1 /* 2 * Configuration settings for the SAMA5D4EK board. 3 * 4 * Copyright (C) 2014 Atmel 5 * Bo Shen <voice.shen@atmel.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* No NOR flash, this definition should put before common header */ 14 #define CONFIG_SYS_NO_FLASH 15 16 #include "at91-sama5_common.h" 17 18 /* serial console */ 19 #define CONFIG_ATMEL_USART 20 #define CONFIG_USART_BASE ATMEL_BASE_USART3 21 #define CONFIG_USART_ID ATMEL_ID_USART3 22 23 /* SDRAM */ 24 #define CONFIG_NR_DRAM_BANKS 1 25 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS 26 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 27 28 #ifdef CONFIG_SPL_BUILD 29 #define CONFIG_SYS_INIT_SP_ADDR 0x210000 30 #else 31 #define CONFIG_SYS_INIT_SP_ADDR \ 32 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 33 #endif 34 35 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 36 37 /* SerialFlash */ 38 #define CONFIG_CMD_SF 39 40 #ifdef CONFIG_CMD_SF 41 #define CONFIG_ATMEL_SPI 42 #define CONFIG_ATMEL_SPI0 43 #define CONFIG_SF_DEFAULT_BUS 0 44 #define CONFIG_SF_DEFAULT_CS 0 45 #define CONFIG_SF_DEFAULT_SPEED 30000000 46 #endif 47 48 /* NAND flash */ 49 #define CONFIG_CMD_NAND 50 51 #ifdef CONFIG_CMD_NAND 52 #define CONFIG_NAND_ATMEL 53 #define CONFIG_SYS_MAX_NAND_DEVICE 1 54 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 55 /* our ALE is AD21 */ 56 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 57 /* our CLE is AD22 */ 58 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 59 #define CONFIG_SYS_NAND_ONFI_DETECTION 60 /* PMECC & PMERRLOC */ 61 #define CONFIG_ATMEL_NAND_HWECC 62 #define CONFIG_ATMEL_NAND_HW_PMECC 63 #endif 64 65 /* MMC */ 66 #define CONFIG_CMD_MMC 67 68 #ifdef CONFIG_CMD_MMC 69 #define CONFIG_MMC 70 #define CONFIG_GENERIC_MMC 71 #define CONFIG_GENERIC_ATMEL_MCI 72 #define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 73 #endif 74 75 /* USB */ 76 #define CONFIG_CMD_USB 77 78 #ifdef CONFIG_CMD_USB 79 #define CONFIG_USB_EHCI 80 #define CONFIG_USB_EHCI_ATMEL 81 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 82 #define CONFIG_USB_STORAGE 83 #endif 84 85 /* USB device */ 86 #define CONFIG_USB_GADGET_DUALSPEED 87 #define CONFIG_USB_GADGET_ATMEL_USBA 88 #define CONFIG_USB_ETHER 89 #define CONFIG_USB_ETH_RNDIS 90 #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" 91 92 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) 93 #define CONFIG_CMD_FAT 94 #define CONFIG_DOS_PARTITION 95 #endif 96 97 /* Ethernet Hardware */ 98 #define CONFIG_MACB 99 #define CONFIG_RMII 100 #define CONFIG_NET_RETRY_COUNT 20 101 #define CONFIG_MACB_SEARCH_PHY 102 103 /* LCD */ 104 #define CONFIG_LCD 105 #define LCD_BPP LCD_COLOR16 106 #define LCD_OUTPUT_BPP 18 107 #define CONFIG_LCD_LOGO 108 #define CONFIG_LCD_INFO 109 #define CONFIG_LCD_INFO_BELOW_LOGO 110 #define CONFIG_SYS_WHITE_ON_BLACK 111 #define CONFIG_ATMEL_HLCD 112 #define CONFIG_ATMEL_LCD_RGB565 113 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 114 115 #ifdef CONFIG_SYS_USE_SERIALFLASH 116 /* override the bootcmd, bootargs and other configuration for spi flash env*/ 117 #elif CONFIG_SYS_USE_NANDFLASH 118 /* override the bootcmd, bootargs and other configuration for nandflash env*/ 119 #elif CONFIG_SYS_USE_MMC 120 /* override the bootcmd, bootargs and other configuration for sd/mmc env */ 121 #endif 122 123 /* SPL */ 124 #define CONFIG_SPL_FRAMEWORK 125 #define CONFIG_SPL_TEXT_BASE 0x200000 126 #define CONFIG_SPL_MAX_SIZE 0x10000 127 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 128 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 129 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 130 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 131 132 #define CONFIG_SPL_LIBCOMMON_SUPPORT 133 #define CONFIG_SPL_LIBGENERIC_SUPPORT 134 #define CONFIG_SPL_GPIO_SUPPORT 135 #define CONFIG_SPL_SERIAL_SUPPORT 136 137 #define CONFIG_SPL_BOARD_INIT 138 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 139 140 #ifdef CONFIG_SYS_USE_MMC 141 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds 142 #define CONFIG_SPL_MMC_SUPPORT 143 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 144 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 145 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 146 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 147 #define CONFIG_SPL_FAT_SUPPORT 148 #define CONFIG_SPL_LIBDISK_SUPPORT 149 150 #elif CONFIG_SYS_USE_NANDFLASH 151 #define CONFIG_SPL_NAND_SUPPORT 152 #define CONFIG_SPL_NAND_DRIVERS 153 #define CONFIG_SPL_NAND_BASE 154 #define CONFIG_PMECC_CAP 8 155 #define CONFIG_PMECC_SECTOR_SIZE 512 156 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 157 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 158 #define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 159 #define CONFIG_SYS_NAND_PAGE_COUNT 64 160 #define CONFIG_SYS_NAND_OOBSIZE 224 161 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 162 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 163 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER 164 165 #elif CONFIG_SYS_USE_SERIALFLASH 166 #define CONFIG_SPL_SPI_SUPPORT 167 #define CONFIG_SPL_SPI_FLASH_SUPPORT 168 #define CONFIG_SPL_SPI_LOAD 169 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 170 171 #endif 172 #endif 173