1 /*
2  * Configuration settings for the SAMA5D4 Xplained ultra board.
3  *
4  * Copyright (C) 2014 Atmel
5  *		      Bo Shen <voice.shen@atmel.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 /* No NOR flash, this definition should put before common header */
14 #define CONFIG_SYS_NO_FLASH
15 
16 #include "at91-sama5_common.h"
17 
18 /* serial console */
19 #define CONFIG_ATMEL_USART
20 #define CONFIG_USART_BASE		ATMEL_BASE_USART3
21 #define CONFIG_USART_ID			ATMEL_ID_USART3
22 
23 /* SDRAM */
24 #define CONFIG_NR_DRAM_BANKS		1
25 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
26 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
27 
28 #ifdef CONFIG_SPL_BUILD
29 #define CONFIG_SYS_INIT_SP_ADDR		0x210000
30 #else
31 #define CONFIG_SYS_INIT_SP_ADDR \
32 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
33 #endif
34 
35 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
36 
37 /* SerialFlash */
38 
39 #ifdef CONFIG_CMD_SF
40 #define CONFIG_ATMEL_SPI
41 #define CONFIG_ATMEL_SPI0
42 #define CONFIG_SF_DEFAULT_BUS		0
43 #define CONFIG_SF_DEFAULT_CS		0
44 #define CONFIG_SF_DEFAULT_SPEED		30000000
45 #endif
46 
47 /* NAND flash */
48 #define CONFIG_CMD_NAND
49 
50 #ifdef CONFIG_CMD_NAND
51 #define CONFIG_NAND_ATMEL
52 #define CONFIG_SYS_MAX_NAND_DEVICE	1
53 #define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
54 /* our ALE is AD21 */
55 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
56 /* our CLE is AD22 */
57 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
58 #define CONFIG_SYS_NAND_ONFI_DETECTION
59 /* PMECC & PMERRLOC */
60 #define CONFIG_ATMEL_NAND_HWECC
61 #define CONFIG_ATMEL_NAND_HW_PMECC
62 #endif
63 
64 /* MMC */
65 
66 #ifdef CONFIG_CMD_MMC
67 #define CONFIG_GENERIC_MMC
68 #define CONFIG_GENERIC_ATMEL_MCI
69 #define ATMEL_BASE_MMCI			ATMEL_BASE_MCI1
70 #endif
71 
72 /* USB */
73 
74 #ifdef CONFIG_CMD_USB
75 #define CONFIG_USB_EHCI
76 #define CONFIG_USB_EHCI_ATMEL
77 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
78 #endif
79 
80 /* USB device */
81 #define CONFIG_USB_ETHER
82 #define CONFIG_USB_ETH_RNDIS
83 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D4EK"
84 
85 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
86 #define CONFIG_DOS_PARTITION
87 #endif
88 
89 /* Ethernet Hardware */
90 #define CONFIG_MACB
91 #define CONFIG_RMII
92 #define CONFIG_NET_RETRY_COUNT		20
93 #define CONFIG_MACB_SEARCH_PHY
94 
95 /* LCD */
96 #ifdef CONFIG_LCD
97 #define LCD_BPP				LCD_COLOR16
98 #define LCD_OUTPUT_BPP                  24
99 #define CONFIG_LCD_LOGO
100 #define CONFIG_LCD_INFO
101 #define CONFIG_LCD_INFO_BELOW_LOGO
102 #define CONFIG_SYS_WHITE_ON_BLACK
103 #define CONFIG_ATMEL_HLCD
104 #define CONFIG_ATMEL_LCD_RGB565
105 #endif
106 
107 #ifdef CONFIG_SYS_USE_SERIALFLASH
108 /* override the bootcmd, bootargs and other configuration for spi flash env */
109 #elif CONFIG_SYS_USE_NANDFLASH
110 /* override the bootcmd, bootargs and other configuration for nandflash env */
111 #elif CONFIG_SYS_USE_MMC
112 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
113 #endif
114 
115 /* SPL */
116 #define CONFIG_SPL_FRAMEWORK
117 #define CONFIG_SPL_TEXT_BASE		0x200000
118 #define CONFIG_SPL_MAX_SIZE		0x10000
119 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
120 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
121 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
122 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
123 
124 #define CONFIG_SPL_BOARD_INIT
125 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
126 
127 #ifdef CONFIG_SYS_USE_MMC
128 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
129 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
130 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
131 
132 #elif CONFIG_SYS_USE_NANDFLASH
133 #define CONFIG_SPL_NAND_DRIVERS
134 #define CONFIG_SPL_NAND_BASE
135 #define CONFIG_PMECC_CAP		8
136 #define CONFIG_PMECC_SECTOR_SIZE	512
137 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
138 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
139 #define CONFIG_SYS_NAND_PAGE_SIZE	0x1000
140 #define CONFIG_SYS_NAND_PAGE_COUNT	64
141 #define CONFIG_SYS_NAND_OOBSIZE		224
142 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x40000
143 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
144 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
145 
146 #elif CONFIG_SYS_USE_SERIALFLASH
147 #define CONFIG_SPL_SPI_LOAD
148 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
149 
150 #endif
151 #endif
152