1 /* 2 * (C) Copyright 2015-2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Configuration settings for the Freescale S32V234 EVB board. 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #ifndef CONFIG_SPL_BUILD 13 #include <config_distro_defaults.h> 14 #endif 15 16 #include <asm/arch/imx-regs.h> 17 18 #define CONFIG_S32V234 19 #define CONFIG_DM 20 21 /* Config GIC */ 22 #define CONFIG_GICV2 23 #define GICD_BASE 0x7D001000 24 #define GICC_BASE 0x7D002000 25 26 #define CONFIG_REMAKE_ELF 27 #undef CONFIG_RUN_FROM_IRAM_ONLY 28 29 #define CONFIG_RUN_FROM_DDR1 30 #undef CONFIG_RUN_FROM_DDR0 31 32 /* Run by default from DDR1 */ 33 #ifdef CONFIG_RUN_FROM_DDR0 34 #define DDR_BASE_ADDR 0x80000000 35 #else 36 #define DDR_BASE_ADDR 0xC0000000 37 #endif 38 39 #define CONFIG_MACH_TYPE 4146 40 41 #define CONFIG_SKIP_LOWLEVEL_INIT 42 43 /* Config CACHE */ 44 #define CONFIG_CMD_CACHE 45 46 #define CONFIG_SYS_FULL_VA 47 48 /* Enable passing of ATAGs */ 49 #define CONFIG_CMDLINE_TAG 50 51 /* SMP Spin Table Definitions */ 52 #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 53 54 /* Generic Timer Definitions */ 55 #define COUNTER_FREQUENCY (1000000000) /* 1000MHz */ 56 #define CONFIG_SYS_FSL_ERRATUM_A008585 57 58 /* Size of malloc() pool */ 59 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 60 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024) 61 #else 62 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 63 #endif 64 #define CONFIG_BOARD_EARLY_INIT_F 65 66 #define CONFIG_DM_SERIAL 67 #define CONFIG_FSL_LINFLEXUART 68 #define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR 69 70 #define CONFIG_DEBUG_UART_LINFLEXUART 71 #define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE 72 73 /* Allow to overwrite serial and ethaddr */ 74 #define CONFIG_ENV_OVERWRITE 75 #define CONFIG_SYS_UART_PORT (1) 76 #define CONFIG_BAUDRATE 115200 77 78 #undef CONFIG_CMD_IMLS 79 80 #define CONFIG_MMC 81 #define CONFIG_FSL_ESDHC 82 #define CONFIG_FSL_USDHC 83 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR 84 #define CONFIG_SYS_FSL_ESDHC_NUM 1 85 86 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 87 88 #define CONFIG_CMD_MMC 89 #define CONFIG_GENERIC_MMC 90 /* #define CONFIG_CMD_EXT2 EXT2 Support */ 91 #define CONFIG_DOS_PARTITION 92 93 #if 0 94 95 /* Ethernet config */ 96 #define CONFIG_CMD_PING 97 #define CONFIG_CMD_MII 98 #define CONFIG_FEC_MXC 99 #define CONFIG_MII 100 #define IMX_FEC_BASE ENET_BASE_ADDR 101 #define CONFIG_FEC_XCV_TYPE RMII 102 #define CONFIG_FEC_MXC_PHYADDR 0 103 #define CONFIG_PHYLIB 104 #define CONFIG_PHY_MICREL 105 #endif 106 107 #if 0 /* Disable until the I2C driver will be updated */ 108 109 /* I2C Configs */ 110 #define CONFIG_CMD_I2C 111 #define CONFIG_HARD_I2C 112 #define CONFIG_I2C_MXC 113 #define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR 114 #define CONFIG_SYS_I2C_SPEED 100000 115 #endif 116 117 #if 0 /* Disable until the FLASH will be implemented */ 118 #define CONFIG_SYS_USE_NAND 119 #endif 120 121 #ifdef CONFIG_SYS_USE_NAND 122 /* Nand Flash Configs */ 123 #define CONFIG_CMD_NAND 124 #define CONFIG_JFFS2_NAND 125 #define MTD_NAND_FSL_NFC_SWECC 1 126 #define CONFIG_NAND_FSL_NFC 127 #define CONFIG_SYS_NAND_BASE 0x400E0000 128 #define CONFIG_SYS_MAX_NAND_DEVICE 1 129 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE 130 #define CONFIG_SYS_NAND_SELECT_DEVICE 131 #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ 132 #endif 133 134 #define CONFIG_LOADADDR 0xC307FFC0 135 #define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" 136 137 #define CONFIG_CMD_ENV 138 #define CONFIG_EXTRA_ENV_SETTINGS \ 139 "boot_scripts=boot.scr.uimg boot.scr\0" \ 140 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 141 "console=ttyLF0,115200\0" \ 142 "fdt_file=s32v234-evb.dtb\0" \ 143 "fdt_high=0xffffffff\0" \ 144 "initrd_high=0xffffffff\0" \ 145 "fdt_addr_r=0xC2000000\0" \ 146 "kernel_addr_r=0xC307FFC0\0" \ 147 "ramdisk_addr_r=0xC4000000\0" \ 148 "ramdisk=rootfs.uimg\0"\ 149 "ip_dyn=yes\0" \ 150 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 151 "update_sd_firmware_filename=u-boot.imx\0" \ 152 "update_sd_firmware=" \ 153 "if test ${ip_dyn} = yes; then " \ 154 "setenv get_cmd dhcp; " \ 155 "else " \ 156 "setenv get_cmd tftp; " \ 157 "fi; " \ 158 "if mmc dev ${mmcdev}; then " \ 159 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 160 "setexpr fw_sz ${filesize} / 0x200; " \ 161 "setexpr fw_sz ${fw_sz} + 1; " \ 162 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 163 "fi; " \ 164 "fi\0" \ 165 "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \ 166 "jtagboot=echo Booting using jtag...; " \ 167 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 168 "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ 169 "run loaduimage; run loadramdisk; run loadfdt;"\ 170 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 171 "boot_net_usb_start=true\0" \ 172 BOOTENV 173 174 #define BOOT_TARGET_DEVICES(func) \ 175 func(MMC, mmc, 1) \ 176 func(MMC, mmc, 0) \ 177 func(DHCP, dhcp, na) 178 179 #define CONFIG_BOOTCOMMAND \ 180 "run distro_bootcmd" 181 182 #include <config_distro_bootcmd.h> 183 184 /* Miscellaneous configurable options */ 185 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 186 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 187 #define CONFIG_SYS_PROMPT "=> " 188 #undef CONFIG_AUTO_COMPLETE 189 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 190 #define CONFIG_SYS_PBSIZE \ 191 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 192 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 193 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 194 #define CONFIG_CMDLINE_EDITING 195 196 #define CONFIG_CMD_MEMTEST 197 #define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR) 198 #define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000) 199 200 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 201 #define CONFIG_SYS_HZ 1000 202 203 #define CONFIG_SYS_TEXT_BASE 0x3E800000 /* SDRAM */ 204 205 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 206 #define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) 207 #endif 208 209 /* 210 * Stack sizes 211 * The stack sizes are set up in start.S using the settings below 212 */ 213 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 214 215 #if 0 216 /* Configure PXE */ 217 #define CONFIG_BOOTP_PXE 218 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 219 #endif 220 221 /* Physical memory map */ 222 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */ 223 #define CONFIG_NR_DRAM_BANKS 1 224 #define PHYS_SDRAM (DDR_BASE_ADDR) 225 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 226 227 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 228 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 229 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 230 231 #define CONFIG_SYS_INIT_SP_OFFSET \ 232 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 233 #define CONFIG_SYS_INIT_SP_ADDR \ 234 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 235 236 /* FLASH and environment organization */ 237 #define CONFIG_SYS_NO_FLASH 238 239 #define CONFIG_ENV_SIZE (8 * 1024) 240 #define CONFIG_ENV_IS_IN_MMC 241 242 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 243 #define CONFIG_SYS_MMC_ENV_DEV 0 244 245 246 #define CONFIG_BOOTP_BOOTFILESIZE 247 #define CONFIG_BOOTP_BOOTPATH 248 #define CONFIG_BOOTP_GATEWAY 249 #define CONFIG_BOOTP_HOSTNAME 250 251 #endif 252