1 /* 2 * Copyright 2007 Wind River Systems <www.windriver.com> 3 * Copyright 2007 Embedded Specialties, Inc. 4 * Joe Hamman <joe.hamman@embeddedspecialties.com> 5 * 6 * Copyright 2006 Freescale Semiconductor. 7 * 8 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) 9 * 10 * See file CREDITS for list of people who contributed to this 11 * project. 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of 16 * the License, or (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 26 * MA 02111-1307 USA 27 */ 28 29 /* 30 * SBC8641D board configuration file 31 * 32 * Make sure you change the MAC address and other network params first, 33 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. 34 */ 35 36 #ifndef __CONFIG_H 37 #define __CONFIG_H 38 39 /* High Level Configuration Options */ 40 #define CONFIG_MPC86xx 1 /* MPC86xx */ 41 #define CONFIG_MPC8641 1 /* MPC8641 specific */ 42 #define CONFIG_SBC8641D 1 /* SBC8641D board specific */ 43 #define CONFIG_MP 1 /* support multiple processors */ 44 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ 45 46 #define CONFIG_SYS_TEXT_BASE 0xfff00000 47 48 #ifdef RUN_DIAG 49 #define CONFIG_SYS_DIAG_ADDR 0xff800000 50 #endif 51 52 #define CONFIG_SYS_RESET_ADDRESS 0xfff00100 53 54 /* 55 * virtual address to be used for temporary mappings. There 56 * should be 128k free at this VA. 57 */ 58 #define CONFIG_SYS_SCRATCH_VA 0xe8000000 59 60 #define CONFIG_SYS_SRIO 61 #define CONFIG_SRIO1 /* SRIO port 1 */ 62 63 #define CONFIG_PCI 1 /* Enable PCIE */ 64 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 65 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 66 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 67 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 68 69 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 70 #define CONFIG_ENV_OVERWRITE 71 72 #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ 73 #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ 74 75 #undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ 76 #undef CONFIG_DDR_ECC /* only for ECC DDR module */ 77 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 78 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 79 #define CONFIG_NUM_DDR_CONTROLLERS 2 80 #define CACHE_LINE_INTERLEAVING 0x20000000 81 #define PAGE_INTERLEAVING 0x21000000 82 #define BANK_INTERLEAVING 0x22000000 83 #define SUPER_BANK_INTERLEAVING 0x23000000 84 85 86 #define CONFIG_ALTIVEC 1 87 88 /* 89 * L2CR setup -- make sure this is right for your board! 90 */ 91 #define CONFIG_SYS_L2 92 #define L2_INIT 0 93 #define L2_ENABLE (L2CR_L2E) 94 95 #ifndef CONFIG_SYS_CLK_FREQ 96 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 97 #endif 98 99 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 100 101 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 102 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ 103 #define CONFIG_SYS_MEMTEST_END 0x00400000 104 105 /* 106 * Base addresses -- Note these are effective addresses where the 107 * actual resources get mapped (not physical addresses) 108 */ 109 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 110 #define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ 111 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 112 113 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 114 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 115 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW 116 117 /* 118 * DDR Setup 119 */ 120 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ 121 #define CONFIG_SYS_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */ 122 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 123 #define CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_DDR_SDRAM_BASE2 124 #define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */ 125 #define CONFIG_VERY_BIG_RAM 126 127 #define CONFIG_NUM_DDR_CONTROLLERS 2 128 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 129 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 130 131 #if defined(CONFIG_SPD_EEPROM) 132 /* 133 * Determine DDR configuration from I2C interface. 134 */ 135 #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ 136 #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ 137 #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ 138 #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ 139 140 #else 141 /* 142 * Manually set up DDR1 & DDR2 parameters 143 */ 144 145 #define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ 146 147 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F 148 #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 149 #define CONFIG_SYS_DDR_CS2_BNDS 0x00000000 150 #define CONFIG_SYS_DDR_CS3_BNDS 0x00000000 151 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 152 #define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 153 #define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000 154 #define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000 155 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 156 #define CONFIG_SYS_DDR_TIMING_0 0x00220802 157 #define CONFIG_SYS_DDR_TIMING_1 0x38377322 158 #define CONFIG_SYS_DDR_TIMING_2 0x002040c7 159 #define CONFIG_SYS_DDR_CFG_1A 0x43008008 160 #define CONFIG_SYS_DDR_CFG_2 0x24401000 161 #define CONFIG_SYS_DDR_MODE_1 0x23c00542 162 #define CONFIG_SYS_DDR_MODE_2 0x00000000 163 #define CONFIG_SYS_DDR_MODE_CTL 0x00000000 164 #define CONFIG_SYS_DDR_INTERVAL 0x05080100 165 #define CONFIG_SYS_DDR_DATA_INIT 0x00000000 166 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 167 #define CONFIG_SYS_DDR_CFG_1B 0xC3008008 168 169 #define CONFIG_SYS_DDR2_CS0_BNDS 0x0010001F 170 #define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000 171 #define CONFIG_SYS_DDR2_CS2_BNDS 0x00000000 172 #define CONFIG_SYS_DDR2_CS3_BNDS 0x00000000 173 #define CONFIG_SYS_DDR2_CS0_CONFIG 0x80010102 174 #define CONFIG_SYS_DDR2_CS1_CONFIG 0x00000000 175 #define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000 176 #define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000 177 #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000 178 #define CONFIG_SYS_DDR2_TIMING_0 0x00220802 179 #define CONFIG_SYS_DDR2_TIMING_1 0x38377322 180 #define CONFIG_SYS_DDR2_TIMING_2 0x002040c7 181 #define CONFIG_SYS_DDR2_CFG_1A 0x43008008 182 #define CONFIG_SYS_DDR2_CFG_2 0x24401000 183 #define CONFIG_SYS_DDR2_MODE_1 0x23c00542 184 #define CONFIG_SYS_DDR2_MODE_2 0x00000000 185 #define CONFIG_SYS_DDR2_MODE_CTL 0x00000000 186 #define CONFIG_SYS_DDR2_INTERVAL 0x05080100 187 #define CONFIG_SYS_DDR2_DATA_INIT 0x00000000 188 #define CONFIG_SYS_DDR2_CLK_CTRL 0x03800000 189 #define CONFIG_SYS_DDR2_CFG_1B 0xC3008008 190 191 192 #endif 193 194 /* #define CONFIG_ID_EEPROM 1 195 #define ID_EEPROM_ADDR 0x57 */ 196 197 /* 198 * The SBC8641D contains 16MB flash space at ff000000. 199 */ 200 #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ 201 202 /* Flash */ 203 #define CONFIG_SYS_BR0_PRELIM 0xff001001 /* port size 16bit */ 204 #define CONFIG_SYS_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */ 205 206 /* 64KB EEPROM */ 207 #define CONFIG_SYS_BR1_PRELIM 0xf0000801 /* port size 16bit */ 208 #define CONFIG_SYS_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */ 209 210 /* EPLD - User switches, board id, LEDs */ 211 #define CONFIG_SYS_BR2_PRELIM 0xf1000801 /* port size 16bit */ 212 #define CONFIG_SYS_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */ 213 214 /* Local bus SDRAM 128MB */ 215 #define CONFIG_SYS_BR3_PRELIM 0xe0001861 /* port size ?bit */ 216 #define CONFIG_SYS_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */ 217 #define CONFIG_SYS_BR4_PRELIM 0xe4001861 /* port size ?bit */ 218 #define CONFIG_SYS_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */ 219 220 /* Disk on Chip (DOC) 128MB */ 221 #define CONFIG_SYS_BR5_PRELIM 0xe8001001 /* port size ?bit */ 222 #define CONFIG_SYS_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */ 223 224 /* LCD */ 225 #define CONFIG_SYS_BR6_PRELIM 0xf4000801 /* port size ?bit */ 226 #define CONFIG_SYS_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ 227 228 /* Control logic & misc peripherals */ 229 #define CONFIG_SYS_BR7_PRELIM 0xf2000801 /* port size ?bit */ 230 #define CONFIG_SYS_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ 231 232 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 233 #define CONFIG_SYS_MAX_FLASH_SECT 131 /* sectors per device */ 234 235 #undef CONFIG_SYS_FLASH_CHECKSUM 236 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 237 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 238 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 239 #define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */ 240 241 #define CONFIG_FLASH_CFI_DRIVER 242 #define CONFIG_SYS_FLASH_CFI 243 #define CONFIG_SYS_WRITE_SWAPPED_DATA 244 #define CONFIG_SYS_FLASH_EMPTY_INFO 245 #define CONFIG_SYS_FLASH_PROTECTION 246 247 #undef CONFIG_CLOCKS_IN_MHZ 248 249 #define CONFIG_SYS_INIT_RAM_LOCK 1 250 #ifndef CONFIG_SYS_INIT_RAM_LOCK 251 #define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ 252 #else 253 #define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ 254 #endif 255 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ 256 257 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 258 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 259 260 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 261 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 262 263 /* Serial Port */ 264 #define CONFIG_CONS_INDEX 1 265 #define CONFIG_SYS_NS16550 266 #define CONFIG_SYS_NS16550_SERIAL 267 #define CONFIG_SYS_NS16550_REG_SIZE 1 268 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 269 270 #define CONFIG_SYS_BAUDRATE_TABLE \ 271 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 272 273 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 274 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 275 276 /* Use the HUSH parser */ 277 #define CONFIG_SYS_HUSH_PARSER 278 #ifdef CONFIG_SYS_HUSH_PARSER 279 #endif 280 281 /* 282 * Pass open firmware flat tree to kernel 283 */ 284 #define CONFIG_OF_LIBFDT 1 285 #define CONFIG_OF_BOARD_SETUP 1 286 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 287 288 /* 289 * I2C 290 */ 291 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 292 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 293 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 294 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 295 #define CONFIG_SYS_I2C_SLAVE 0x7F 296 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 297 #define CONFIG_SYS_I2C_OFFSET 0x3100 298 299 /* 300 * RapidIO MMU 301 */ 302 #define CONFIG_SYS_SRIO1_MEM_BASE 0xc0000000 /* base address */ 303 #define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE 304 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ 305 306 /* 307 * General PCI 308 * Addresses are mapped 1-1. 309 */ 310 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 311 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS 312 #define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS 313 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 314 #define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000 315 #define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS 316 #define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS 317 #define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */ 318 319 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 320 #define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS 321 #define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS 322 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 323 #define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000 324 #define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS 325 #define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS 326 #define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */ 327 328 #if defined(CONFIG_PCI) 329 330 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 331 332 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 333 334 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 335 336 #undef CONFIG_EEPRO100 337 #undef CONFIG_TULIP 338 339 #if !defined(CONFIG_PCI_PNP) 340 #define PCI_ENET0_IOADDR 0xe0000000 341 #define PCI_ENET0_MEMADDR 0xe0000000 342 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ 343 #endif 344 345 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 346 347 #define CONFIG_DOS_PARTITION 348 #undef CONFIG_SCSI_AHCI 349 350 #ifdef CONFIG_SCSI_AHCI 351 #define CONFIG_SATA_ULI5288 352 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 353 #define CONFIG_SYS_SCSI_MAX_LUN 1 354 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 355 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 356 #endif 357 358 #endif /* CONFIG_PCI */ 359 360 #if defined(CONFIG_TSEC_ENET) 361 362 /* #define CONFIG_MII 1 */ /* MII PHY management */ 363 364 #define CONFIG_TSEC1 1 365 #define CONFIG_TSEC1_NAME "eTSEC1" 366 #define CONFIG_TSEC2 1 367 #define CONFIG_TSEC2_NAME "eTSEC2" 368 #define CONFIG_TSEC3 1 369 #define CONFIG_TSEC3_NAME "eTSEC3" 370 #define CONFIG_TSEC4 1 371 #define CONFIG_TSEC4_NAME "eTSEC4" 372 373 #define TSEC1_PHY_ADDR 0x1F 374 #define TSEC2_PHY_ADDR 0x00 375 #define TSEC3_PHY_ADDR 0x01 376 #define TSEC4_PHY_ADDR 0x02 377 #define TSEC1_PHYIDX 0 378 #define TSEC2_PHYIDX 0 379 #define TSEC3_PHYIDX 0 380 #define TSEC4_PHYIDX 0 381 #define TSEC1_FLAGS TSEC_GIGABIT 382 #define TSEC2_FLAGS TSEC_GIGABIT 383 #define TSEC3_FLAGS TSEC_GIGABIT 384 #define TSEC4_FLAGS TSEC_GIGABIT 385 386 #define CONFIG_SYS_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ 387 388 #define CONFIG_ETHPRIME "eTSEC1" 389 390 #endif /* CONFIG_TSEC_ENET */ 391 392 /* 393 * BAT0 2G Cacheable, non-guarded 394 * 0x0000_0000 2G DDR 395 */ 396 #define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) 397 #define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) 398 #define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) 399 #define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U 400 401 /* 402 * BAT1 1G Cache-inhibited, guarded 403 * 0x8000_0000 512M PCI-Express 1 Memory 404 * 0xa000_0000 512M PCI-Express 2 Memory 405 * Changed it for operating from 0xd0000000 406 */ 407 #define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \ 408 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 409 #define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) 410 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 411 #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U 412 413 /* 414 * BAT2 512M Cache-inhibited, guarded 415 * 0xc000_0000 512M RapidIO Memory 416 */ 417 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \ 418 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 419 #define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) 420 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) 421 #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U 422 423 /* 424 * BAT3 4M Cache-inhibited, guarded 425 * 0xf800_0000 4M CCSR 426 */ 427 #define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ 428 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 429 #define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) 430 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) 431 #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U 432 433 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) 434 #define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ 435 | BATL_PP_RW | BATL_CACHEINHIBIT \ 436 | BATL_GUARDEDSTORAGE) 437 #define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ 438 | BATU_BL_1M | BATU_VS | BATU_VP) 439 #define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ 440 | BATL_PP_RW | BATL_CACHEINHIBIT) 441 #define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU 442 #endif 443 444 /* 445 * BAT4 32M Cache-inhibited, guarded 446 * 0xe200_0000 16M PCI-Express 1 I/O 447 * 0xe300_0000 16M PCI-Express 2 I/0 448 * Note that this is at 0xe0000000 449 */ 450 #define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \ 451 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 452 #define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) 453 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 454 #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U 455 456 /* 457 * BAT5 128K Cacheable, non-guarded 458 * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) 459 */ 460 #define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) 461 #define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 462 #define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L 463 #define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U 464 465 /* 466 * BAT6 32M Cache-inhibited, guarded 467 * 0xfe00_0000 32M FLASH 468 */ 469 #define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ 470 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 471 #define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) 472 #define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) 473 #define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U 474 475 /* Map the last 1M of flash where we're running from reset */ 476 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ 477 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 478 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP) 479 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ 480 | BATL_MEMCOHERENCE) 481 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY 482 483 #define CONFIG_SYS_DBAT7L 0x00000000 484 #define CONFIG_SYS_DBAT7U 0x00000000 485 #define CONFIG_SYS_IBAT7L 0x00000000 486 #define CONFIG_SYS_IBAT7U 0x00000000 487 488 /* 489 * Environment 490 */ 491 #define CONFIG_ENV_IS_IN_FLASH 1 492 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) 493 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ 494 #define CONFIG_ENV_SIZE 0x2000 495 496 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 497 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 498 499 #include <config_cmd_default.h> 500 #define CONFIG_CMD_PING 501 #define CONFIG_CMD_I2C 502 #define CONFIG_CMD_REGINFO 503 504 #if defined(CONFIG_PCI) 505 #define CONFIG_CMD_PCI 506 #endif 507 508 #undef CONFIG_WATCHDOG /* watchdog disabled */ 509 510 /* 511 * Miscellaneous configurable options 512 */ 513 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 514 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 515 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 516 517 #if defined(CONFIG_CMD_KGDB) 518 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 519 #else 520 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 521 #endif 522 523 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 524 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 525 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 526 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 527 528 /* 529 * For booting Linux, the board info and command line data 530 * have to be in the first 8 MB of memory, since this is 531 * the maximum mapped by the Linux kernel during initialization. 532 */ 533 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 534 535 /* Cache Configuration */ 536 #define CONFIG_SYS_DCACHE_SIZE 32768 537 #define CONFIG_SYS_CACHELINE_SIZE 32 538 #if defined(CONFIG_CMD_KGDB) 539 #define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ 540 #endif 541 542 #if defined(CONFIG_CMD_KGDB) 543 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 544 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 545 #endif 546 547 /* 548 * Environment Configuration 549 */ 550 551 /* The mac addresses for all ethernet interface */ 552 #if defined(CONFIG_TSEC_ENET) 553 #define CONFIG_ETHADDR 02:E0:0C:00:00:01 554 #define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD 555 #define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD 556 #define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD 557 #endif 558 559 #define CONFIG_HAS_ETH0 1 560 #define CONFIG_HAS_ETH1 1 561 #define CONFIG_HAS_ETH2 1 562 #define CONFIG_HAS_ETH3 1 563 564 #define CONFIG_IPADDR 192.168.0.50 565 566 #define CONFIG_HOSTNAME sbc8641d 567 #define CONFIG_ROOTPATH "/opt/eldk/ppc_74xx" 568 #define CONFIG_BOOTFILE "uImage" 569 570 #define CONFIG_SERVERIP 192.168.0.2 571 #define CONFIG_GATEWAYIP 192.168.0.1 572 #define CONFIG_NETMASK 255.255.255.0 573 574 /* default location for tftp and bootm */ 575 #define CONFIG_LOADADDR 1000000 576 577 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 578 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 579 580 #define CONFIG_BAUDRATE 115200 581 582 #define CONFIG_EXTRA_ENV_SETTINGS \ 583 "netdev=eth0\0" \ 584 "consoledev=ttyS0\0" \ 585 "ramdiskaddr=2000000\0" \ 586 "ramdiskfile=uRamdisk\0" \ 587 "dtbaddr=400000\0" \ 588 "dtbfile=sbc8641d.dtb\0" \ 589 "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ 590 "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ 591 "maxcpus=1" 592 593 #define CONFIG_NFSBOOTCOMMAND \ 594 "setenv bootargs root=/dev/nfs rw " \ 595 "nfsroot=$serverip:$rootpath " \ 596 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 597 "console=$consoledev,$baudrate $othbootargs;" \ 598 "tftp $loadaddr $bootfile;" \ 599 "tftp $dtbaddr $dtbfile;" \ 600 "bootm $loadaddr - $dtbaddr" 601 602 #define CONFIG_RAMBOOTCOMMAND \ 603 "setenv bootargs root=/dev/ram rw " \ 604 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 605 "console=$consoledev,$baudrate $othbootargs;" \ 606 "tftp $ramdiskaddr $ramdiskfile;" \ 607 "tftp $loadaddr $bootfile;" \ 608 "tftp $dtbaddr $dtbfile;" \ 609 "bootm $loadaddr $ramdiskaddr $dtbaddr" 610 611 #define CONFIG_FLASHBOOTCOMMAND \ 612 "setenv bootargs root=/dev/ram rw " \ 613 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 614 "console=$consoledev,$baudrate $othbootargs;" \ 615 "bootm ffd00000 ffb00000 ffa00000" 616 617 #define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND 618 619 #endif /* __CONFIG_H */ 620