTP
85 
86 /* R8A66597 */
87 #define CONFIG_USB_R8A66597_HCD
88 #define CONFIG_R8A66597_BASE_ADDR	SH7785LCR_USB_BASE
89 #define CONFIG_R8A66597_XTAL		0x0000	/* 12MHz */
90 #define CONFIG_R8A66597_LDRV		0x8000	/* 3.3V */
91 #define CONFIG_R8A66597_ENDIAN		0x0000	/* little */
92 
93 /* PCI Controller */
94 #define CONFIG_SH4_PCI
95 #define CONFIG_SH7780_PCI
96 #if defined(CONFIG_SH_32BIT)
97 #define CONFIG_SH7780_PCI_LSR	0x1ff00001
98 #define CONFIG_SH7780_PCI_LAR	0x5f000000
99 #define CONFIG_SH7780_PCI_BAR	0x5f000000
100 #else
101 #define CONFIG_SH7780_PCI_LSR	0x07f00001
102 #define CONFIG_SH7780_PCI_LAR	CONFIG_SYS_SDRAM_SIZE
103 #define CONFIG_SH7780_PCI_BAR	CONFIG_SYS_SDRAM_SIZE
104 #endif
105 #define CONFIG_PCI_SCAN_SHOW	1
106 
107 #define CONFIG_PCI_MEM_BUS	0xFD000000	/* Memory space base addr */
108 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
109 #define CONFIG_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
110 
111 #define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
112 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
113 #define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
114 
115 #if defined(CONFIG_SH_32BIT)
116 #define CONFIG_PCI_SYS_PHYS	SH7785LCR_SDRAM_PHYS_BASE
117 #else
118 #define CONFIG_PCI_SYS_PHYS	CONFIG_SYS_SDRAM_BASE
119 #endif
120 #define CONFIG_PCI_SYS_BUS	CONFIG_SYS_SDRAM_BASE
121 #define CONFIG_PCI_SYS_SIZE	CONFIG_SYS_SDRAM_SIZE
122 
123 /* ENV setting */
124 #define CONFIG_ENV_OVERWRITE	1
125 #define CONFIG_ENV_SECT_SIZE	(256 * 1024)
126 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
127 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
128 #define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
129 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
130 
131 /* Board Clock */
132 /* The SCIF used external clock. system clock only used timer. */
133 #define CONFIG_SYS_CLK_FREQ	50000000
134 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
135 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
136 #define CONFIG_SYS_TMU_CLK_DIV		4
137 
138 #endif	/* __SH7785LCR_H */
139