1 /* 2 * Configuration settings for the SAMA5D4 Xplained ultra board. 3 * 4 * Copyright (C) 2014 Atmel 5 * Bo Shen <voice.shen@atmel.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include "at91-sama5_common.h" 14 15 /* SDRAM */ 16 #define CONFIG_NR_DRAM_BANKS 1 17 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS 18 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 19 20 #ifdef CONFIG_SPL_BUILD 21 #define CONFIG_SYS_INIT_SP_ADDR 0x218000 22 #else 23 #define CONFIG_SYS_INIT_SP_ADDR \ 24 (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) 25 #endif 26 27 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 28 29 #ifdef CONFIG_CMD_SF 30 #define CONFIG_SF_DEFAULT_SPEED 30000000 31 #endif 32 33 /* NAND flash */ 34 #define CONFIG_CMD_NAND 35 36 #ifdef CONFIG_CMD_NAND 37 #define CONFIG_NAND_ATMEL 38 #define CONFIG_SYS_MAX_NAND_DEVICE 1 39 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 40 /* our ALE is AD21 */ 41 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 42 /* our CLE is AD22 */ 43 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 44 #define CONFIG_SYS_NAND_ONFI_DETECTION 45 /* PMECC & PMERRLOC */ 46 #define CONFIG_ATMEL_NAND_HWECC 47 #define CONFIG_ATMEL_NAND_HW_PMECC 48 #endif 49 50 /* LCD */ 51 #ifdef CONFIG_LCD 52 #define LCD_BPP LCD_COLOR16 53 #define LCD_OUTPUT_BPP 24 54 #define CONFIG_LCD_LOGO 55 #define CONFIG_LCD_INFO 56 #define CONFIG_LCD_INFO_BELOW_LOGO 57 #define CONFIG_ATMEL_HLCD 58 #define CONFIG_ATMEL_LCD_RGB565 59 #endif 60 61 #ifdef CONFIG_SYS_USE_SERIALFLASH 62 /* override the bootcmd, bootargs and other configuration for spi flash env */ 63 #elif CONFIG_SYS_USE_NANDFLASH 64 /* override the bootcmd, bootargs and other configuration for nandflash env */ 65 #elif CONFIG_SYS_USE_MMC 66 /* override the bootcmd, bootargs and other configuration for sd/mmc env */ 67 #endif 68 69 /* SPL */ 70 #define CONFIG_SPL_FRAMEWORK 71 #define CONFIG_SPL_TEXT_BASE 0x200000 72 #define CONFIG_SPL_MAX_SIZE 0x18000 73 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 74 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 75 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 76 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 77 78 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 79 80 #ifdef CONFIG_SYS_USE_MMC 81 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds 82 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 83 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 84 85 #elif CONFIG_SYS_USE_NANDFLASH 86 #define CONFIG_SPL_NAND_DRIVERS 87 #define CONFIG_SPL_NAND_BASE 88 #define CONFIG_PMECC_CAP 8 89 #define CONFIG_PMECC_SECTOR_SIZE 512 90 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 91 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 92 #define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 93 #define CONFIG_SYS_NAND_PAGE_COUNT 64 94 #define CONFIG_SYS_NAND_OOBSIZE 224 95 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 96 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 97 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER 98 99 #elif CONFIG_SYS_USE_SERIALFLASH 100 #define CONFIG_SPL_SPI_LOAD 101 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 102 103 #endif 104 #endif 105