1 /* 2 * Configuation settings for the Renesas SH7763RDP board 3 * 4 * Copyright (C) 2008 Renesas Solutions Corp. 5 * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __SH7763RDP_H 11 #define __SH7763RDP_H 12 13 #define CONFIG_CPU_SH7763 1 14 #define CONFIG_SH7763RDP 1 15 #define __LITTLE_ENDIAN 1 16 17 /* 18 * Command line configuration. 19 */ 20 #define CONFIG_CMD_SDRAM 21 #define CONFIG_CMD_MII 22 #define CONFIG_CMD_PING 23 #define CONFIG_CMD_JFFS2 24 25 #define CONFIG_BOOTDELAY -1 26 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" 27 #define CONFIG_ENV_OVERWRITE 1 28 29 #define CONFIG_VERSION_VARIABLE 30 #undef CONFIG_SHOW_BOOT_PROGRESS 31 32 /* SCIF */ 33 #define CONFIG_SCIF_CONSOLE 1 34 #define CONFIG_BAUDRATE 115200 35 #define CONFIG_CONS_SCIF2 1 36 37 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 38 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 39 #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ 40 #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 41 #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ 42 #define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments 43 passed to kernel */ 44 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate 45 settings for this board */ 46 47 /* SDRAM */ 48 #define CONFIG_SYS_SDRAM_BASE (0x8C000000) 49 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) 50 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 51 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) 52 53 /* Flash(NOR) */ 54 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 55 #define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) 56 #define CONFIG_SYS_MAX_FLASH_BANKS (1) 57 #define CONFIG_SYS_MAX_FLASH_SECT (520) 58 59 /* U-Boot setting */ 60 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) 61 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 62 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) 63 /* Size of DRAM reserved for malloc() use */ 64 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 65 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 66 67 #define CONFIG_SYS_FLASH_CFI 68 #define CONFIG_FLASH_CFI_DRIVER 69 #undef CONFIG_SYS_FLASH_QUIET_TEST 70 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 71 /* Timeout for Flash erase operations (in ms) */ 72 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) 73 /* Timeout for Flash write operations (in ms) */ 74 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) 75 /* Timeout for Flash set sector lock bit operations (in ms) */ 76 #define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) 77 /* Timeout for Flash clear lock bit operations (in ms) */ 78 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) 79 /* Use hardware flash sectors protection instead of U-Boot software protection */ 80 #undef CONFIG_SYS_FLASH_PROTECTION 81 #undef CONFIG_SYS_DIRECT_FLASH_TFTP 82 #define CONFIG_ENV_IS_IN_FLASH 83 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 84 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 85 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) 86 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 87 #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 88 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 89 #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 90 91 /* Clock */ 92 #define CONFIG_SYS_CLK_FREQ 66666666 93 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 94 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 95 #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ 96 97 /* Ether */ 98 #define CONFIG_SH_ETHER 1 99 #define CONFIG_SH_ETHER_USE_PORT (1) 100 #define CONFIG_SH_ETHER_PHY_ADDR (0x01) 101 #define CONFIG_PHYLIB 102 #define CONFIG_BITBANGMII 103 #define CONFIG_BITBANGMII_MULTI 104 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII 105 106 #endif /* __SH7763RDP_H */ 107