1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2015 Rockchip Electronics Co., Ltd 4 */ 5 #ifndef __CONFIG_RK3036_COMMON_H 6 #define __CONFIG_RK3036_COMMON_H 7 8 #include <asm/arch/hardware.h> 9 #include "rockchip-common.h" 10 11 #define CONFIG_SYS_MALLOC_LEN (32 << 20) 12 #define CONFIG_SYS_CBSIZE 1024 13 #define CONFIG_SKIP_LOWLEVEL_INIT 14 15 #define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) 16 #define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */ 17 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) 18 19 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 20 #define CONFIG_SYS_LOAD_ADDR 0x60800800 21 #define CONFIG_SPL_STACK 0x10081fff 22 #define CONFIG_SPL_TEXT_BASE 0x10081000 23 24 #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10) 25 #define CONFIG_ROCKCHIP_CHIP_TAG "RK30" 26 27 /* MMC/SD IP block */ 28 #define CONFIG_BOUNCE_BUFFER 29 30 #define CONFIG_SYS_SDRAM_BASE 0x60000000 31 #define SDRAM_BANK_SIZE (512UL << 20UL) 32 #define SDRAM_MAX_SIZE (CONFIG_NR_DRAM_BANKS * SDRAM_BANK_SIZE) 33 34 #define CONFIG_SPI_FLASH 35 #define CONFIG_SPI_FLASH_GIGADEVICE 36 #define CONFIG_SF_DEFAULT_SPEED 20000000 37 38 #ifndef CONFIG_SPL_BUILD 39 /* usb otg */ 40 41 /* usb mass storage */ 42 #define CONFIG_CMD_USB_MASS_STORAGE 43 44 /* usb host */ 45 #define ENV_MEM_LAYOUT_SETTINGS \ 46 "scriptaddr=0x60000000\0" \ 47 "pxefile_addr_r=0x60100000\0" \ 48 "fdt_addr_r=0x61f00000\0" \ 49 "kernel_addr_r=0x62000000\0" \ 50 "ramdisk_addr_r=0x64000000\0" 51 52 #include <config_distro_bootcmd.h> 53 54 /* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board, 55 * so limit the fdt reallocation to that */ 56 #define CONFIG_EXTRA_ENV_SETTINGS \ 57 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ 58 "fdt_high=0x7fffffff\0" \ 59 "partitions=" PARTS_DEFAULT \ 60 ENV_MEM_LAYOUT_SETTINGS \ 61 BOOTENV 62 #endif 63 64 #define CONFIG_PREBOOT 65 66 #endif 67