1 /* 2 * Configuration settings for the SAMA5D3 Xplained board. 3 * 4 * Copyright (C) 2014 Atmel Corporation 5 * Bo Shen <voice.shen@atmel.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* No NOR flash, this definition should put before common header */ 14 #define CONFIG_SYS_NO_FLASH 15 16 #include "at91-sama5_common.h" 17 18 /* serial console */ 19 #define CONFIG_ATMEL_USART 20 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 21 #define CONFIG_USART_ID ATMEL_ID_DBGU 22 23 /* 24 * This needs to be defined for the OHCI code to work but it is defined as 25 * ATMEL_ID_UHPHS in the CPU specific header files. 26 */ 27 #define ATMEL_ID_UHP ATMEL_ID_UHPHS 28 29 /* 30 * Specify the clock enable bit in the PMC_SCER register. 31 */ 32 #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP 33 34 /* SDRAM */ 35 #define CONFIG_NR_DRAM_BANKS 1 36 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS 37 #define CONFIG_SYS_SDRAM_SIZE 0x10000000 38 39 #ifdef CONFIG_SPL_BUILD 40 #define CONFIG_SYS_INIT_SP_ADDR 0x310000 41 #else 42 #define CONFIG_SYS_INIT_SP_ADDR \ 43 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 44 #endif 45 46 /* NAND flash */ 47 #define CONFIG_CMD_NAND 48 49 #ifdef CONFIG_CMD_NAND 50 #define CONFIG_NAND_ATMEL 51 #define CONFIG_SYS_MAX_NAND_DEVICE 1 52 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 53 /* our ALE is AD21 */ 54 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 55 /* our CLE is AD22 */ 56 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 57 #define CONFIG_SYS_NAND_ONFI_DETECTION 58 /* PMECC & PMERRLOC */ 59 #define CONFIG_ATMEL_NAND_HWECC 60 #define CONFIG_ATMEL_NAND_HW_PMECC 61 #define CONFIG_PMECC_CAP 4 62 #define CONFIG_PMECC_SECTOR_SIZE 512 63 #define CONFIG_CMD_NAND_TRIMFFS 64 #define CONFIG_CMD_MTDPARTS 65 66 #define CONFIG_MTD_DEVICE 67 #define CONFIG_MTD_PARTITIONS 68 #define CONFIG_RBTREE 69 #define CONFIG_LZO 70 #define CONFIG_CMD_UBIFS 71 #endif 72 73 /* Ethernet Hardware */ 74 #define CONFIG_MACB 75 #define CONFIG_RMII 76 #define CONFIG_NET_RETRY_COUNT 20 77 #define CONFIG_MACB_SEARCH_PHY 78 #define CONFIG_RGMII 79 #define CONFIG_PHYLIB 80 81 /* MMC */ 82 83 #ifdef CONFIG_CMD_MMC 84 #define CONFIG_GENERIC_MMC 85 #define CONFIG_GENERIC_ATMEL_MCI 86 #define CONFIG_ATMEL_MCI_8BIT 87 #endif 88 89 /* USB */ 90 91 #ifdef CONFIG_CMD_USB 92 #define CONFIG_USB_ATMEL 93 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL 94 #define CONFIG_USB_OHCI_NEW 95 #define CONFIG_SYS_USB_OHCI_CPU_INIT 96 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI 97 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "SAMA5D3 Xplained" 98 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 99 #endif 100 101 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) 102 #define CONFIG_FAT_WRITE 103 #endif 104 105 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 106 107 #if CONFIG_SYS_USE_NANDFLASH 108 /* override the bootcmd, bootargs and other configuration for nandflash env */ 109 #elif CONFIG_SYS_USE_MMC 110 /* override the bootcmd, bootargs and other configuration for sd/mmc env */ 111 #else 112 #define CONFIG_ENV_IS_NOWHERE 113 #endif 114 115 /* SPL */ 116 #define CONFIG_SPL_FRAMEWORK 117 #define CONFIG_SPL_TEXT_BASE 0x300000 118 #define CONFIG_SPL_MAX_SIZE 0x10000 119 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 120 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 121 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 122 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 123 124 #define CONFIG_SPL_BOARD_INIT 125 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 126 127 #ifdef CONFIG_SYS_USE_MMC 128 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds 129 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 130 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 131 132 #elif CONFIG_SYS_USE_NANDFLASH 133 #define CONFIG_SPL_NAND_DRIVERS 134 #define CONFIG_SPL_NAND_BASE 135 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 136 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 137 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 138 #define CONFIG_SYS_NAND_PAGE_COUNT 64 139 #define CONFIG_SYS_NAND_OOBSIZE 64 140 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 141 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 142 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER 143 144 #endif 145 146 #endif 147