1 /* 2 * (C) Copyright 2010,2011 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #ifndef __CONFIG_H 25 #define __CONFIG_H 26 27 #include <asm/sizes.h> 28 29 /* LP0 suspend / resume */ 30 #define CONFIG_TEGRA2_LP0 31 #define CONFIG_AES 32 #define CONFIG_TEGRA_PMU 33 #define CONFIG_TPS6586X_POWER 34 #define CONFIG_TEGRA_CLOCK_SCALING 35 36 #include "tegra2-common.h" 37 38 /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ 39 #define CONFIG_DEFAULT_DEVICE_TREE tegra2-seaboard 40 #define CONFIG_OF_CONTROL 41 #define CONFIG_OF_SEPARATE 42 43 /* High-level configuration options */ 44 #define V_PROMPT "Tegra2 (SeaBoard) # " 45 #define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard" 46 47 /* Board-specific serial config */ 48 #define CONFIG_SERIAL_MULTI 49 #define CONFIG_TEGRA2_ENABLE_UARTD 50 #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE 51 52 /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ 53 #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 54 /* 55 * On Seaboard, SPIFLASH is muxed with UART4. The next 5 defines are 56 * needed to work around that design error. 57 */ 58 #define CONFIG_SPI_UART_SWITCH 59 #define CONFIG_SPI_CORRUPTS_UART NV_PA_APB_UARTD_BASE 60 #define CONFIG_SPI_CORRUPTS_UART_NR 3 61 #define CONFIG_SPI_CORRUPTS_UART_DLY 2500 62 #undef CONFIG_CMDLINE_EDITING /* avoid NUL in input buffer */ 63 64 #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD 65 #define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ 66 67 #define CONFIG_BOARD_EARLY_INIT_F 68 69 /* SPI */ 70 #define CONFIG_TEGRA_SPI 71 #define CONFIG_SPI_FLASH 72 #define CONFIG_SPI_FLASH_WINBOND 73 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 74 #define CONFIG_CMD_SPI 75 #define CONFIG_CMD_SF 76 #define CONFIG_SPI_FLASH_SIZE (4 << 20) 77 78 /* I2C */ 79 #define CONFIG_TEGRA_I2C 80 #define CONFIG_SYS_I2C_INIT_BOARD 81 #define CONFIG_I2C_MULTI_BUS 82 #define CONFIG_SYS_MAX_I2C_BUS 4 83 #define CONFIG_SYS_I2C_SPEED 100000 84 #define CONFIG_CMD_I2C 85 86 /* SD/MMC */ 87 #define CONFIG_MMC 88 #define CONFIG_GENERIC_MMC 89 #define CONFIG_TEGRA_MMC 90 #define CONFIG_CMD_MMC 91 92 #define CONFIG_DOS_PARTITION 93 #define CONFIG_EFI_PARTITION 94 #define CONFIG_CMD_EXT2 95 #define CONFIG_CMD_FAT 96 97 /* Environment in SPI */ 98 #define CONFIG_ENV_IS_IN_SPI_FLASH 99 #define CONFIG_ENV_SPI_MAX_HZ 48000000 100 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 101 102 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE 103 #define CONFIG_ENV_OFFSET (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE) 104 105 /* USB Host support */ 106 #define CONFIG_USB_EHCI 107 #define CONFIG_USB_EHCI_TEGRA 108 #define CONFIG_USB_STORAGE 109 #define CONFIG_CMD_USB 110 111 /* USB networking support */ 112 #define CONFIG_USB_HOST_ETHER 113 #define CONFIG_USB_ETHER_ASIX 114 115 /* General networking support */ 116 #define CONFIG_CMD_NET 117 #define CONFIG_CMD_DHCP 118 119 /* Enable keyboard */ 120 #define CONFIG_TEGRA2_KEYBOARD 121 #define CONFIG_KEYBOARD 122 123 #undef TEGRA2_DEVICE_SETTINGS 124 #define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ 125 "stdout=serial\0" \ 126 "stderr=serial\0" 127 128 #include "tegra2-common-post.h" 129 130 #endif /* __CONFIG_H */ 131