1 /* 2 * Configuration file for the SAMA5D2 Xplained Board. 3 * 4 * Copyright (C) 2015 Atmel Corporation 5 * Wenyou Yang <wenyou.yang@atmel.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* No NOR flash, this definition should put before common header */ 14 #define CONFIG_SYS_NO_FLASH 15 16 #include "at91-sama5_common.h" 17 18 /* serial console */ 19 #define CONFIG_ATMEL_USART 20 #define CONFIG_USART_BASE ATMEL_BASE_UART1 21 #define CONFIG_USART_ID ATMEL_ID_UART1 22 23 /* SDRAM */ 24 #define CONFIG_NR_DRAM_BANKS 1 25 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS 26 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 27 28 #ifdef CONFIG_SPL_BUILD 29 #define CONFIG_SYS_INIT_SP_ADDR 0x210000 30 #else 31 #define CONFIG_SYS_INIT_SP_ADDR \ 32 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 33 #endif 34 35 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 36 37 #undef CONFIG_AT91_GPIO 38 #define CONFIG_ATMEL_PIO4 39 40 /* SerialFlash */ 41 #ifdef CONFIG_CMD_SF 42 #define CONFIG_ATMEL_SPI 43 #define CONFIG_ATMEL_SPI0 44 #define CONFIG_SPI_FLASH_ATMEL 45 #define CONFIG_SF_DEFAULT_BUS 0 46 #define CONFIG_SF_DEFAULT_CS 0 47 #define CONFIG_SF_DEFAULT_SPEED 30000000 48 #endif 49 50 /* NAND flash */ 51 #undef CONFIG_CMD_NAND 52 53 /* MMC */ 54 55 #ifdef CONFIG_CMD_MMC 56 #define CONFIG_MMC 57 #define CONFIG_GENERIC_MMC 58 #define CONFIG_SDHCI 59 #define CONFIG_ATMEL_SDHCI 60 #define CONFIG_ATMEL_SDHCI0 61 #define CONFIG_ATMEL_SDHCI1 62 #define CONFIG_SUPPORT_EMMC_BOOT 63 #endif 64 65 /* USB */ 66 67 #ifdef CONFIG_CMD_USB 68 #define CONFIG_USB_EHCI 69 #define CONFIG_USB_EHCI_ATMEL 70 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 71 #define CONFIG_USB_STORAGE 72 #endif 73 74 /* USB device */ 75 #define CONFIG_USB_ETHER 76 #define CONFIG_USB_ETH_RNDIS 77 #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2 XPlained" 78 79 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) 80 #define CONFIG_DOS_PARTITION 81 #endif 82 83 /* Ethernet Hardware */ 84 #define CONFIG_MACB 85 #define CONFIG_RMII 86 #define CONFIG_NET_RETRY_COUNT 20 87 #define CONFIG_MACB_SEARCH_PHY 88 89 /* LCD */ 90 /* #define CONFIG_LCD */ 91 92 #ifdef CONFIG_LCD 93 #define LCD_BPP LCD_COLOR16 94 #define LCD_OUTPUT_BPP 24 95 #define CONFIG_LCD_LOGO 96 #define CONFIG_LCD_INFO 97 #define CONFIG_LCD_INFO_BELOW_LOGO 98 #define CONFIG_SYS_WHITE_ON_BLACK 99 #define CONFIG_ATMEL_HLCD 100 #define CONFIG_ATMEL_LCD_RGB565 101 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 102 #endif 103 104 #ifdef CONFIG_SYS_USE_MMC 105 106 /* bootstrap + u-boot + env in sd card */ 107 #undef FAT_ENV_DEVICE_AND_PART 108 #undef CONFIG_BOOTCOMMAND 109 110 #define FAT_ENV_DEVICE_AND_PART "1" 111 #define CONFIG_BOOTCOMMAND "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \ 112 "fatload mmc 1:1 0x22000000 zImage; " \ 113 "bootz 0x22000000 - 0x21000000" 114 #undef CONFIG_BOOTARGS 115 #define CONFIG_BOOTARGS \ 116 "console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" 117 118 #endif 119 120 /* SPL */ 121 #define CONFIG_SPL_FRAMEWORK 122 #define CONFIG_SPL_TEXT_BASE 0x200000 123 #define CONFIG_SPL_MAX_SIZE 0x10000 124 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 125 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 126 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 127 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 128 129 #define CONFIG_SPL_LIBCOMMON_SUPPORT 130 #define CONFIG_SPL_LIBGENERIC_SUPPORT 131 #define CONFIG_SPL_GPIO_SUPPORT 132 #define CONFIG_SPL_SERIAL_SUPPORT 133 134 #define CONFIG_SPL_BOARD_INIT 135 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 136 137 #ifdef CONFIG_SYS_USE_MMC 138 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds 139 #define CONFIG_SPL_MMC_SUPPORT 140 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 141 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 142 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 143 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 144 #define CONFIG_SPL_FAT_SUPPORT 145 #define CONFIG_SPL_LIBDISK_SUPPORT 146 147 #elif CONFIG_SYS_USE_SERIALFLASH 148 #define CONFIG_SPL_SPI_SUPPORT 149 #define CONFIG_SPL_SPI_FLASH_SUPPORT 150 #define CONFIG_SPL_SPI_LOAD 151 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 152 153 #endif 154 155 #endif 156