1 /* 2 * WindRiver SBC8349 U-Boot configuration file. 3 * Copyright (c) 2006, 2007 Wind River Systems, Inc. 4 * 5 * Paul Gortmaker <paul.gortmaker@windriver.com> 6 * Based on the MPC8349EMDS config. 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27 /* 28 * sbc8349 board configuration file. 29 */ 30 31 #ifndef __CONFIG_H 32 #define __CONFIG_H 33 34 /* 35 * High Level Configuration Options 36 */ 37 #define CONFIG_E300 1 /* E300 Family */ 38 #define CONFIG_MPC83xx 1 /* MPC83xx family */ 39 #define CONFIG_MPC834x 1 /* MPC834x family */ 40 #define CONFIG_MPC8349 1 /* MPC8349 specific */ 41 #define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ 42 43 #define CONFIG_SYS_TEXT_BASE 0xFF800000 44 45 /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ 46 #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ 47 48 /* 49 * The default if PCI isn't enabled, or if no PCI clk setting is given 50 * is 66MHz; this is what the board defaults to when the PCI slot is 51 * physically empty. The board will automatically (i.e w/o jumpers) 52 * clock down to 33MHz if you insert a 33MHz PCI card. 53 */ 54 #ifdef CONFIG_PCI_33M 55 #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ 56 #else /* 66M */ 57 #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ 58 #endif 59 60 #ifndef CONFIG_SYS_CLK_FREQ 61 #ifdef CONFIG_PCI_33M 62 #define CONFIG_SYS_CLK_FREQ 33000000 63 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 64 #else /* 66M */ 65 #define CONFIG_SYS_CLK_FREQ 66000000 66 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 67 #endif 68 #endif 69 70 #undef CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ 71 72 #define CONFIG_SYS_IMMR 0xE0000000 73 74 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 75 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ 76 #define CONFIG_SYS_MEMTEST_END 0x00100000 77 78 /* 79 * DDR Setup 80 */ 81 #undef CONFIG_DDR_ECC /* only for ECC DDR module */ 82 #undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ 83 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 84 #define CONFIG_SYS_83XX_DDR_USES_CS0 /* WRS; Fsl board uses CS2/CS3 */ 85 86 /* 87 * 32-bit data path mode. 88 * 89 * Please note that using this mode for devices with the real density of 64-bit 90 * effectively reduces the amount of available memory due to the effect of 91 * wrapping around while translating address to row/columns, for example in the 92 * 256MB module the upper 128MB get aliased with contents of the lower 93 * 128MB); normally this define should be used for devices with real 32-bit 94 * data path. 95 */ 96 #undef CONFIG_DDR_32BIT 97 98 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 99 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 100 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 101 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ 102 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 103 #define CONFIG_DDR_2T_TIMING 104 105 #if defined(CONFIG_SPD_EEPROM) 106 /* 107 * Determine DDR configuration from I2C interface. 108 */ 109 #define SPD_EEPROM_ADDRESS 0x52 /* DDR DIMM */ 110 111 #else 112 /* 113 * Manually set up DDR parameters 114 * NB: manual DDR setup untested on sbc834x 115 */ 116 #define CONFIG_SYS_DDR_SIZE 256 /* MB */ 117 #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) 118 #define CONFIG_SYS_DDR_TIMING_1 0x36332321 119 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ 120 #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ 121 #define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ 122 123 #if defined(CONFIG_DDR_32BIT) 124 /* set burst length to 8 for 32-bit data path */ 125 #define CONFIG_SYS_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */ 126 #else 127 /* the default burst length is 4 - for 64-bit data path */ 128 #define CONFIG_SYS_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ 129 #endif 130 #endif 131 132 /* 133 * SDRAM on the Local Bus 134 */ 135 #define CONFIG_SYS_LBC_SDRAM_BASE 0x10000000 /* Localbus SDRAM */ 136 #define CONFIG_SYS_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ 137 138 /* 139 * FLASH on the Local Bus 140 */ 141 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 142 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 143 #define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ 144 #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ 145 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ 146 147 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | /* flash Base address */ \ 148 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ 149 BR_V) /* valid */ 150 151 #define CONFIG_SYS_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ 152 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* window base at flash base */ 153 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ 154 155 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 156 #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ 157 158 #undef CONFIG_SYS_FLASH_CHECKSUM 159 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 160 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 161 162 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 163 164 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 165 #define CONFIG_SYS_RAMBOOT 166 #else 167 #undef CONFIG_SYS_RAMBOOT 168 #endif 169 170 #define CONFIG_SYS_INIT_RAM_LOCK 1 171 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ 172 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 173 174 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 175 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 176 177 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 178 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 179 180 /* 181 * Local Bus LCRR and LBCR regs 182 * LCRR: DLL bypass, Clock divider is 4 183 * External Local Bus rate is 184 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 185 */ 186 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 187 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 188 #define CONFIG_SYS_LBC_LBCR 0x00000000 189 190 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ 191 192 #ifdef CONFIG_SYS_LB_SDRAM 193 /* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/ 194 /* 195 * Base Register 2 and Option Register 2 configure SDRAM. 196 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 197 * 198 * For BR2, need: 199 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 200 * port-size = 32-bits = BR2[19:20] = 11 201 * no parity checking = BR2[21:22] = 00 202 * SDRAM for MSEL = BR2[24:26] = 011 203 * Valid = BR[31] = 1 204 * 205 * 0 4 8 12 16 20 24 28 206 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 207 * 208 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into 209 * FIXME: the top 17 bits of BR2. 210 */ 211 212 #define CONFIG_SYS_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */ 213 #define CONFIG_SYS_LBLAWBAR2_PRELIM 0xF0000000 214 #define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64M */ 215 216 /* 217 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 218 * 219 * For OR2, need: 220 * 64MB mask for AM, OR2[0:7] = 1111 1100 221 * XAM, OR2[17:18] = 11 222 * 9 columns OR2[19-21] = 010 223 * 13 rows OR2[23-25] = 100 224 * EAD set for extra time OR[31] = 1 225 * 226 * 0 4 8 12 16 20 24 28 227 * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 228 */ 229 230 #define CONFIG_SYS_OR2_PRELIM 0xFC006901 231 232 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ 233 #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ 234 235 #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFEN \ 236 | LSDMR_BSMA1516 \ 237 | LSDMR_RFCR8 \ 238 | LSDMR_PRETOACT6 \ 239 | LSDMR_ACTTORW3 \ 240 | LSDMR_BL8 \ 241 | LSDMR_WRC3 \ 242 | LSDMR_CL3 \ 243 ) 244 245 /* 246 * SDRAM Controller configuration sequence. 247 */ 248 #define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) 249 #define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) 250 #define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) 251 #define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) 252 #define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) 253 #endif 254 255 /* 256 * Serial Port 257 */ 258 #define CONFIG_CONS_INDEX 1 259 #define CONFIG_SYS_NS16550 260 #define CONFIG_SYS_NS16550_SERIAL 261 #define CONFIG_SYS_NS16550_REG_SIZE 1 262 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 263 264 #define CONFIG_SYS_BAUDRATE_TABLE \ 265 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 266 267 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 268 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 269 270 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 271 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 272 /* Use the HUSH parser */ 273 #define CONFIG_SYS_HUSH_PARSER 274 #ifdef CONFIG_SYS_HUSH_PARSER 275 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 276 #endif 277 278 /* pass open firmware flat tree */ 279 #define CONFIG_OF_LIBFDT 1 280 #define CONFIG_OF_BOARD_SETUP 1 281 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 282 283 /* I2C */ 284 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 285 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 286 #define CONFIG_FSL_I2C 287 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 288 #define CONFIG_SYS_I2C_SLAVE 0x7F 289 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 290 #define CONFIG_SYS_I2C1_OFFSET 0x3000 291 #define CONFIG_SYS_I2C2_OFFSET 0x3100 292 #define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C2_OFFSET 293 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */ 294 295 /* TSEC */ 296 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 297 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) 298 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 299 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) 300 301 /* 302 * General PCI 303 * Addresses are mapped 1-1. 304 */ 305 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 306 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 307 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 308 #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 309 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 310 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 311 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 312 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 313 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 314 315 #define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 316 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 317 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 318 #define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 319 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 320 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 321 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 322 #define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 323 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ 324 325 #if defined(CONFIG_PCI) 326 327 #define PCI_64BIT 328 #define PCI_ONE_PCI1 329 #if defined(PCI_64BIT) 330 #undef PCI_ALL_PCI1 331 #undef PCI_TWO_PCI1 332 #undef PCI_ONE_PCI1 333 #endif 334 335 #define CONFIG_NET_MULTI 336 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 337 338 #undef CONFIG_EEPRO100 339 #undef CONFIG_TULIP 340 341 #if !defined(CONFIG_PCI_PNP) 342 #define PCI_ENET0_IOADDR 0xFIXME 343 #define PCI_ENET0_MEMADDR 0xFIXME 344 #define PCI_IDSEL_NUMBER 0xFIXME 345 #endif 346 347 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 348 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ 349 350 #endif /* CONFIG_PCI */ 351 352 /* 353 * TSEC configuration 354 */ 355 #define CONFIG_TSEC_ENET /* TSEC ethernet support */ 356 357 #if defined(CONFIG_TSEC_ENET) 358 #ifndef CONFIG_NET_MULTI 359 #define CONFIG_NET_MULTI 1 360 #endif 361 362 #define CONFIG_TSEC1 1 363 #define CONFIG_TSEC1_NAME "TSEC0" 364 #define CONFIG_TSEC2 1 365 #define CONFIG_TSEC2_NAME "TSEC1" 366 #define CONFIG_PHY_BCM5421S 1 367 #define TSEC1_PHY_ADDR 0x19 368 #define TSEC2_PHY_ADDR 0x1a 369 #define TSEC1_PHYIDX 0 370 #define TSEC2_PHYIDX 0 371 #define TSEC1_FLAGS TSEC_GIGABIT 372 #define TSEC2_FLAGS TSEC_GIGABIT 373 374 /* Options are: TSEC[0-1] */ 375 #define CONFIG_ETHPRIME "TSEC0" 376 377 #endif /* CONFIG_TSEC_ENET */ 378 379 /* 380 * Environment 381 */ 382 #ifndef CONFIG_SYS_RAMBOOT 383 #define CONFIG_ENV_IS_IN_FLASH 1 384 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) 385 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 386 #define CONFIG_ENV_SIZE 0x2000 387 388 /* Address and size of Redundant Environment Sector */ 389 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 390 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 391 392 #else 393 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 394 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 395 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 396 #define CONFIG_ENV_SIZE 0x2000 397 #endif 398 399 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 400 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 401 402 403 /* 404 * BOOTP options 405 */ 406 #define CONFIG_BOOTP_BOOTFILESIZE 407 #define CONFIG_BOOTP_BOOTPATH 408 #define CONFIG_BOOTP_GATEWAY 409 #define CONFIG_BOOTP_HOSTNAME 410 411 412 /* 413 * Command line configuration. 414 */ 415 #include <config_cmd_default.h> 416 417 #define CONFIG_CMD_I2C 418 #define CONFIG_CMD_MII 419 #define CONFIG_CMD_PING 420 421 #if defined(CONFIG_PCI) 422 #define CONFIG_CMD_PCI 423 #endif 424 425 #if defined(CONFIG_SYS_RAMBOOT) 426 #undef CONFIG_CMD_SAVEENV 427 #undef CONFIG_CMD_LOADS 428 #endif 429 430 431 #undef CONFIG_WATCHDOG /* watchdog disabled */ 432 433 /* 434 * Miscellaneous configurable options 435 */ 436 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 437 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 438 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 439 440 #if defined(CONFIG_CMD_KGDB) 441 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 442 #else 443 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 444 #endif 445 446 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 447 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 448 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 449 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 450 451 /* 452 * For booting Linux, the board info and command line data 453 * have to be in the first 256 MB of memory, since this is 454 * the maximum mapped by the Linux kernel during initialization. 455 */ 456 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ 457 458 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ 459 460 #if 1 /*528/264*/ 461 #define CONFIG_SYS_HRCW_LOW (\ 462 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 463 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 464 HRCWL_CSB_TO_CLKIN |\ 465 HRCWL_VCO_1X2 |\ 466 HRCWL_CORE_TO_CSB_2X1) 467 #elif 0 /*396/132*/ 468 #define CONFIG_SYS_HRCW_LOW (\ 469 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 470 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 471 HRCWL_CSB_TO_CLKIN |\ 472 HRCWL_VCO_1X4 |\ 473 HRCWL_CORE_TO_CSB_3X1) 474 #elif 0 /*264/132*/ 475 #define CONFIG_SYS_HRCW_LOW (\ 476 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 477 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 478 HRCWL_CSB_TO_CLKIN |\ 479 HRCWL_VCO_1X4 |\ 480 HRCWL_CORE_TO_CSB_2X1) 481 #elif 0 /*132/132*/ 482 #define CONFIG_SYS_HRCW_LOW (\ 483 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 484 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 485 HRCWL_CSB_TO_CLKIN |\ 486 HRCWL_VCO_1X4 |\ 487 HRCWL_CORE_TO_CSB_1X1) 488 #elif 0 /*264/264 */ 489 #define CONFIG_SYS_HRCW_LOW (\ 490 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 491 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 492 HRCWL_CSB_TO_CLKIN |\ 493 HRCWL_VCO_1X4 |\ 494 HRCWL_CORE_TO_CSB_1X1) 495 #endif 496 497 #if defined(PCI_64BIT) 498 #define CONFIG_SYS_HRCW_HIGH (\ 499 HRCWH_PCI_HOST |\ 500 HRCWH_64_BIT_PCI |\ 501 HRCWH_PCI1_ARBITER_ENABLE |\ 502 HRCWH_PCI2_ARBITER_DISABLE |\ 503 HRCWH_CORE_ENABLE |\ 504 HRCWH_FROM_0X00000100 |\ 505 HRCWH_BOOTSEQ_DISABLE |\ 506 HRCWH_SW_WATCHDOG_DISABLE |\ 507 HRCWH_ROM_LOC_LOCAL_16BIT |\ 508 HRCWH_TSEC1M_IN_GMII |\ 509 HRCWH_TSEC2M_IN_GMII ) 510 #else 511 #define CONFIG_SYS_HRCW_HIGH (\ 512 HRCWH_PCI_HOST |\ 513 HRCWH_32_BIT_PCI |\ 514 HRCWH_PCI1_ARBITER_ENABLE |\ 515 HRCWH_PCI2_ARBITER_ENABLE |\ 516 HRCWH_CORE_ENABLE |\ 517 HRCWH_FROM_0X00000100 |\ 518 HRCWH_BOOTSEQ_DISABLE |\ 519 HRCWH_SW_WATCHDOG_DISABLE |\ 520 HRCWH_ROM_LOC_LOCAL_16BIT |\ 521 HRCWH_TSEC1M_IN_GMII |\ 522 HRCWH_TSEC2M_IN_GMII ) 523 #endif 524 525 /* System IO Config */ 526 #define CONFIG_SYS_SICRH 0 527 #define CONFIG_SYS_SICRL SICRL_LDP_A 528 529 #define CONFIG_SYS_HID0_INIT 0x000000000 530 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 531 HID0_ENABLE_INSTRUCTION_CACHE) 532 533 /* #define CONFIG_SYS_HID0_FINAL (\ 534 HID0_ENABLE_INSTRUCTION_CACHE |\ 535 HID0_ENABLE_M_BIT |\ 536 HID0_ENABLE_ADDRESS_BROADCAST ) */ 537 538 539 #define CONFIG_SYS_HID2 HID2_HBE 540 541 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 542 543 /* DDR @ 0x00000000 */ 544 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 545 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 546 547 /* PCI @ 0x80000000 */ 548 #ifdef CONFIG_PCI 549 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 550 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 551 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 552 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 553 #else 554 #define CONFIG_SYS_IBAT1L (0) 555 #define CONFIG_SYS_IBAT1U (0) 556 #define CONFIG_SYS_IBAT2L (0) 557 #define CONFIG_SYS_IBAT2U (0) 558 #endif 559 560 #ifdef CONFIG_MPC83XX_PCI2 561 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 562 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 563 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 564 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 565 #else 566 #define CONFIG_SYS_IBAT3L (0) 567 #define CONFIG_SYS_IBAT3U (0) 568 #define CONFIG_SYS_IBAT4L (0) 569 #define CONFIG_SYS_IBAT4U (0) 570 #endif 571 572 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ 573 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 574 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) 575 576 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 577 #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \ 578 BATL_GUARDEDSTORAGE) 579 #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) 580 581 #define CONFIG_SYS_IBAT7L (0) 582 #define CONFIG_SYS_IBAT7U (0) 583 584 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 585 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 586 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 587 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 588 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 589 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 590 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 591 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 592 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 593 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 594 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 595 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 596 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 597 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 598 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 599 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 600 601 #if defined(CONFIG_CMD_KGDB) 602 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 603 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 604 #endif 605 606 /* 607 * Environment Configuration 608 */ 609 #define CONFIG_ENV_OVERWRITE 610 611 #if defined(CONFIG_TSEC_ENET) 612 #define CONFIG_HAS_ETH0 613 #define CONFIG_HAS_ETH1 614 #endif 615 616 #define CONFIG_HOSTNAME SBC8349 617 #define CONFIG_ROOTPATH /tftpboot/rootfs 618 #define CONFIG_BOOTFILE uImage 619 620 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 621 622 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 623 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 624 625 #define CONFIG_BAUDRATE 115200 626 627 #define CONFIG_EXTRA_ENV_SETTINGS \ 628 "netdev=eth0\0" \ 629 "hostname=sbc8349\0" \ 630 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 631 "nfsroot=${serverip}:${rootpath}\0" \ 632 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 633 "addip=setenv bootargs ${bootargs} " \ 634 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 635 ":${hostname}:${netdev}:off panic=1\0" \ 636 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ 637 "flash_nfs=run nfsargs addip addtty;" \ 638 "bootm ${kernel_addr}\0" \ 639 "flash_self=run ramargs addip addtty;" \ 640 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 641 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ 642 "bootm\0" \ 643 "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0" \ 644 "update=protect off ff800000 ff83ffff; " \ 645 "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \ 646 "upd=run load update\0" \ 647 "fdtaddr=780000\0" \ 648 "fdtfile=sbc8349.dtb\0" \ 649 "" 650 651 #define CONFIG_NFSBOOTCOMMAND \ 652 "setenv bootargs root=/dev/nfs rw " \ 653 "nfsroot=$serverip:$rootpath " \ 654 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 655 "console=$consoledev,$baudrate $othbootargs;" \ 656 "tftp $loadaddr $bootfile;" \ 657 "tftp $fdtaddr $fdtfile;" \ 658 "bootm $loadaddr - $fdtaddr" 659 660 #define CONFIG_RAMBOOTCOMMAND \ 661 "setenv bootargs root=/dev/ram rw " \ 662 "console=$consoledev,$baudrate $othbootargs;" \ 663 "tftp $ramdiskaddr $ramdiskfile;" \ 664 "tftp $loadaddr $bootfile;" \ 665 "tftp $fdtaddr $fdtfile;" \ 666 "bootm $loadaddr $ramdiskaddr $fdtaddr" 667 668 #define CONFIG_BOOTCOMMAND "run flash_self" 669 670 #endif /* __CONFIG_H */ 671