xref: /openbmc/u-boot/include/configs/sc_sps_1.h (revision b0cf7339)
1 /*
2  * SchulerControl GmbH, SC_SPS_1 module config
3  *
4  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
5  * on behalf of DENX Software Engineering GmbH
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 #ifndef __CONFIGS_SC_SPS_1_H__
10 #define __CONFIGS_SC_SPS_1_H__
11 
12 /* System configuration */
13 #define CONFIG_MX28				/* i.MX28 SoC */
14 #define MACH_TYPE_SC_SPS_1	4172
15 #define CONFIG_MACH_TYPE	MACH_TYPE_SC_SPS_1
16 
17 /* U-Boot Commands */
18 #define CONFIG_SYS_NO_FLASH
19 
20 /* Memory configuration */
21 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
22 #define PHYS_SDRAM_1			0x40000000	/* Base address */
23 #define PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM */
24 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
25 
26 /* Environment */
27 #define CONFIG_ENV_SIZE			(16 * 1024)
28 #define CONFIG_ENV_IS_IN_MMC
29 
30 /* Environment is in MMC */
31 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
32 #define CONFIG_ENV_OFFSET		(256 * 1024)
33 #define CONFIG_SYS_MMC_ENV_DEV		0
34 #else
35 #define CONFIG_ENV_IS_NOWHERE
36 #endif
37 
38 /* FEC Ethernet on SoC */
39 #ifdef CONFIG_CMD_NET
40 #define CONFIG_FEC_MXC
41 #define CONFIG_PHYLIB
42 #define CONFIG_PHY_SMSC
43 #endif
44 
45 /* USB */
46 #ifdef CONFIG_CMD_USB
47 #define CONFIG_EHCI_MXS_PORT0
48 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
49 #endif
50 
51 /* Booting Linux */
52 #define CONFIG_BOOTFILE		"uImage"
53 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200"
54 #define CONFIG_BOOTCOMMAND	"bootm"
55 #define CONFIG_LOADADDR		0x42000000
56 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
57 
58 /* Extra Environment */
59 #define CONFIG_EXTRA_ENV_SETTINGS					\
60 	"update_sd_firmware_filename=u-boot.sd\0"			\
61 	"update_sd_firmware="		/* Update the SD firmware partition */ \
62 		"if mmc rescan ; then "					\
63 		"if tftp ${update_sd_firmware_filename} ; then "	\
64 		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
65 		"setexpr fw_sz ${fw_sz} + 1 ; "				\
66 		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
67 		"fi ; "							\
68 		"fi\0"
69 
70 /* The rest of the configuration is shared */
71 #include <configs/mxs.h>
72 
73 #endif /* __CONFIGS_SC_SPS_1_H__ */
74