xref: /openbmc/u-boot/include/configs/rut.h (revision 5ea667ea)
1 /*
2  * siemens rut
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:	GPL-2.0+
12  */
13 
14 #ifndef __CONFIG_RUT_H
15 #define __CONFIG_RUT_H
16 
17 #define CONFIG_SIEMENS_RUT
18 #define MACH_TYPE_RUT			4316
19 #define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_RUT
20 
21 #include "siemens-am33x-common.h"
22 
23 #define CONFIG_SYS_MPUCLK	600
24 #define RUT_IOCTRL_VAL	0x18b
25 #define DDR_PLL_FREQ	303
26 
27  /* Physical Memory Map */
28 #define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20) /* 256 MiB */
29 
30 /* I2C Configuration */
31 #define CONFIG_SYS_I2C_SPEED		100000
32 
33 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
34 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
35 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
36 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
37 
38 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200
39 
40 #undef CONFIG_SPL_NET_SUPPORT
41 #undef CONFIG_SPL_NET_VCI_STRING
42 #undef CONFIG_SPL_ETH_SUPPORT
43 
44 #define CONFIG_PHY_NATSEMI
45 
46 #define CONFIG_FACTORYSET
47 
48 
49 /* Watchdog */
50 #define WATCHDOG_TRIGGER_GPIO	14
51 
52 #ifndef CONFIG_SPL_BUILD
53 
54 /* Use common default */
55 #define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V1
56 
57 /* Default env settings */
58 #define CONFIG_EXTRA_ENV_SETTINGS \
59 	"hostname=rut\0" \
60 	"nand_img_size=0x500000\0" \
61 	"splashpos=m,m\0" \
62 	"optargs=fixrtc --no-log consoleblank=0 \0" \
63 	CONFIG_ENV_SETTINGS_V1 \
64 	CONFIG_ENV_SETTINGS_NAND_V1 \
65 	"mmc_dev=0\0" \
66 	"mmc_root=/dev/mmcblk0p2 rw\0" \
67 	"mmc_root_fs_type=ext4 rootwait\0" \
68 	"mmc_load_uimage=" \
69 		"mmc rescan; " \
70 		"setenv bootfile uImage;" \
71 		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
72 	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
73 	"importbootenv=echo Importing environment from mmc ...; " \
74 		"env import -t $loadaddr $filesize\0" \
75 	"mmc_args=run bootargs_defaults;" \
76 		"mtdparts default;" \
77 		"setenv bootargs ${bootargs} " \
78 		"root=${mmc_root} ${mtdparts}" \
79 		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
80 		"eth=${ethaddr} " \
81 		"\0" \
82 	"mmc_boot=run mmc_args; " \
83 		"run mmc_load_uimage; " \
84 		"bootm ${kloadaddr}\0" \
85 	""
86 
87 #ifndef CONFIG_RESTORE_FLASH
88 /* set to negative value for no autoboot */
89 #define CONFIG_BOOTDELAY		3
90 
91 #define CONFIG_BOOTCOMMAND \
92 	"if mmc rescan; then " \
93 		"echo SD/MMC found on device ${mmc_dev};" \
94 		"if run loadbootenv; then " \
95 			"echo Loaded environment from ${bootenv};" \
96 			"run importbootenv;" \
97 		"fi;" \
98 		"if test -n $uenvcmd; then " \
99 			"echo Running uenvcmd ...;" \
100 			"run uenvcmd;" \
101 		"fi;" \
102 		"if run mmc_load_uimage; then " \
103 			"run mmc_args;" \
104 			"bootm ${kloadaddr};" \
105 		"fi;" \
106 	"fi;" \
107 	"run nand_boot;" \
108 	"reset;"
109 
110 #else
111 #define CONFIG_BOOTDELAY		0
112 
113 #define CONFIG_BOOTCOMMAND			\
114 	"setenv autoload no; "			\
115 	"dhcp; "				\
116 	"if tftp 80000000 debrick.scr; then "	\
117 		"source 80000000; "		\
118 	"fi"
119 #endif
120 
121 #endif /* CONFIG_SPL_BUILD */
122 
123 #ifdef CONFIG_SPL_BUILD
124 #undef CONFIG_HW_WATCHDOG
125 #endif
126 
127 #define CONFIG_VIDEO
128 #if defined(CONFIG_VIDEO)
129 #define CONFIG_VIDEO_DA8XX
130 #define CONFIG_CFB_CONSOLE
131 #define CONFIG_VGA_AS_SINGLE_DEVICE
132 #define CONFIG_SPLASH_SCREEN
133 #define CONFIG_SPLASH_SCREEN_ALIGN
134 #define CONFIG_VIDEO_LOGO
135 #define CONFIG_VIDEO_BMP_RLE8
136 #define CONFIG_VIDEO_BMP_LOGO
137 #define CONFIG_CMD_BMP
138 #define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
139 
140 #define CONFIG_SPI
141 #define CONFIG_OMAP3_SPI
142 
143 #define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
144 #define CONFIG_ARCH_EARLY_INIT_R
145 #define CONFIG_FORMIKE
146 #define DISPL_PLL_SPREAD_SPECTRUM
147 #define CONFIG_SYS_CONSOLE_BG_COL	0xff
148 #define CONFIG_SYS_CONSOLE_FG_COL	0x00
149 #endif
150 
151 #ifndef CONFIG_SPL_BUILD
152 #define CONFIG_FIT
153 #endif
154 
155 #endif	/* ! __CONFIG_RUT_H */
156