xref: /openbmc/u-boot/include/configs/salvator-x.h (revision 6702488c)
1 /*
2  * include/configs/salvator-x.h
3  *     This file is Salvator-X board configuration.
4  *
5  * Copyright (C) 2015 Renesas Electronics Corporation
6  *
7  * SPDX-License-Identifier: GPL-2.0+
8  */
9 
10 #ifndef __SALVATOR_X_H
11 #define __SALVATOR_X_H
12 
13 #undef DEBUG
14 
15 #define CONFIG_RCAR_BOARD_STRING "Salvator-X"
16 
17 #include "rcar-gen3-common.h"
18 
19 /* SCIF */
20 #define CONFIG_SCIF_CONSOLE
21 #define CONFIG_CONS_SCIF2
22 #define CONFIG_CONS_INDEX	2
23 #define CONFIG_SH_SCIF_CLK_FREQ        CONFIG_S3D4_CLK_FREQ
24 
25 /* [A] Hyper Flash */
26 /* use to RPC(SPI Multi I/O Bus Controller) */
27 
28 /* Ethernet RAVB */
29 #define CONFIG_NET_MULTI
30 #define CONFIG_PHY_MICREL
31 #define CONFIG_BITBANGMII
32 #define CONFIG_BITBANGMII_MULTI
33 
34 /* Board Clock */
35 /* XTAL_CLK : 33.33MHz */
36 #define RCAR_XTAL_CLK		33333333u
37 #define CONFIG_SYS_CLK_FREQ	RCAR_XTAL_CLK
38 /* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
39 /* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz          */
40 #define CONFIG_CP_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
41 #define CONFIG_PLL1_CLK_FREQ	(CONFIG_SYS_CLK_FREQ * 192 / 2)
42 #define CONFIG_S3D2_CLK_FREQ	(266666666u/2)
43 #define CONFIG_S3D4_CLK_FREQ	(266666666u/4)
44 
45 /* Generic Timer Definitions (use in assembler source) */
46 #define COUNTER_FREQUENCY	0xFE502A	/* 16.66MHz from CPclk */
47 
48 /* Generic Interrupt Controller Definitions */
49 #define CONFIG_GICV2
50 #define GICD_BASE	0xF1010000
51 #define GICC_BASE	0xF1020000
52 
53 /* i2c */
54 #define CONFIG_SYS_I2C
55 #define CONFIG_SYS_I2C_SH
56 #define CONFIG_SYS_I2C_SLAVE		0x60
57 #define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	1
58 #define CONFIG_SYS_I2C_SH_SPEED0	400000
59 #define CONFIG_SH_I2C_DATA_HIGH		4
60 #define CONFIG_SH_I2C_DATA_LOW		5
61 #define CONFIG_SH_I2C_CLOCK		10000000
62 
63 #define CONFIG_SYS_I2C_POWERIC_ADDR	0x30
64 
65 /* USB */
66 #ifdef CONFIG_R8A7795
67 #define CONFIG_USB_MAX_CONTROLLER_COUNT	3
68 #else
69 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
70 #endif
71 
72 /* SDHI */
73 #define CONFIG_SH_SDHI_FREQ		200000000
74 
75 /* Environment in eMMC, at the end of 2nd "boot sector" */
76 #define CONFIG_ENV_IS_IN_MMC
77 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
78 #define CONFIG_SYS_MMC_ENV_DEV		1
79 #define CONFIG_SYS_MMC_ENV_PART		2
80 
81 /* Module stop status bits */
82 /* MFIS, SCIF1 */
83 #define CONFIG_SMSTP2_ENA	0x00002040
84 /* SCIF2 */
85 #define CONFIG_SMSTP3_ENA	0x00000400
86 /* INTC-AP, IRQC */
87 #define CONFIG_SMSTP4_ENA	0x00000180
88 
89 #endif /* __SALVATOR_X_H */
90