1 /*
2  * Configuration file for the SAMA5D2 Xplained Board.
3  *
4  * Copyright (C) 2015 Atmel Corporation
5  *		      Wenyou Yang <wenyou.yang@atmel.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #include "at91-sama5_common.h"
14 
15 #define CONFIG_MISC_INIT_R
16 
17 /* SDRAM */
18 #define CONFIG_NR_DRAM_BANKS		1
19 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
20 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
21 
22 #ifdef CONFIG_SPL_BUILD
23 #define CONFIG_SYS_INIT_SP_ADDR		0x218000
24 #else
25 #define CONFIG_SYS_INIT_SP_ADDR \
26 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
27 #endif
28 
29 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
30 
31 /* SerialFlash */
32 #ifdef CONFIG_CMD_SF
33 #define CONFIG_SF_DEFAULT_BUS		0
34 #define CONFIG_SF_DEFAULT_CS		0
35 #define CONFIG_SF_DEFAULT_SPEED		30000000
36 #endif
37 
38 /* I2C */
39 #define AT24MAC_ADDR		0x5c
40 #define AT24MAC_REG		0x9a
41 
42 /* LCD */
43 
44 #ifdef CONFIG_LCD
45 #define LCD_BPP				LCD_COLOR16
46 #define LCD_OUTPUT_BPP                  24
47 #define CONFIG_LCD_LOGO
48 #define CONFIG_LCD_INFO
49 #define CONFIG_LCD_INFO_BELOW_LOGO
50 #define CONFIG_ATMEL_HLCD
51 #define CONFIG_ATMEL_LCD_RGB565
52 #endif
53 
54 #ifdef CONFIG_SYS_USE_MMC
55 
56 /* bootstrap + u-boot + env in sd card */
57 #undef CONFIG_BOOTCOMMAND
58 
59 #define CONFIG_BOOTCOMMAND	"fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \
60 				"fatload mmc 1:1 0x22000000 zImage; " \
61 				"bootz 0x22000000 - 0x21000000"
62 
63 #endif
64 
65 /* SPL */
66 #define CONFIG_SPL_FRAMEWORK
67 #define CONFIG_SPL_TEXT_BASE		0x200000
68 #define CONFIG_SPL_MAX_SIZE		0x18000
69 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
70 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
71 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
72 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
73 
74 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
75 
76 #ifdef CONFIG_SYS_USE_MMC
77 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
78 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
79 
80 #elif CONFIG_SYS_USE_SERIALFLASH
81 #define CONFIG_SPL_SPI_LOAD
82 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
83 
84 #endif
85 
86 #endif
87