1 /* 2 * (C) Copyright 2015-2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Configuration settings for the Freescale S32V234 EVB board. 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #ifndef CONFIG_SPL_BUILD 13 #include <config_distro_defaults.h> 14 #endif 15 16 #include <asm/arch/imx-regs.h> 17 18 #define CONFIG_S32V234 19 #define CONFIG_DM 20 21 #define CONFIG_DISPLAY_CPUINFO 22 #define CONFIG_DISPLAY_BOARDINFO 23 24 /* Config GIC */ 25 #define CONFIG_GICV2 26 #define GICD_BASE 0x7D001000 27 #define GICC_BASE 0x7D002000 28 29 #define CONFIG_REMAKE_ELF 30 #undef CONFIG_RUN_FROM_IRAM_ONLY 31 32 #define CONFIG_RUN_FROM_DDR1 33 #undef CONFIG_RUN_FROM_DDR0 34 35 /* Run by default from DDR1 */ 36 #ifdef CONFIG_RUN_FROM_DDR0 37 #define DDR_BASE_ADDR 0x80000000 38 #else 39 #define DDR_BASE_ADDR 0xC0000000 40 #endif 41 42 #define CONFIG_MACH_TYPE 4146 43 44 #define CONFIG_SKIP_LOWLEVEL_INIT 45 46 /* Config CACHE */ 47 #define CONFIG_CMD_CACHE 48 49 #define CONFIG_SYS_FULL_VA 50 51 /* Enable passing of ATAGs */ 52 #define CONFIG_CMDLINE_TAG 53 54 /* SMP Spin Table Definitions */ 55 #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 56 57 /* Generic Timer Definitions */ 58 #define COUNTER_FREQUENCY (1000000000) /* 1000MHz */ 59 #define CONFIG_SYS_FSL_ERRATUM_A008585 60 61 /* Size of malloc() pool */ 62 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 63 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024) 64 #else 65 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 66 #endif 67 #define CONFIG_BOARD_EARLY_INIT_F 68 69 #define CONFIG_DM_SERIAL 70 #define CONFIG_FSL_LINFLEXUART 71 #define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR 72 73 #define CONFIG_DEBUG_UART_LINFLEXUART 74 #define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE 75 76 /* Allow to overwrite serial and ethaddr */ 77 #define CONFIG_ENV_OVERWRITE 78 #define CONFIG_SYS_UART_PORT (1) 79 #define CONFIG_BAUDRATE 115200 80 81 #undef CONFIG_CMD_IMLS 82 83 #define CONFIG_MMC 84 #define CONFIG_FSL_ESDHC 85 #define CONFIG_FSL_USDHC 86 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR 87 #define CONFIG_SYS_FSL_ESDHC_NUM 1 88 89 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 90 91 #define CONFIG_CMD_MMC 92 #define CONFIG_GENERIC_MMC 93 /* #define CONFIG_CMD_EXT2 EXT2 Support */ 94 #define CONFIG_CMD_FAT /* FAT support */ 95 #define CONFIG_DOS_PARTITION 96 97 #if 0 98 99 /* Ethernet config */ 100 #define CONFIG_CMD_PING 101 #define CONFIG_CMD_DHCP 102 #define CONFIG_CMD_MII 103 #define CONFIG_FEC_MXC 104 #define CONFIG_MII 105 #define IMX_FEC_BASE ENET_BASE_ADDR 106 #define CONFIG_FEC_XCV_TYPE RMII 107 #define CONFIG_FEC_MXC_PHYADDR 0 108 #define CONFIG_PHYLIB 109 #define CONFIG_PHY_MICREL 110 #endif 111 112 #if 0 /* Disable until the I2C driver will be updated */ 113 114 /* I2C Configs */ 115 #define CONFIG_CMD_I2C 116 #define CONFIG_HARD_I2C 117 #define CONFIG_I2C_MXC 118 #define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR 119 #define CONFIG_SYS_I2C_SPEED 100000 120 #endif 121 122 #if 0 /* Disable until the FLASH will be implemented */ 123 #define CONFIG_SYS_USE_NAND 124 #endif 125 126 #ifdef CONFIG_SYS_USE_NAND 127 /* Nand Flash Configs */ 128 #define CONFIG_CMD_NAND 129 #define CONFIG_JFFS2_NAND 130 #define MTD_NAND_FSL_NFC_SWECC 1 131 #define CONFIG_NAND_FSL_NFC 132 #define CONFIG_SYS_NAND_BASE 0x400E0000 133 #define CONFIG_SYS_MAX_NAND_DEVICE 1 134 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE 135 #define CONFIG_SYS_NAND_SELECT_DEVICE 136 #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ 137 #endif 138 139 #define CONFIG_CMD_DHCP 140 141 #define CONFIG_LOADADDR 0xC307FFC0 142 #define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" 143 144 #define CONFIG_CMD_ENV 145 #define CONFIG_EXTRA_ENV_SETTINGS \ 146 "boot_scripts=boot.scr.uimg boot.scr\0" \ 147 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 148 "console=ttyLF0,115200\0" \ 149 "fdt_file=s32v234-evb.dtb\0" \ 150 "fdt_high=0xffffffff\0" \ 151 "initrd_high=0xffffffff\0" \ 152 "fdt_addr_r=0xC2000000\0" \ 153 "kernel_addr_r=0xC307FFC0\0" \ 154 "ramdisk_addr_r=0xC4000000\0" \ 155 "ramdisk=rootfs.uimg\0"\ 156 "ip_dyn=yes\0" \ 157 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 158 "update_sd_firmware_filename=u-boot.imx\0" \ 159 "update_sd_firmware=" \ 160 "if test ${ip_dyn} = yes; then " \ 161 "setenv get_cmd dhcp; " \ 162 "else " \ 163 "setenv get_cmd tftp; " \ 164 "fi; " \ 165 "if mmc dev ${mmcdev}; then " \ 166 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 167 "setexpr fw_sz ${filesize} / 0x200; " \ 168 "setexpr fw_sz ${fw_sz} + 1; " \ 169 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 170 "fi; " \ 171 "fi\0" \ 172 "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \ 173 "jtagboot=echo Booting using jtag...; " \ 174 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 175 "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ 176 "run loaduimage; run loadramdisk; run loadfdt;"\ 177 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 178 "boot_net_usb_start=true\0" \ 179 BOOTENV 180 181 #define BOOT_TARGET_DEVICES(func) \ 182 func(MMC, mmc, 1) \ 183 func(MMC, mmc, 0) \ 184 func(DHCP, dhcp, na) 185 186 #define CONFIG_BOOTCOMMAND \ 187 "run distro_bootcmd" 188 189 #include <config_distro_bootcmd.h> 190 191 /* Miscellaneous configurable options */ 192 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 193 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 194 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 195 #define CONFIG_SYS_PROMPT "=> " 196 #undef CONFIG_AUTO_COMPLETE 197 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 198 #define CONFIG_SYS_PBSIZE \ 199 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 200 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 201 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 202 #define CONFIG_CMDLINE_EDITING 203 204 #define CONFIG_CMD_MEMTEST 205 #define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR) 206 #define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000) 207 208 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 209 #define CONFIG_SYS_HZ 1000 210 211 #define CONFIG_SYS_TEXT_BASE 0x3E800000 /* SDRAM */ 212 213 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 214 #define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) 215 #endif 216 217 /* 218 * Stack sizes 219 * The stack sizes are set up in start.S using the settings below 220 */ 221 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 222 223 #if 0 224 /* Configure PXE */ 225 #define CONFIG_CMD_PXE 226 #define CONFIG_BOOTP_PXE 227 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 228 #endif 229 230 /* Physical memory map */ 231 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */ 232 #define CONFIG_NR_DRAM_BANKS 1 233 #define PHYS_SDRAM (DDR_BASE_ADDR) 234 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 235 236 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 237 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 238 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 239 240 #define CONFIG_SYS_INIT_SP_OFFSET \ 241 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 242 #define CONFIG_SYS_INIT_SP_ADDR \ 243 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 244 245 /* FLASH and environment organization */ 246 #define CONFIG_SYS_NO_FLASH 247 248 #define CONFIG_ENV_SIZE (8 * 1024) 249 #define CONFIG_ENV_IS_IN_MMC 250 251 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 252 #define CONFIG_SYS_MMC_ENV_DEV 0 253 254 255 #define CONFIG_BOOTP_BOOTFILESIZE 256 #define CONFIG_BOOTP_BOOTPATH 257 #define CONFIG_BOOTP_GATEWAY 258 #define CONFIG_BOOTP_HOSTNAME 259 260 #endif 261