xref: /openbmc/u-boot/include/configs/sama5d4ek.h (revision ee7bb5be)
1 /*
2  * Configuration settings for the SAMA5D4EK board.
3  *
4  * Copyright (C) 2014 Atmel
5  *		      Bo Shen <voice.shen@atmel.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 /* No NOR flash, this definition should put before common header */
14 #define CONFIG_SYS_NO_FLASH
15 
16 #include "at91-sama5_common.h"
17 
18 /* serial console */
19 #define CONFIG_ATMEL_USART
20 #define CONFIG_USART_BASE		ATMEL_BASE_USART3
21 #define	CONFIG_USART_ID			ATMEL_ID_USART3
22 
23 /* SDRAM */
24 #define CONFIG_NR_DRAM_BANKS		1
25 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
26 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
27 
28 #ifdef CONFIG_SPL_BUILD
29 #define CONFIG_SYS_INIT_SP_ADDR		0x210000
30 #else
31 #define CONFIG_SYS_INIT_SP_ADDR \
32 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
33 #endif
34 
35 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
36 
37 /* SerialFlash */
38 
39 #ifdef CONFIG_CMD_SF
40 #define CONFIG_ATMEL_SPI
41 #define CONFIG_ATMEL_SPI0
42 #define CONFIG_SF_DEFAULT_BUS		0
43 #define CONFIG_SF_DEFAULT_CS		0
44 #define CONFIG_SF_DEFAULT_SPEED		30000000
45 #endif
46 
47 /* NAND flash */
48 #define CONFIG_CMD_NAND
49 
50 #ifdef CONFIG_CMD_NAND
51 #define CONFIG_NAND_ATMEL
52 #define CONFIG_SYS_MAX_NAND_DEVICE	1
53 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
54 /* our ALE is AD21 */
55 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
56 /* our CLE is AD22 */
57 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
58 #define CONFIG_SYS_NAND_ONFI_DETECTION
59 /* PMECC & PMERRLOC */
60 #define CONFIG_ATMEL_NAND_HWECC
61 #define CONFIG_ATMEL_NAND_HW_PMECC
62 #endif
63 
64 /* MMC */
65 
66 #ifdef CONFIG_CMD_MMC
67 #define CONFIG_MMC
68 #define CONFIG_GENERIC_MMC
69 #define CONFIG_GENERIC_ATMEL_MCI
70 #define ATMEL_BASE_MMCI			ATMEL_BASE_MCI1
71 #endif
72 
73 /* USB */
74 
75 #ifdef CONFIG_CMD_USB
76 #define CONFIG_USB_EHCI
77 #define CONFIG_USB_EHCI_ATMEL
78 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
79 #define CONFIG_USB_STORAGE
80 #endif
81 
82 /* USB device */
83 #define CONFIG_USB_ETHER
84 #define CONFIG_USB_ETH_RNDIS
85 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D4EK"
86 
87 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
88 #define CONFIG_DOS_PARTITION
89 #endif
90 
91 /* Ethernet Hardware */
92 #define CONFIG_MACB
93 #define CONFIG_RMII
94 #define CONFIG_NET_RETRY_COUNT		20
95 #define CONFIG_MACB_SEARCH_PHY
96 
97 /* LCD */
98 #define CONFIG_LCD
99 #define LCD_BPP				LCD_COLOR16
100 #define LCD_OUTPUT_BPP                  18
101 #define CONFIG_LCD_LOGO
102 #define CONFIG_LCD_INFO
103 #define CONFIG_LCD_INFO_BELOW_LOGO
104 #define CONFIG_SYS_WHITE_ON_BLACK
105 #define CONFIG_ATMEL_HLCD
106 #define CONFIG_ATMEL_LCD_RGB565
107 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
108 
109 #ifdef CONFIG_SYS_USE_SERIALFLASH
110 /* override the bootcmd, bootargs and other configuration for spi flash env*/
111 #elif CONFIG_SYS_USE_NANDFLASH
112 /* override the bootcmd, bootargs and other configuration for nandflash env*/
113 #elif CONFIG_SYS_USE_MMC
114 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
115 #endif
116 
117 /* SPL */
118 #define CONFIG_SPL_FRAMEWORK
119 #define CONFIG_SPL_TEXT_BASE		0x200000
120 #define CONFIG_SPL_MAX_SIZE		0x10000
121 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
122 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
123 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
124 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
125 
126 #define CONFIG_SPL_LIBCOMMON_SUPPORT
127 #define CONFIG_SPL_LIBGENERIC_SUPPORT
128 #define CONFIG_SPL_GPIO_SUPPORT
129 #define CONFIG_SPL_SERIAL_SUPPORT
130 
131 #define CONFIG_SPL_BOARD_INIT
132 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
133 
134 #ifdef CONFIG_SYS_USE_MMC
135 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
136 #define CONFIG_SPL_MMC_SUPPORT
137 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
138 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
139 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
140 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
141 #define CONFIG_SPL_FAT_SUPPORT
142 #define CONFIG_SPL_LIBDISK_SUPPORT
143 
144 #elif CONFIG_SYS_USE_NANDFLASH
145 #define CONFIG_SPL_NAND_SUPPORT
146 #define CONFIG_SPL_NAND_DRIVERS
147 #define CONFIG_SPL_NAND_BASE
148 #define CONFIG_PMECC_CAP		8
149 #define CONFIG_PMECC_SECTOR_SIZE	512
150 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
151 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
152 #define CONFIG_SYS_NAND_PAGE_SIZE	0x1000
153 #define CONFIG_SYS_NAND_PAGE_COUNT	64
154 #define CONFIG_SYS_NAND_OOBSIZE		224
155 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x40000
156 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
157 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
158 
159 #elif CONFIG_SYS_USE_SERIALFLASH
160 #define CONFIG_SPL_SPI_SUPPORT
161 #define CONFIG_SPL_SPI_FLASH_SUPPORT
162 #define CONFIG_SPL_SPI_LOAD
163 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
164 
165 #endif
166 #endif
167