1 /* 2 * (C) Copyright 2015-2016 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Configuration settings for the Freescale S32V234 EVB board. 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #ifndef CONFIG_SPL_BUILD 13 #include <config_distro_defaults.h> 14 #endif 15 16 #include <asm/arch/imx-regs.h> 17 18 #define CONFIG_S32V234 19 #define CONFIG_DM 20 21 /* Config GIC */ 22 #define CONFIG_GICV2 23 #define GICD_BASE 0x7D001000 24 #define GICC_BASE 0x7D002000 25 26 #define CONFIG_REMAKE_ELF 27 #undef CONFIG_RUN_FROM_IRAM_ONLY 28 29 #define CONFIG_RUN_FROM_DDR1 30 #undef CONFIG_RUN_FROM_DDR0 31 32 /* Run by default from DDR1 */ 33 #ifdef CONFIG_RUN_FROM_DDR0 34 #define DDR_BASE_ADDR 0x80000000 35 #else 36 #define DDR_BASE_ADDR 0xC0000000 37 #endif 38 39 #define CONFIG_MACH_TYPE 4146 40 41 #define CONFIG_SKIP_LOWLEVEL_INIT 42 43 /* Config CACHE */ 44 #define CONFIG_CMD_CACHE 45 46 #define CONFIG_SYS_FULL_VA 47 48 /* Enable passing of ATAGs */ 49 #define CONFIG_CMDLINE_TAG 50 51 /* SMP Spin Table Definitions */ 52 #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 53 54 /* Generic Timer Definitions */ 55 #define COUNTER_FREQUENCY (1000000000) /* 1000MHz */ 56 #define CONFIG_SYS_FSL_ERRATUM_A008585 57 58 /* Size of malloc() pool */ 59 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 60 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024) 61 #else 62 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 63 #endif 64 65 #define CONFIG_DM_SERIAL 66 #define CONFIG_FSL_LINFLEXUART 67 #define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR 68 69 #define CONFIG_DEBUG_UART_LINFLEXUART 70 #define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE 71 72 /* Allow to overwrite serial and ethaddr */ 73 #define CONFIG_ENV_OVERWRITE 74 #define CONFIG_SYS_UART_PORT (1) 75 76 #undef CONFIG_CMD_IMLS 77 78 #define CONFIG_FSL_ESDHC 79 #define CONFIG_FSL_USDHC 80 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR 81 #define CONFIG_SYS_FSL_ESDHC_NUM 1 82 83 #define CONFIG_CMD_MMC 84 /* #define CONFIG_CMD_EXT2 EXT2 Support */ 85 86 #if 0 87 88 /* Ethernet config */ 89 #define CONFIG_CMD_PING 90 #define CONFIG_CMD_MII 91 #define CONFIG_FEC_MXC 92 #define CONFIG_MII 93 #define IMX_FEC_BASE ENET_BASE_ADDR 94 #define CONFIG_FEC_XCV_TYPE RMII 95 #define CONFIG_FEC_MXC_PHYADDR 0 96 #endif 97 98 #if 0 /* Disable until the FLASH will be implemented */ 99 #define CONFIG_SYS_USE_NAND 100 #endif 101 102 #ifdef CONFIG_SYS_USE_NAND 103 /* Nand Flash Configs */ 104 #define CONFIG_JFFS2_NAND 105 #define MTD_NAND_FSL_NFC_SWECC 1 106 #define CONFIG_NAND_FSL_NFC 107 #define CONFIG_SYS_NAND_BASE 0x400E0000 108 #define CONFIG_SYS_MAX_NAND_DEVICE 1 109 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE 110 #define CONFIG_SYS_NAND_SELECT_DEVICE 111 #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ 112 #endif 113 114 #define CONFIG_LOADADDR 0xC307FFC0 115 #define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" 116 117 #define CONFIG_EXTRA_ENV_SETTINGS \ 118 "boot_scripts=boot.scr.uimg boot.scr\0" \ 119 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 120 "console=ttyLF0,115200\0" \ 121 "fdt_file=s32v234-evb.dtb\0" \ 122 "fdt_high=0xffffffff\0" \ 123 "initrd_high=0xffffffff\0" \ 124 "fdt_addr_r=0xC2000000\0" \ 125 "kernel_addr_r=0xC307FFC0\0" \ 126 "ramdisk_addr_r=0xC4000000\0" \ 127 "ramdisk=rootfs.uimg\0"\ 128 "ip_dyn=yes\0" \ 129 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 130 "update_sd_firmware_filename=u-boot.imx\0" \ 131 "update_sd_firmware=" \ 132 "if test ${ip_dyn} = yes; then " \ 133 "setenv get_cmd dhcp; " \ 134 "else " \ 135 "setenv get_cmd tftp; " \ 136 "fi; " \ 137 "if mmc dev ${mmcdev}; then " \ 138 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 139 "setexpr fw_sz ${filesize} / 0x200; " \ 140 "setexpr fw_sz ${fw_sz} + 1; " \ 141 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 142 "fi; " \ 143 "fi\0" \ 144 "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \ 145 "jtagboot=echo Booting using jtag...; " \ 146 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 147 "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ 148 "run loaduimage; run loadramdisk; run loadfdt;"\ 149 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ 150 "boot_net_usb_start=true\0" \ 151 BOOTENV 152 153 #define BOOT_TARGET_DEVICES(func) \ 154 func(MMC, mmc, 1) \ 155 func(MMC, mmc, 0) \ 156 func(DHCP, dhcp, na) 157 158 #define CONFIG_BOOTCOMMAND \ 159 "run distro_bootcmd" 160 161 #include <config_distro_bootcmd.h> 162 163 /* Miscellaneous configurable options */ 164 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 165 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 166 #define CONFIG_SYS_PROMPT "=> " 167 #undef CONFIG_AUTO_COMPLETE 168 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 169 #define CONFIG_SYS_PBSIZE \ 170 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 171 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 172 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 173 #define CONFIG_CMDLINE_EDITING 174 175 #define CONFIG_CMD_MEMTEST 176 #define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR) 177 #define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000) 178 179 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 180 #define CONFIG_SYS_HZ 1000 181 182 #define CONFIG_SYS_TEXT_BASE 0x3E800000 /* SDRAM */ 183 184 #ifdef CONFIG_RUN_FROM_IRAM_ONLY 185 #define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) 186 #endif 187 188 #if 0 189 /* Configure PXE */ 190 #define CONFIG_BOOTP_PXE 191 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 192 #endif 193 194 /* Physical memory map */ 195 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */ 196 #define CONFIG_NR_DRAM_BANKS 1 197 #define PHYS_SDRAM (DDR_BASE_ADDR) 198 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 199 200 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 201 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 202 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 203 204 #define CONFIG_SYS_INIT_SP_OFFSET \ 205 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 206 #define CONFIG_SYS_INIT_SP_ADDR \ 207 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 208 209 /* environment organization */ 210 #define CONFIG_ENV_SIZE (8 * 1024) 211 212 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 213 #define CONFIG_SYS_MMC_ENV_DEV 0 214 215 216 #define CONFIG_BOOTP_BOOTFILESIZE 217 #define CONFIG_BOOTP_BOOTPATH 218 #define CONFIG_BOOTP_GATEWAY 219 #define CONFIG_BOOTP_HOSTNAME 220 221 #endif 222