1 /* 2 * (C) Copyright 2010,2011 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #ifndef __CONFIG_H 25 #define __CONFIG_H 26 27 #include <asm/sizes.h> 28 29 /* LP0 suspend / resume */ 30 #define CONFIG_TEGRA_LP0 31 #define CONFIG_AES 32 #define CONFIG_TEGRA_PMU 33 #define CONFIG_TPS6586X_POWER 34 #define CONFIG_TEGRA_CLOCK_SCALING 35 36 #include "tegra20-common.h" 37 38 /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ 39 #define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard 40 #define CONFIG_OF_CONTROL 41 #define CONFIG_OF_SEPARATE 42 43 /* High-level configuration options */ 44 #define V_PROMPT "Tegra20 (SeaBoard) # " 45 #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" 46 47 /* Board-specific serial config */ 48 #define CONFIG_TEGRA_ENABLE_UARTD 49 #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE 50 51 /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ 52 #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 53 54 #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD 55 56 #define CONFIG_BOARD_EARLY_INIT_F 57 58 /* I2C */ 59 #define CONFIG_TEGRA_I2C 60 #define CONFIG_SYS_I2C_INIT_BOARD 61 #define CONFIG_I2C_MULTI_BUS 62 #define CONFIG_SYS_MAX_I2C_BUS 4 63 #define CONFIG_SYS_I2C_SPEED 100000 64 #define CONFIG_CMD_I2C 65 66 /* SD/MMC */ 67 #define CONFIG_MMC 68 #define CONFIG_GENERIC_MMC 69 #define CONFIG_TEGRA_MMC 70 #define CONFIG_CMD_MMC 71 72 #define CONFIG_DOS_PARTITION 73 #define CONFIG_EFI_PARTITION 74 #define CONFIG_CMD_EXT2 75 #define CONFIG_CMD_FAT 76 77 /* Environment in eMMC, at the end of 2nd "boot sector" */ 78 #define CONFIG_ENV_IS_IN_MMC 79 #define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) 80 #define CONFIG_SYS_MMC_ENV_DEV 0 81 #define CONFIG_SYS_MMC_ENV_PART 2 82 83 /* USB Host support */ 84 #define CONFIG_USB_EHCI 85 #define CONFIG_USB_EHCI_TEGRA 86 #define CONFIG_USB_STORAGE 87 #define CONFIG_CMD_USB 88 89 /* USB networking support */ 90 #define CONFIG_USB_HOST_ETHER 91 #define CONFIG_USB_ETHER_ASIX 92 93 /* General networking support */ 94 #define CONFIG_CMD_NET 95 #define CONFIG_CMD_DHCP 96 97 /* Enable keyboard */ 98 #define CONFIG_TEGRA_KEYBOARD 99 #define CONFIG_KEYBOARD 100 101 #undef TEGRA_DEVICE_SETTINGS 102 #define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ 103 "stdout=serial\0" \ 104 "stderr=serial\0" 105 106 #include "tegra-common-post.h" 107 108 /* NAND support */ 109 #define CONFIG_CMD_NAND 110 #define CONFIG_TEGRA_NAND 111 112 /* Max number of NAND devices */ 113 #define CONFIG_SYS_MAX_NAND_DEVICE 1 114 115 /* Somewhat oddly, the NAND base address must be a config option */ 116 #define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE 117 #endif /* __CONFIG_H */ 118