1 /* 2 * (C) Copyright 2015-2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Configuration settings for the Freescale S32V234 EVB board. 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #ifndef CONFIG_SPL_BUILD 13 #include <config_distro_defaults.h> 14 #endif 15 16 #include <asm/arch/imx-regs.h> 17 18 #define CONFIG_S32V234 19 #define CONFIG_DM 20 21 /* Config GIC */ 22 #define CONFIG_GICV2 23 #define GICD_BASE 0x7D001000 24 #define GICC_BASE 0x7D002000 25 26 #define CONFIG_REMAKE_ELF 27 #undef CONFIG_RUN_FROM_IRAM_ONLY 28 29 #define CONFIG_RUN_FROM_DDR1 30 #undef CONFIG_RUN_FROM_DDR0 31 32 /* Run by default from DDR1 */ 33 #ifdef CONFIG_RUN_FROM_DDR0 34 #define DDR_BASE_ADDR 0x80000000 35 #else 36 #define DDR_BASE_ADDR 0xC0000000 37 #endif 38 39 #define CONFIG_MACH_TYPE 4146 40 41 #define CONFIG_SKIP_LOWLEVEL_INIT 42 43 /* Config CACHE */ 44 #define CONFIG_CMD_CACHE 45 46 #define CONFIG_SYS_FULL_VA 47 48 /* Enable passing of ATAGs */ 49 #define CONFIG_CMDLINE_TAG 50 51 /* SMP Spin Table Definitions */ 52 #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 53 54 /* Generic Timer Definitions */ 55 #define COUNTER_FREQUENCY (1000000000) /* 1000MHz */ 56 #define CONFIG_SYS_FSL_ERRATUM_A008585 57 58 /* Size of malloc() pool */ 59 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 60 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024) 61 #else 62 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 63 #endif 64 #define CONFIG_BOARD_EARLY_INIT_F 65 66 #define CONFIG_DM_SERIAL 67 #define CONFIG_FSL_LINFLEXUART 68 #define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR 69 70 #define CONFIG_DEBUG_UART_LINFLEXUART 71 #define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE 72 73 /* Allow to overwrite serial and ethaddr */ 74 #define CONFIG_ENV_OVERWRITE 75 #define CONFIG_SYS_UART_PORT (1) 76 #define CONFIG_BAUDRATE 115200 77 78 #undef CONFIG_CMD_IMLS 79 80 #define CONFIG_MMC 81 #define CONFIG_FSL_ESDHC 82 #define CONFIG_FSL_USDHC 83 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR 84 #define CONFIG_SYS_FSL_ESDHC_NUM 1 85 86 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 87 88 #define CONFIG_CMD_MMC 89 #define CONFIG_GENERIC_MMC 90 /* #define CONFIG_CMD_EXT2 EXT2 Support */ 91 #define CONFIG_CMD_FAT /* FAT support */ 92 #define CONFIG_DOS_PARTITION 93 94 #if 0 95 96 /* Ethernet config */ 97 #define CONFIG_CMD_PING 98 #define CONFIG_CMD_DHCP 99 #define CONFIG_CMD_MII 100 #define CONFIG_FEC_MXC 101 #define CONFIG_MII 102 #define IMX_FEC_BASE ENET_BASE_ADDR 103 #define CONFIG_FEC_XCV_TYPE RMII 104 #define CONFIG_FEC_MXC_PHYADDR 0 105 #define CONFIG_PHYLIB 106 #define CONFIG_PHY_MICREL 107 #endif 108 109 #if 0 /* Disable until the I2C driver will be updated */ 110 111 /* I2C Configs */ 112 #define CONFIG_CMD_I2C 113 #define CONFIG_HARD_I2C 114 #define CONFIG_I2C_MXC 115 #define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR 116 #define CONFIG_SYS_I2C_SPEED 100000 117 #endif 118 119 #if 0 /* Disable until the FLASH will be implemented */ 120 #define CONFIG_SYS_USE_NAND 121 #endif 122 123 #ifdef CONFIG_SYS_USE_NAND 124 /* Nand Flash Configs */ 125 #define CONFIG_CMD_NAND 126 #define CONFIG_JFFS2_NAND 127 #define MTD_NAND_FSL_NFC_SWECC 1 128 #define CONFIG_NAND_FSL_NFC 129 #define CONFIG_SYS_NAND_BASE 0x400E0000 130 #define CONFIG_SYS_MAX_NAND_DEVICE 1 131 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE 132 #define CONFIG_SYS_NAND_SELECT_DEVICE 133 #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ 134 #endif 135 136 #define CONFIG_CMD_DHCP 137 138 #define CONFIG_LOADADDR 0xC307FFC0 139 #define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" 140 141 #define CONFIG_CMD_ENV 142 #define CONFIG_EXTRA_ENV_SETTINGS \ 143 "boot_scripts=boot.scr.uimg boot.scr\0" \ 144 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 145 "console=ttyLF0,115200\0" \ 146 "fdt_file=s32v234-evb.dtb\0" \ 147 "fdt_high=0xffffffff\0" \ 148 "initrd_high=0xffffffff\0" \ 149 "fdt_addr_r=0xC2000000\0" \ 150 "kernel_addr_r=0xC307FFC0\0" \ 151 "ramdisk_addr_r=0xC4000000\0" \ 152 "ramdisk=rootfs.uimg\0"\ 153 "ip_dyn=yes\0" \ 154 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 155 "update_sd_firmware_filename=u-boot.imx\0" \ 156 "update_sd_firmware=" \ 157 "if test ${ip_dyn} = yes; then " \ 158 "setenv get_cmd dhcp; " \ 159 "else " \ 160 "setenv get_cmd tftp; " \ 161 "fi; " \ 162 "if mmc dev ${mmcdev}; then " \ 163 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 164 "setexpr fw_sz ${filesize} / 0x200; " \ 165 "setexpr fw_sz ${fw_sz} + 1; " \ 166 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 167 "fi; " \ 168 "fi\0" \ 169 "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \ 170 "jtagboot=echo Booting using jtag...; " \ 171 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 172 "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ 173 "run loaduimage; run loadramdisk; run loadfdt;"\ 174 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 175 "boot_net_usb_start=true\0" \ 176 BOOTENV 177 178 #define BOOT_TARGET_DEVICES(func) \ 179 func(MMC, mmc, 1) \ 180 func(MMC, mmc, 0) \ 181 func(DHCP, dhcp, na) 182 183 #define CONFIG_BOOTCOMMAND \ 184 "run distro_bootcmd" 185 186 #include <config_distro_bootcmd.h> 187 188 /* Miscellaneous configurable options */ 189 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 190 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 191 #define CONFIG_SYS_PROMPT "=> " 192 #undef CONFIG_AUTO_COMPLETE 193 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 194 #define CONFIG_SYS_PBSIZE \ 195 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 196 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 197 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 198 #define CONFIG_CMDLINE_EDITING 199 200 #define CONFIG_CMD_MEMTEST 201 #define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR) 202 #define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000) 203 204 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 205 #define CONFIG_SYS_HZ 1000 206 207 #define CONFIG_SYS_TEXT_BASE 0x3E800000 /* SDRAM */ 208 209 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 210 #define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) 211 #endif 212 213 /* 214 * Stack sizes 215 * The stack sizes are set up in start.S using the settings below 216 */ 217 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 218 219 #if 0 220 /* Configure PXE */ 221 #define CONFIG_CMD_PXE 222 #define CONFIG_BOOTP_PXE 223 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 224 #endif 225 226 /* Physical memory map */ 227 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */ 228 #define CONFIG_NR_DRAM_BANKS 1 229 #define PHYS_SDRAM (DDR_BASE_ADDR) 230 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 231 232 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 233 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 234 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 235 236 #define CONFIG_SYS_INIT_SP_OFFSET \ 237 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 238 #define CONFIG_SYS_INIT_SP_ADDR \ 239 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 240 241 /* FLASH and environment organization */ 242 #define CONFIG_SYS_NO_FLASH 243 244 #define CONFIG_ENV_SIZE (8 * 1024) 245 #define CONFIG_ENV_IS_IN_MMC 246 247 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 248 #define CONFIG_SYS_MMC_ENV_DEV 0 249 250 251 #define CONFIG_BOOTP_BOOTFILESIZE 252 #define CONFIG_BOOTP_BOOTPATH 253 #define CONFIG_BOOTP_GATEWAY 254 #define CONFIG_BOOTP_HOSTNAME 255 256 #endif 257